LIRIS RFRCOV12K RF Kidhibiti cha Mbali

Vipimo

• Mfano: XYZ-2000
• Vipimo: Inchi 10 x 5 x 3
• Uzito: Pauni 2
• Nguvu: 120V, 60Hz
• Uwezo: 1.5 lita
• Nyenzo: Chuma cha pua

Utangulizi wa Kidhibiti cha Mbali

• The remote control can control both networked and non-networked lights. When the light is not networked & networked, you need to turn off the power of the device for 5 seconds, then turn on the power of the light again and press the on/off button, the light appears to breathe or blink to complete the pairing.lf the pairing is not successful, please repeat the steps.
• Scenes Pause/PIay
• Mwangaza+ na Kasi ya Onyesho+
• Mwangaza- & Kasi ya Onyesho-
• Onyesho Lililotangulia
• Onyesho Linalofuata
• Mzunguko wa Maonyesho ya Kiotomatiki
• Nyekundu
• Kijani
• Bluu
• Nyeupe yenye joto
• Nyeupe baridi

Maagizo ya Mkutano

Step 1: Unpack the Remote

• Remove the remote controller and any included accessories from the packaging.
• Verify that the package contains: remote controller, battery, user manual, and mounting accessories (if included).

Hatua ya 2: Ingiza Betri

• Fungua sehemu ya betri nyuma ya kidhibiti cha mbali.
• Insert the required batteries (check polarity + / – as indicated).
• Funga sehemu ya betri kwa usalama.

Kidokezo: Tumia betri mpya kwa utendakazi bora.

Hatua ya 3: Kuoanisha na Vifaa

• Turn on the RF-enabled device you want to control.
• Follow the manufacturer’s pairing instructions: usually involves pressing a pair button on the device and then pressing a corresponding button on the remote.
• The device should respond (e.g., light turns on/off) to confirm successful pairing.

Step 4: Testing Buttons

• Test each button to ensure it performs the desired function (on/off, dim, scene change).
• If a button does not respond, check battery installation and ensure the device is within range.

Step 5: Mounting / Placement

• If wall-mountable, use the included screws or adhesive pad to fix the remote near the controlled devices.
• Ensure the remote is placed within the operating range of the RF devices.

Maagizo ya Matumizi ya Bidhaa

Sanidi

1. Fungua bidhaa na uondoe vifaa vyote vya ufungaji.
2. Weka bidhaa kwenye uso wa gorofa, imara karibu na kituo cha nguvu.
3. Hakikisha swichi ya umeme iko katika nafasi ya "Zima" kabla ya kuchomeka.
4. Chomeka kebo ya umeme kwenye sehemu inayofaa ya umeme.

Uendeshaji

1. Jaza kettle na maji hadi kiwango cha juu cha uwezo kilichoonyeshwa.
2. Funga kifuniko kwa usalama.
3. Washa swichi ya umeme ili kuanza mchakato wa kuongeza joto.
4. Kettle itazima moja kwa moja mara tu maji yanapofikia kiwango cha kuchemsha.

Kusafisha na Matengenezo

• Ondoa kettle na uiruhusu baridi kabla ya kusafisha.
• Tumia tangazoamp kitambaa kuifuta nje ya kettle.
• For descaling, mix equal parts of water and vinegar, boil, and rinse thoroughly.
• Safisha kichujio mara kwa mara ili kuhakikisha utendakazi bora.

TAARIFA YA FCC

Kifaa hiki kinatii sehemu ya 15 ya Sheria za FCC. Operesheni inategemea masharti mawili yafuatayo:

1. Kifaa hiki hakiwezi kusababisha usumbufu unaodhuru, na
2. Kifaa hiki lazima kikubali uingiliaji wowote uliopokewa, ikiwa ni pamoja na uingiliaji ambao unaweza kusababisha uendeshaji usiohitajika.

Mabadiliko yoyote au marekebisho ambayo hayajaidhinishwa waziwazi na mhusika anayehusika na utiifu yanaweza kubatilisha mamlaka ya mtumiaji kuendesha kifaa.

• KUMBUKA: Kifaa hiki kimejaribiwa na kupatikana kuwa kinatii vikomo vya kifaa cha kidijitali cha Hatari B, kwa mujibu wa Sehemu ya 15 ya Sheria za FCC.

Vikomo hivi vimeundwa ili kutoa ulinzi unaofaa dhidi ya kuingiliwa kwa hatari katika usakinishaji wa makazi. Kifaa hiki huzalisha, kutumia na kuangazia nishati ya masafa ya redio na, ikiwa hakijasakinishwa na kutumiwa kwa mujibu wa maagizo, kinaweza kusababisha mwingiliano unaodhuru kwa mawasiliano ya redio. Hata hivyo, hakuna uhakika kwamba kuingiliwa haitatokea katika ufungaji fulani. Ikiwa kifaa hiki kitasababisha usumbufu unaodhuru kwa upokeaji wa redio au televisheni, ambao unaweza kubainishwa kwa kuzima na kuwasha kifaa, mtumiaji anahimizwa kujaribu kusahihisha uingiliaji huo kwa moja au zaidi ya hatua zifuatazo:

• Elekeza upya au uhamishe tena antena inayopokea.
• Kuongeza utengano kati ya kifaa na mpokeaji.
• Unganisha vifaa kwenye plagi kwenye mzunguko tofauti na ile ambayo mpokeaji ameunganishwa.
• Wasiliana na muuzaji au mtaalamu wa redio/TV kwa usaidizi.

Kifaa kimetathminiwa ili kukidhi mahitaji ya jumla ya kukaribiana na RF. Kifaa kinaweza kutumika katika hali ya mfiduo unaobebeka bila kizuizi.

• Shenzhen Liris Lighting Co., Ltd.
• www.liris-lighting.com
• Simu: +86-75528094270
• Barua pepe: inquiry@liris-lighting.com
• Add: Building B, Jinxiang Industrial Park, Guancheng Community, Guanhu Street, Longhua District, Shenzhen, China, 518110

Maswali Yanayoulizwa Mara kwa Mara

Ni mara ngapi ninapaswa kupunguza kettle?

It is recommended to descale the kettle every 2-3 months, depending on usage frequency and water hardness in your area.

Je, ninaweza kutumia kettle bila maji?

Hapana, usiwahi kutumia kettle bila maji kwani inaweza kuharibu kifaa cha kupokanzwa na kusababisha hatari ya usalama.

Nyaraka / Rasilimali

LIRIS RFRCOV12K RF Kidhibiti cha Mbali [pdf] Mwongozo wa Maelekezo 2BFDG-RFRCOV12K, 2BFDGRFRCOV12K, RFRCOV12K RF Kidhibiti cha Mbali, RFRCOV12K, Kidhibiti cha Mbali cha RF, Kidhibiti cha Mbali, Kidhibiti

Marejeleo

• Mwongozo wa Mtumiaji