ROUTER & MODEM REFERENCE

Prolink router & modem login

Connect to the router’s Wi-Fi or Ethernet first. These links open a new tab on your device; the address may differ if the network was reconfigured.

QUICK START

Most likely login options

See every listed combination ↓

Start with the option that matches your model. Defaults apply to the factory state; use the password you chose if the device has already been set up.

Default credentials

Username: admin
Password / access: admin

Access: Web

Hurricane 6300G (Globe At Home)

Source (opens in a new tab)

Default credentials

Username: admin
Password / access: password

Access: Not specified

Model not specified; check the table for applicability.

Source (opens in a new tab)

Options are ordered by manufacturer documentation and coverage among the listed models. Hardware, firmware, and ISP versions can differ.

MODEL DETAILS

Login addresses & credentials

2 records

Passwords are case-sensitive. “Leave blank” means an empty field; “Not specified” means the source does not provide that detail. Entries without a model are brand-level references.

Models, login addresses, credentials, instructions and sources
Model / device	Login address	Username	Password / access	Notes & source
Prolink–Router · Not specified	–	admin	password	Model not specified by this list. Austin Songer list (opens in a new tab)
ProlinkHurricane 6300G (Globe At Home)Router · Web	http://192.168.1.254 (opens in a new tab)	admin	admin	Legacy ADSL modem-router that Globe At Home (Globe Telecom, Philippines) issued to broadband subscribers — first Philippines row in the dataset. Globe's current fiber lines use different ONT hardware, so this is historical/legacy coverage, not current standard-issue. Globe's official support page: "Open a web browser and enter your router's IP address: 192.168.1.254. If a window prompt appears, type admin in the username and password fields" and "Remember that your default password is 'admin'." Manufacturer (opens in a new tab) Recovery & reset instructions Not stated beyond initial login/setup-wizard steps in Globe's guide; the standard Prolink recovery method is a factory reset via the recessed button on the rear panel, which restores the documented admin/admin default.

Related login addresses

GET CONNECTED

How to reach your router

Connect your computer or phone to the router’s Wi-Fi or an Ethernet port.
Open a documented login address. If it does not load, look for the Router or Default gateway address in your device’s network settings.
Match your model and hardware revision to the table. Use the device label or your setup password when the model has no shared default.

Admin password or Wi-Fi password?

The admin password opens the router’s settings. The Wi-Fi password connects a device to the wireless network. They may be different, and an ISP or cloud account can be separate again.

If the password does not work

Check capitalization and the device label, then use the manufacturer’s password-recovery instructions. A factory reset erases settings and may require ISP setup details; follow the instructions for your exact model.

Find your model’s manual →

Sources & data

Router default-credential data from ssid.ai (Drumworks Ventures FZ), licensed CC BY 4.0. Adapted, organized and supplemented by Manuals+. The data is provided as is; manufacturers and ISPs can change defaults.

Additional factual entries: Austin Songer’s credential list and Clint Milner’s credential list. Each table entry links to its supporting source. Updated 2026-10-16.