ROUTER & MODEM REFERENCE

dlinkrouter.local router login

Find the models that use this address and the login method that applies to your device.

Connect to the router’s Wi-Fi or Ethernet first. These links open a new tab on your device; the address may differ if the network was reconfigured.

QUICK START

Most likely login options

See every listed combination ↓

Start with the option that matches your model. Defaults apply to the factory state; use the password you chose if the device has already been set up.

Default credentials

Username: No username required
Password / access: password

Access: Web

DIR-X1870 (EXO AX1800), DIR-X3260 (EXO AX3200), DIR-X4860 (EXO AX4800) and other listed models

Source (opens in a new tab)

Options are ordered by manufacturer documentation and coverage among the listed models. Hardware, firmware, and ISP versions can differ.

MODEL DETAILS

Login addresses & credentials

4 records

Passwords are case-sensitive. “Leave blank” means an empty field; “Not specified” means the source does not provide that detail. Entries without a model are brand-level references.

Models, login addresses, credentials, instructions and sources
Model / device	Login address	Username	Password / access	Notes & source
D-LinkDIR-X1870 (EXO AX1800)Router · Web	http://dlinkrouter.local (opens in a new tab)http://192.168.0.1 (opens in a new tab)	No username required	password	Wi-Fi 6 (802.11ax) AX1800 dual-band mesh-capable router (EXO AX line) — a lower tier than the AX5400 DIR-X5460. Web or D-Link Wi-Fi app setup. D-Link's Quick Install Guide states a static default: "You will be asked for your Device/Admin Password. By default this password is 'password'." Manufacturer (opens in a new tab) Recovery & reset instructions Use a paperclip to press and hold the recessed Reset button for longer than 10 seconds to restore default settings, then reconnect to the Wi-Fi on the Quick Installation Card and set up again.
D-LinkDIR-X3260 (EXO AX3200)Router · Web	http://dlinkrouter.local (opens in a new tab)http://192.168.0.1 (opens in a new tab)	No username required	password	AX3200 dual-band mesh-capable Wi-Fi 6 EXO-series router with Gigabit WAN — a lower-tier sibling of the DIR-X4860. The first web login prompts only for a Device/Admin Password with the factory value "password" (no username). D-Link: "You will be asked for your Device/Admin Password. By default this password is 'password'." Manufacturer (opens in a new tab) Recovery & reset instructions Power the router on, then use a paperclip to hold the recessed rear Reset button ~10 seconds and release to restore factory defaults; the Device/Admin password reverts to "password".
D-LinkDIR-X4860 (EXO AX4800)Router · Web	http://dlinkrouter.local (opens in a new tab)http://192.168.0.1 (opens in a new tab)	No username required	password	AX4800 dual-band mesh-capable Wi-Fi 6 (802.11ax) EXO-series router with Gigabit WAN (Ethernet). Genuine static default: the first web login asks only for a Device/Admin Password whose factory value is the word "password" (no username field). D-Link: "You will be asked for your Device/Admin Password. By default this password is 'password'." Manufacturer (opens in a new tab) Recovery & reset instructions With the router powered on, use a paperclip to hold the recessed rear Reset button ~10 seconds, then release to restore factory defaults (the Device/Admin password returns to "password").
D-LinkDIR-X5460 (EXO AX5400)Router · Web	http://dlinkrouter.local (opens in a new tab)http://192.168.0.1 (opens in a new tab)	No username required	password	Wi-Fi 6 (802.11ax) AX5400 dual-band mesh-capable router with a dual-core CPU and detachable antennas. D-Link's Quick Install Guide states a genuine static default: "You will be asked for your Device/Admin Password. By default this password is 'password'." Some revisions' user manuals instead cite a label-printed password, so confidence is medium. Manufacturer (opens in a new tab) Recovery & reset instructions Use a paperclip to press and hold the recessed Reset button on the back for longer than 10 seconds to restore the router to default settings.

Related login addresses

GET CONNECTED

How to reach your router

Connect your computer or phone to the router’s Wi-Fi or an Ethernet port.
Open a documented login address. If it does not load, look for the Router or Default gateway address in your device’s network settings.
Match your model and hardware revision to the table. Use the device label or your setup password when the model has no shared default.

Admin password or Wi-Fi password?

The admin password opens the router’s settings. The Wi-Fi password connects a device to the wireless network. They may be different, and an ISP or cloud account can be separate again.

If the password does not work

Check capitalization and the device label, then use the manufacturer’s password-recovery instructions. A factory reset erases settings and may require ISP setup details; follow the instructions for your exact model.

Find your model’s manual →

Sources & data

Router default-credential data from ssid.ai (Drumworks Ventures FZ), licensed CC BY 4.0. Adapted, organized and supplemented by Manuals+. The data is provided as is; manufacturers and ISPs can change defaults.

Additional factual entries: Austin Songer’s credential list and Clint Milner’s credential list. Each table entry links to its supporting source. Updated 2026-10-16.