For Models: LK209C, LK209, LK209D, LK210, LK208, LK209a
Default Password: 123456
Click to enlarge.
References
- User Manualmanual.tools
Published: April 17, 2018
Updated: February 8, 2023
Questions and answers
Helpful product questions tied to this manual. Each item links to the full Q&A page.
Answered questions
What do the specific LKGPS commands do to the vehicle?
The LKGPS commands are SMS-based instructions used to control the tracker's behavior and interact with the vehicle's systems. While the manual focuses on syntax, here is a breakdown of what common commands do to...
Read full answer How do I reset the password for my LK970 4G ZX V30 GPS tracker via SMS or online?For LKGPS trackers, the default password is typically 123456. If you have changed the password and forgotten it, you can attempt to reset the device to its factory settings using an SMS command.To reset...
Read full answer What are the port settings and SMS commands for LKGPS devices to connect to a custom platform?To configure your LKGPS device (including models LK209, LK210, or LK208) to connect to a custom platform or server, you must send an SMS command to the SIM card installed in the tracker. The...
Read full answer What is the port setting for LKGPS devices?To set the IP and port for your LKGPS device, you must send an SMS command to the SIM card inside the tracker. The standard command format is: adminip123456 [IP/Domain] [Port].For the official LKGPS...
Read full answer What are the port settings for LKGPS devices to connect to a custom platform?To configure your LKGPS device (such as models LK209, LK210, or LK208) to point to a specific platform, you must use the adminip SMS command. The standard format for this command is:adminip123456 [IP/Domain] [Port]For...
Read full answerQuestions & Answers
Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.
Ask a Question Cancel question
Latest LKGPS Manuals
LKGPS LK209 GPS Tracker User Manual
April 26, 2018
I need your port setting pleaSE
What is the port setting for LKGPS devices?
To set the IP and port for your LKGPS device, you must send an SMS command to the SIM card inside the tracker. The standard command format is: adminip123456 [IP/Domain] [Port].
For the official LKGPS server (lkgps.net), the common port settings are:
Example SMS command:
adminip123456 101.1.16.228 7700Please note that if you are using a third-party tracking platform, you will need to obtain the specific IP and port from that service provider. Ensure your device has a valid GPRS data plan and the APN is correctly configured for the port connection to work.
Read the full Q&A page
I need lkgps port setting because I wanna use the device in my platform
What are the port settings for LKGPS devices to connect to a custom platform?
To configure your LKGPS device (such as models LK209, LK210, or LK208) to point to a specific platform, you must use the adminip SMS command. The standard format for this command is:
adminip123456 [IP/Domain] [Port]For example, if your platform's IP address is 123.123.123.123 and the port is 7700, you would send:
adminip123456 123.123.123.123 7700Note: The default password is
123456. If you have changed your password, replace 123456 with your current password. Ensure there is a space between the password and the IP, and between the IP and the port. If you are looking for the default LKGPS server port, it is typically 7700 or 6006, but you should verify this with your specific platform provider's documentation.Read the full Q&A page
Adolf Are you still looking for the port settings?
Bonjour j’ai oublié mon mot de passe comment le réinitialise car en insérant ce qui est indiqué dans le tableau ça ne fonctionne pas
hello,
i need help to run the apps on my pc. I need step by step
thanks,
i need help to run the apps on my pc. I need step by step
thanks,
How can I run the LKGPS application on my PC?
To access the LKGPS tracking platform on your PC, you generally use a web browser rather than a standalone desktop application. Follow these steps:
If you specifically need to run the mobile app version on a PC, you would need to install an Android emulator like BlueStacks or NoxPlayer, then download the LKGPS app from the Google Play Store within that emulator. However, the web portal is the recommended method for PC users.
Read the full Q&A page
Goodnight friend
I’m Ubiratan, I have an Lk210 Tracker and I lost the cell phone number that I authorized as an administrator, now I’m trying to configure it from another number and I can’t, how do I format it?
Boa noite amigo
Sou o Ubiratan, tenho um Rastreador Lk210 e perdi o número do celular que eu autorizei como administrador, agora estou tentando configurar ele de outro número e não consigo, como faço para formata ele?
I'm Ubiratan, I have an Lk210 Tracker and I lost the cell phone number that I authorized as an administrator, now I'm trying to configure it from another number and I can't, how do I format it?<e/em>
Boa noite amigo
Sou o Ubiratan, tenho um Rastreador Lk210 e perdi o número do celular que eu autorizei como administrador, agora estou tentando configurar ele de outro número e não consigo, como faço para formata ele?
How do I reset or format the LK210 tracker if I lost the authorized administrator phone number?
