Check the device label
- Username
- No username required
- Password / access
- Password on the device label
Access: Web
AVM FRITZ!Box (2degrees-issued, e.g. 7490), FRITZ!Box 4060, FRITZ!Box 5590 Fiber and other listed models
Source (opens in a new tab)ROUTER & MODEM REFERENCE
fritz.box router login
Find the models that use this address and the login method that applies to your device.
Open router login http://fritz.box (opens in a new tab)Open router login http://192.168.178.1 (opens in a new tab)
Connect to the router’s Wi-Fi or Ethernet first. These links open a new tab on your device; the address may differ if the network was reconfigured.
QUICK START
Most likely login options
Start with the option that matches your model. Defaults apply to the factory state; use the password you chose if the device has already been set up.
Options are ordered by manufacturer documentation and coverage among the listed models. Hardware, firmware, and ISP versions can differ.
MODEL DETAILS
Login addresses & credentials
Passwords are case-sensitive. “Leave blank” means an empty field; “Not specified” means the source does not provide that detail. Entries without a model are brand-level references.
| Model / device | Login address | Username | Password / access | Notes & source |
|---|---|---|---|---|
| 2degrees (New Zealand)AVM FRITZ!Box (2degrees-issued, e.g. 7490)Router · Web | http://fritz.box (opens in a new tab)http://192.168.178.1 (opens in a new tab) | No username required | Password on the device label | New Zealand's first ISP row beyond the already-seeded Spark — 2degrees' official 'Passwords & settings' help page states: type fritz.box (or 192.168.178.1 / 169.254.1.1) into the browser; "If you have our FRITZ!box 7490, and this is your first time logging in, you'll be asked to create a password"; otherwise "Check the bottom of your modem for a 'FRITZ!Box password' unique to your device." Recovery & reset instructionsBrowse to http://fritz.box (fallback http://192.168.178.1 or http://169.254.1.1). If this is a FRITZ!box 7490 on first login, you'll be prompted to create a password. Otherwise check the bottom of the modem for the printed 'FRITZ!Box password' and enter it — there is no separate username field. |
| AVMFRITZ!Box 4060Router · Web | http://fritz.box (opens in a new tab)http://192.168.178.1 (opens in a new tab) | No username required | Password on the device label | The FRITZ!Box 4060 is a pure tri-band Wi-Fi 6 router with no modem and no telephone ports. Its factory password is unique per device and printed on the underside label; enter it at http://fritz.box (192.168.178.1). There is no username and no admin/admin default. Recovery & reset instructionsBecause the 4060 has no phone ports, reset it from the interface: System > Backup > Load Factory Settings, then confirm and wait for the WLAN LED to stay lit. |
| AVMFRITZ!Box 5590 FiberModem / gateway · Web | http://fritz.box (opens in a new tab)http://192.168.178.1 (opens in a new tab) | No username required | Password on the device label | The FRITZ!Box 5590 Fiber is an AON/GPON fibre gateway with Wi-Fi 6 and telephony. Like other current FRITZ!Box models it carries a unique password on the base type label rather than a shared default, entered at http://fritz.box (192.168.178.1); there is no username. Recovery & reset instructionsUse System > Backup > Load Factory Settings in the interface and confirm, or dial #991*15901590* on an attached phone and hang up after about three seconds, to restore factory defaults. |
| AVMFRITZ!Box 6591 CableRouter · Web | http://fritz.box (opens in a new tab)http://192.168.178.1 (opens in a new tab) | No username required | Password on the device label | DOCSIS 3.1 cable modem router with FRITZ!Mesh support (as Master or Repeater) — distinct from the DSL/fibre FRITZ!Box models already covered. Login password is a unique per-device string printed on the type label on the bottom of the housing, not a shared default, per AVM's own knowledge base. Recovery & reset instructionsPress and hold the Reset button on the rear panel for about 5 seconds, or use System > Backup > Restore Factory Settings in the FRITZ!OS user interface. |
| AVMFRITZ!Box 6660 CableModem / gateway · Web | http://fritz.box (opens in a new tab)http://192.168.178.1 (opens in a new tab) | No username required | Password on the device label | The FRITZ!Box 6660 Cable is a DOCSIS 3.1 cable gateway with Wi-Fi 6. It has no default admin/admin: the per-unit password is printed on the type label on the base and typed into http://fritz.box (192.168.178.1). Login is password-only. Recovery & reset instructionsRestore defaults from System > Backup > Load Factory Settings in the FRITZ!OS interface, or dial #991*15901590* from a connected telephone and hang up after about three seconds. |
