RFRCOV12K RF Remote Controller
Product Information
Specifications
- Model: XYZ-2000
- Dimensions: 10 x 5 x 3 inches
- Weight: 2 pounds
- Power: 120V, 60Hz
- Capacity: 1.5 liters
- Material: Stainless steel
Product Usage Instructions
Setup
- Unpack the product and remove all packaging materials.
- Place the product on a flat, stable surface near a power
outlet. - Ensure the power switch is in the “Off” position before
plugging in. - Plug the power cord into a suitable electrical outlet.
Operation
- Fill the kettle with water up to the maximum capacity level
indicated. - Close the lid securely.
- Turn on the power switch to start the heating process.
- The kettle will automatically turn off once the water reaches
boiling point.
Cleaning and Maintenance
- Unplug the kettle and allow it to cool before cleaning.
- Use a damp cloth to wipe the exterior of the kettle.
- For descaling, mix equal parts of water and vinegar, boil, and
rinse thoroughly. - Regularly clean the filter to ensure optimal performance.
FAQ
Q: How often should I descale the kettle?
A: It is recommended to descale the kettle every 2-3 months,
depending on usage frequency and water hardness in your area.
Q: Can I use the kettle without water?
A: No, never operate the kettle without water as it may damage
the heating element and pose a safety risk.
FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Documents / Resources
 |
LIRIS RFRCOV12K RF Remote Controller [pdf] Instruction Manual 2BFDG-RFRCOV12K, 2BFDGRFRCOV12K, RFRCOV12K RF Remote Controller, RFRCOV12K, RF Remote Controller, Remote Controller, Controller |