Logitech z533 Multimedia Speaker system User Guide

Logitech z533 Multimedia Speaker system User Guide

Contents hide

1 What’s in the box

2 Set-up

3 Features

4 Documents / Resources

4.1 References

5 Related Posts

What’s in the box

Left Satellite

Right satellite
Subwoofer (including wired control pod)

3.5 mm to 3.5mm cable
User documentation

Set-up

Plug the right satellite cable into the black subwoofer jack.
Plug the left satellite cable into the blue subwoofer jack.

Plug the power cord into an electrical outlet.
A. If you have a 3.5mm outlet on your device:
- Insert the 3.5mm to 3.5mm cable plug from the subwoofer into the audio jack on your device
  
  B. If you have a RCA outlet on your device:
- – Insert the RCA cable on the subwoofer (the RCA cable is not included in the boxand must be purchased separately)
- – Insert the other end of the RCA cable into the RCA outlet on your device(TV, GamingConsole, etc)
  C. If you have a 3.5mm outlet on your device:
- Insert the 3.5mm to 3.5mm cable plug from the wired remote into the 3.5mm outlet on your device

Switch ON your Multimedia Speaker System z533 by turning clockwise the volume knob located on top of the wired remote. You will notice a “click” sound once the system is ON (the LED in front of the wired remote will also turn on)

Features

ADJUSTING SPEAKER VOLUME
Adjust your Multimedia Speaker System z533 volume with the wheel located on top of the wired remote (VOLUME UP – turn the wheel clockwise for volume up. VOLUME DOWN – turn wheel counter-clockwise for volume down).
USING HEADPHONES
Most types of analog headphones with a 3.5mm connector can be plugged into
the headphone jack on the right of the wired remote.
BASS ADJUSTING BASS VOLUME
To adjust the bass level of your Multimedia Speaker System z533, move the bass slider
located on the left of the wired remote