Use the vendor app
- Username
- Not specified
- Password / access
- Vendor app or account
Access: App
JioFiber Router
Jio router & modem login
Find the login address and access method for your Jio model. Check the model details for a device-label password, a setup password, a documented default, or app access.
A shared web login address is not listed for this equipment. Check the model instructions below for app access, the device label, or your router’s gateway address.
Connect to the router’s Wi-Fi or Ethernet first. If the address does not open, look for Router or Default gateway in your network settings.
QUICK START
Most likely login options
Start with the option that matches your model. Defaults apply to the factory state; use the password you chose if the device has already been set up.
Options are ordered by manufacturer documentation and coverage among the listed models. Hardware, firmware, and ISP versions can differ.
MODEL DETAILS
Login addresses & credentials
Passwords are case-sensitive. “Leave blank” means an empty field; “Not specified” means the source does not provide that detail. Entries without a model are brand-level references.
| Model / device | Login address | Username | Password / access | Notes & source |
|---|---|---|---|---|
| JioJioFiber RouterModem / gateway · App | App / account access | Not specified | Vendor app or account | Jio's official support does not publish any web admin username/password — JioFiber is administered entirely through the MyJio / JioHome mobile apps. Any 'admin/admin' login shown on aggregator sites does not reflect how Jio documents managing the unit. Recovery & reset instructionsJioFiber is managed from the MyJio app, not a web admin page. Open MyJio, sign in with your JioFiber number, choose your Fiber account, and change the Wi-Fi name/password under the device / Wi-Fi settings (JioAirFiber uses the JioHome app with mobile number + OTP). To hard reset the ONT, hold the recessed RESET pinhole on the back for about 10 seconds until it reboots, then reconfigure Wi-Fi from the app. There is no admin/admin web login to sign into. |
No records match these filters. Try another model or clear the filters.
GET CONNECTED
How to reach your router
- Connect your computer or phone to the router’s Wi-Fi or an Ethernet port.
- Open a documented login address. If it does not load, look for the Router or Default gateway address in your device’s network settings.
- Match your model and hardware revision to the table. Use the device label or your setup password when the model has no shared default.
Admin password or Wi-Fi password?
The admin password opens the router’s settings. The Wi-Fi password connects a device to the wireless network. They may be different, and an ISP or cloud account can be separate again.
If the password does not work
Check capitalization and the device label, then use the manufacturer’s password-recovery instructions. A factory reset erases settings and may require ISP setup details; follow the instructions for your exact model.
Find your model’s manual →Sources & data
Router default-credential data from ssid.ai (Drumworks Ventures FZ), licensed CC BY 4.0. Adapted, organized and supplemented by Manuals+. The data is provided as is; manufacturers and ISPs can change defaults.
Additional factual entries: Austin Songer’s credential list and Clint Milner’s credential list. Each table entry links to its supporting source. Updated 2026-10-16.