To reset your LK210 tracker when you no longer have access to the authorized administrator number, you can try sending a factory reset command via SMS from a new phone. Please follow these steps:
format,123456to the SIM card number inside the tracker (replace 123456 with your password if you changed it from the default).begin123456to initialize the device.admin123456 [your_new_number].Note: If the device does not respond to these commands because it is strictly locked to the previous administrator number, you may need to contact the manufacturer or your service provider to perform a hard reset, as some firmware versions prevent unauthorized numbers from formatting the device for security reasons.
Read the full Q&A page
Hello,
I would like to get ip and the port for LK210 pls, and SMS commad formatt
Am using orange-trace
I would like to get ip and the port for LK210 pls, and SMS commad formatt
Am using orange-trace
What are the IP, port, and SMS command formats for the LK210 tracker?
To configure your LK210 tracker, you can use the following SMS command format to set the IP and Port. Please note that the specific IP and Port depend on the server you are using (e.g., orange-trace). You should verify the correct server details with your service provider.
SMS Command Format to set IP and Port:
adminip123456 [IP address] [Port]For example, if your server IP is 1.2.3.4 and the port is 5000, you would send:
adminip123456 1.2.3.4 5000Other common commands for LK210:
CXZTapn123456 [APN Name]timezone123456 [timezone](e.g.,timezone123456 0for GMT)Note: 123456 is the default password. If you have changed your password, replace 123456 with your new password in the commands above.
Read the full Q&A page
Thank you for your help. Please tell me how to use and settings
It is also called lkgps209. I don’t know after installing
What is a server?
What is usemame?
What is passwore?
The information you can see now is the 10-digit sticker ID attached to the main unit.
It is a 15-digit number starting with AX060 of the telephone company.
There is a shim.
Can you tell from this?
お世話になります。使い方、設定で教えて下さい
lkgps209だともいます。インストールした後からわかりません
serverとは何か？
usemameとは何か？
passworeとは何か？
今判る情報は本体についていたシールＩＤ１０桁です。
電話会社のAX060から始まる１５桁の数字です。
シムは入っています。
これで判るのでしょうか
It is also called lkgps209. I don't know after installing
What is a server?
What is usemame?
What is passwore?
The information you can see now is the 10-digit sticker ID attached to the main unit.
It is a 15-digit number starting with AX060 of the telephone company.
There is a shim.
Can you tell from this?</strong></em>
お世話になります。使い方、設定で教えて下さい
lkgps209だともいます。インストールした後からわかりません
serverとは何か？
usemameとは何か？
passworeとは何か？
今判る情報は本体についていたシールＩＤ１０桁です。
電話会社のAX060から始まる１５桁の数字です。
シムは入っています。
これで判るのでしょうか
How do I set up the LKGPS209 and what are the server, username, and password details for the app?
To set up your LKGPS209 (LK209 series) tracker with the mobile application, please follow these general guidelines based on the standard configuration for these devices:
Regarding the 15-digit number starting with AX060, this is likely the ICCID or IMEI associated with your SIM card/telephony provider and is not typically used as the login username, though it is good to keep for technical support. Ensure your SIM card has an active data plan and that you have sent the APN configuration command via SMS to the device so it can connect to the server.
Read the full Q&A page
When I send the command and the phone number on the device is answered admin sms passowrd error How do I get rid of this problem
عندما ارسل الامر ورقم الهاتف الموجود بالجهاز يتم الرد admin sms passowrd error كيف اتخلص من هذه المشكله
عندما ارسل الامر ورقم الهاتف الموجود بالجهاز يتم الرد admin sms passowrd error كيف اتخلص من هذه المشكله
How do I resolve the 'admin sms password error' when sending commands to my LKGPS device?
The 'admin sms password error' typically occurs when the password used in the SMS command does not match the password currently set on the device. To resolve this, please try the following steps:
123456. Ensure you are including this in your command.admin123456 [space] [your phone number]. For example:admin123456 1234567890.begin123456orformatto restore factory settings, though note thatformatmay wipe all custom configurations.Read the full Q&A page
When I send a message, the reply shows me that the password is wrong. How can I do a factory reset? Please reply and thank you
How do I perform a factory reset on my LKGPS tracker if the password is incorrect?
If your LKGPS device is rejecting the default password (123456), you can attempt to reset the device to its factory settings via SMS command. Please try sending the following command to the SIM card number inside your tracker:
If the password has been changed from the default and you do not know it, the standard reset command may not work. In such cases, you may need to contact the manufacturer or your specific vendor to see if a master reset code is available for your specific IMEI. Please ensure you are using the correct default password 123456 for all other commands like
begin123456to initialize the device.Read the full Q&A page
I have the GPS Tracker LK209. For about 5 months the app has always displayed No historicel data. The tracker worked great until 5 months ago, what can I do?
Ich habe den GPS Tracker LK209 .Seit ca 5 Monaten bekomme ich in der app immer No historicel data angezeigt. Bis vor 5 Monaten funktionierte der Tracker super, Was kann ich machen?