| AVMFRITZ!Box 7490Router · Web | http://fritz.box (opens in a new tab)http://192.168.178.1 (opens in a new tab) | No username required | Password created during setup | The FRITZ!Box 7490 is an older VDSL/ADSL flagship. Unlike current models it ships with NO password at all — on the first visit to http://fritz.box (192.168.178.1) you must set your own. There is still no username field and no admin/admin default. Recovery & reset instructionsAssign your own password on the first visit. To factory-reset, use System > Backup > Load Factory Settings in the interface, or dial #991*15901590* from an attached telephone and hang up after about three seconds. |
| AVMFRITZ!Box 7530Router · Web | http://fritz.box (opens in a new tab)http://192.168.178.1 (opens in a new tab) | No username required | Password on the device label | The FRITZ!Box 7530 is a compact VDSL/ADSL router with DECT telephony. AVM ships it with a per-device user-interface password on the underside type label (no admin/admin, no username); type it in at http://fritz.box or 192.168.178.1. Recovery & reset instructionsIn the FRITZ!OS interface choose System > Backup > Load Factory Settings and confirm; alternatively dial #991*15901590* from a connected phone and hang up after a few seconds. |
| AVMFRITZ!Box 7530 AXRouter · Web | http://fritz.box (opens in a new tab)http://192.168.178.1 (opens in a new tab) | No username required | Password on the device label | The 7530 AX adds Wi-Fi 6 to AVM's popular compact 7530 DSL router. Its user interface is protected by a unique factory password printed on the device label — not a universal default — and is reached at http://fritz.box (192.168.178.1) with a password only. Recovery & reset instructionsFactory-reset from System > Backup > Load Factory Settings in the interface, or from a connected telephone dial #991*15901590* and hang up after roughly three seconds. |
| AVMFRITZ!Box 7583Router · Web | http://fritz.box (opens in a new tab)http://192.168.178.1 (opens in a new tab) | No username required | Password on the device label | The FRITZ!Box 7583 is a VDSL supervectoring (35b) router aimed at long lines and small-business use, with DECT and telephony. It ships with a unique label password (no shared default, no username) used at http://fritz.box or 192.168.178.1. Recovery & reset instructionsReset via System > Backup > Load Factory Settings in the interface, or by dialling #991*15901590* on a connected phone and hanging up after a few seconds. |
| AVMFRITZ!Box 7590Router · Web | http://fritz.box (opens in a new tab)http://192.168.178.1 (opens in a new tab) | No username required | Password on the device label | The FRITZ!Box 7590 is AVM's flagship VDSL/ADSL router with a built-in DECT base and analog/ISDN telephony. There is no admin/admin: each unit ships with its own password (4–6 lower-case letters then 4 digits) printed on the type label underneath, entered at http://fritz.box (192.168.178.1) with no username. Recovery & reset instructionsOpen the interface and choose System > Backup > Load Factory Settings and confirm — the LEDs flash once and the WLAN LED stays lit when finished. On a connected phone you can instead dial #991*15901590* and hang up after about three seconds. |
| AVMFRITZ!Box 7590 AXRouter · Web | http://fritz.box (opens in a new tab)http://192.168.178.1 (opens in a new tab) | No username required | Password on the device label | The 7590 AX is the Wi-Fi 6 (AX) revision of AVM's 7590 DSL flagship. Login is password-only at http://fritz.box (192.168.178.1): the factory password is unique to the device and printed on its base label, so there is no shared default and no username field. Recovery & reset instructionsReset from the interface via System > Backup > Load Factory Settings (confirm, then the WLAN LED stays lit), or dial #991*15901590* on an attached telephone and hang up after roughly three seconds. |
No records match these filters. Try another model or clear the filters.
Related login addresses
GET CONNECTED
How to reach your router
- Connect your computer or phone to the router’s Wi-Fi or an Ethernet port.
- Open a documented login address. If it does not load, look for the Router or Default gateway address in your device’s network settings.
- Match your model and hardware revision to the table. Use the device label or your setup password when the model has no shared default.
Admin password or Wi-Fi password?
The admin password opens the router’s settings. The Wi-Fi password connects a device to the wireless network. They may be different, and an ISP or cloud account can be separate again.
If the password does not work
Check capitalization and the device label, then use the manufacturer’s password-recovery instructions. A factory reset erases settings and may require ISP setup details; follow the instructions for your exact model.
Find your model’s manual →Sources & data
Router default-credential data from ssid.ai (Drumworks Ventures FZ), licensed CC BY 4.0. Adapted, organized and supplemented by Manuals+. The data is provided as is; manufacturers and ISPs can change defaults.
Additional factual entries: Austin Songer’s credential list and Clint Milner’s credential list. Each table entry links to its supporting source. Updated 2026-10-16.