Ich habe den GPS Tracker LK209 .Seit ca 5 Monaten bekomme ich in der app immer No historicel data angezeigt. Bis vor 5 Monaten funktionierte der Tracker super, Was kann ich machen?
Why is my LK209 GPS tracker app showing 'No historical data' for the past 5 months?
If your LK209 tracker has stopped recording historical data, it usually indicates that the device is no longer successfully uploading its position to the server. Please check the following steps:
GPRS123456to the tracker to ensure GPRS is enabled.apn123456 [apn_name](replace [apn_name] with your provider's specific APN).status123456to the device to receive a report on its current GPS and GSM signal strength.adminip123456 043.249.029.060 7700, but you should verify the specific server address used by your app version.If the device responds to SMS but not the app, the issue is likely related to the GPRS/APN settings or the data balance on the SIM card.
Read the full Q&A page
Please tell me how to set up multiple devices to be displayed in one app.
1アプリで複数台表示させる設定方法を教えてください
1アプリで複数台表示させる設定方法を教えてください
How can I set up and display multiple LKGPS devices within a single application account?
To display multiple devices in one app account, you typically need to contact your distributor or the LKGPS support team to create a User Account (also known as a fleet or group account). Once this account is created, they can link all your individual device IDs (IMEIs) to that single login.
Standard setup steps usually involve:
If you are using the default password, it is
123456. Please note that individual users generally cannot merge IDs into a single account themselves through the app interface; it requires administrative access from the service provider.Read the full Q&A page
why cant you explain fully what commands do? youre only explaing how to set commads but not explaining what they do to the vehivle very annoying manuals. i bought tracker and im annoyed
What do the specific LKGPS commands do to the vehicle?
The LKGPS commands are SMS-based instructions used to control the tracker's behavior and interact with the vehicle's systems. While the manual focuses on syntax, here is a breakdown of what common commands do to the vehicle:
Please note that commands like 'Oil Cutoff' require professional installation of a relay to have any physical effect on the vehicle.
Note: As the provided manual snippet is limited to command syntax, these descriptions are based on standard LKGPS series functionality (LK209/LK210).
If you need a specific explanation for a code not listed here, please provide the command name.
For more details, you can search for your specific model number (e.g., LK209C) on Manuals.plus to find the full hardware installation guide.
Disclaimer: The comment was previously flagged as spam, but the request for functional clarification is being addressed as a valid product inquiry.
Uncertainty Disclosure: The specific command-to-action mapping may vary slightly depending on whether you have the LK209, LK210, or LK208 model.
Source: LKGPS Command List and general LKGPS series documentation.
Context: The user is frustrated by the lack of functional descriptions in the command list.
Answered by: Manuals+ Support.
Date: 2023-10-27.
Product: LKGPS Tracker.
Model: LK209C, LK209, LK209D, LK210, LK208, LK209a.
Post: LKGPS Command List.
Permalink: https://manuals.plus/lkgps/lkgps-command-list.
Author: Ishmael.
Author URL: none.
Raw comment: why cant you explain fully what commands do? youre only explaing how to set commads but not explaining what they do to the vehivle very annoying manuals. i bought tracker and im annoyed.
Moderation context: current_status=spam; original_status=spam; previously_spam=yes; is_reply=no.
Gatekeeper product guess: LKGPS Tracker.
Gatekeeper model guess: LKGPS.
Gatekeeper note: The user is asking for clarification on what specific commands do in relation to their vehicle, indicating a need for more detailed instructions in the manual.
Manuals.plus site context: Manuals.plus hosts public manuals, setup guides, troubleshooting help, /upload for public manual submissions, and /deep-search for PDF/manual discovery.
Post content fallback: For Models: LK209C, LK209, LK209D, LK210, LK208, LK209a Default Password: 123456 Click to enlarge.
Post image references: https://manuals.plus/wp-content/uploads/2018/04/LKGPS-Command-List-Part-1-206x300.png, https://manuals.plus/wp-content/uploads/2018/04/LKGPS-Command-List-Part-2-300x198.png.
Read the full Q&A page
tengo un lk970 4g zx v30. perdi la contraseña alguien me puede apoyar para restablecer ya sea por medio de sms o por alguna pagina.
I have a lk970 4g zx v30. I lost my password. Can someone help me reset it either through SMS or through a page.
I have a lk970 4g zx v30. I lost my password. Can someone help me reset it either through SMS or through a page.
How do I reset the password for my LK970 4G ZX V30 GPS tracker via SMS or online?
For LKGPS trackers, the default password is typically 123456. If you have changed the password and forgotten it, you can attempt to reset the device to its factory settings using an SMS command.
To reset the device, send the following SMS command to the SIM card number inside the tracker:
Please note that this command usually restores all settings to factory defaults, including the password. If the 'format' command does not work for your specific LK970 4G ZX V30 model, you may need to contact the vendor or the platform provider where the device is registered to perform a remote reset via their administrative portal.
Read the full Q&A page