LINKBAR Single Touch Coffee Instructions

ENHANCIN POWE G THE
– EXPERIENC
HE COFFE
REDEFINED

SIN GLE TOUCH COFFEE

THANK YOU FOR YOUR PURCHASE
This product is designed for general use and may not be stitable for individuals with specific needs or disabilities. For children’s safety adult supervision is required at all times

FINE AND PERSISTENT CREMA

THE ESPRESSO DELIVERS A SMOOTHER CLEANER AND MORE NUANCED FLAVOR PROFILE
UNIQUE ESPRESSO TEXTURE COMPRESSION TECHNOLOGY EFFICIENT AND STABLE

SAFETY INSTRUCTIONS

1. Remove all packaging materials before use.
2. The drain hose must be securely connected to a drain outlet, The machine will discharge a small amount of hot water during operation
   Avoid directing the drain outlet towards areas where people may be present to prevent scalding.
3. Ensure that the power cord, water supply tube, and drain hose are connected correctly and securely.
4. Do not touch the coffee and water outlets directly with your hands to avoid burns, Use a clean cloth to wipe it
5. If the machine malfunctions, please contact after-sales service for repair immediately. Unauthorized repairs may damage the pipes and cause the liquid topoi during the production process.

SPECIFICATIONS

DIMENSION (L*W*H)
Tap: 137*116*250mm Host: 500*320*147mm
TYPES 4 Types
VOLTAGE 220V 16A
POWER 1900W
WEIGHT Tap: 1.2kg (Net Weight)
Host: 12.9kg (Net Weight)
OUTPUT 300 cups/h(30ml/cup)
THINGS TO KNOW
BEFORE INSTALLATION
Notice: Wrong plumbing can cause malfunction on the machine.
The equipment must be installed with adequate backfiow protection to comply with all applicable federal, state, and local codes.

COMPONENTS

BUCKET INSTALLATION DIAGRAM

Unit: mm

1. Faucet
2. Fount C/T (Black Silicone Hose)
3. Fount Inlet (With Transparent Tube)
4. Faucet Data Cable
5. Cleaning Water Pipe (White Silicone Tube)
6. Milk Jug
7. C/T Inlet (Black Silicone Hose)
8. Bucket
9. Water Inlet (With Transparent Tube)
10. Pressure reducing valve (installation required for water pressure above 4bar)
11. Water Purifier
12. Y-valve
13. Machine Power Cord (220v 16a Three-prong Socket)

REFRIGERATOR INSTALLATION DIAGRAM

Unit: mm

1. Faucet
2. Pitcher Rack& Water Tray
3. Countertop Hole (See Upper Right)
4. Faucet Data Cable
5. Main Unit
6. Fount C/T (Black Silicone Hose)
7. Fount Inlet (With Transparent Tube)
8. Drain tube for filter tray
9. C/T Inlet (Black Silicone Hose)
10. Cleaning Water Pipe (White Silicone Tube)
11. Milk Jug
12. Refrigerator
13. Machine Power Cord (220v 16a Three-prong Socket)
14. Refrigerator Power Cord (220v, 10a 5 Hole Socket)
15. Water Inlet (With Transparent Tube)
16. Pressure reducing valve (Installation Required For Water Pressure Above 4bar)
17. Water Purifier
18. Y-valve

1. Faucet
2. Fount C/T (Black Silicone Hose)
3. Fount Inlet (With Transparent Tube)
4. Faucet Data Cable
5. Cleaning Water Pipe (White Silicone Tube)
6. C/T Inlet (Black Silicone Hose)
7. Water Inlet (With Transparent Tube)
8. Machine Power Cord (220v 16a Three-prong Socket)
9. Milk Jug
10. Refrigerator
11. Refrigerator Power Cord (220v, 10a 5 Hole Socket)
12. Pressure reducing valve (Installation Required For Water Pressure Above 4bar)
13. Water Purifier
14. Y-valve

PARAMETER ADJUSTMENT

SCREEN DISPLAY CONTENT

Power on
Before you start, make sure all the cords and tubes are plugged in tight. Find the power button on the left side of the machine and press it. Youlll see our logo pop up:

When you see the following main screen, you can start using it,

Control Panel Of The Countertop Faucet
To maximize production efficiency, the faucet icon’s settings are preset and cannot be changed manually. To adjust parameters, please navigate to the main unit interface below:

FUNCTION

MAIN INTERFACE – SETTINGS INTERFACE
Tap “Settings” to enter the settings interface.

CLEANING
Use for the daiy cleaning and blockage cleaning (Settings – Cleaning)
LANGUAGE
Two language options: Chinese, English.
(Settings – Language)
ADV SETTINGS
Editthe parameters of brightness, pump speed.
(Settings – ADV settings )
SEAMLESS SWITCHING
Retunes the liquid inside the suction tube back in to the container (Settings – Seamless
Switching)
TIME
Use to corfigure the time displayed on the main screen.
(Settings – Time)
FACTORY RESET
Restore al settings to factory defaults.
( Settings – Factory Reset)
SOFTWARE
Supports future system upgrades.
(Settings – Software)
USAGE RECORD
An engineer’s tool for monitoring machine performance, including testing electronic valves.
(Settings – Usage Record)
OPERATION PROCEDURE
All operations can be adjusted by (tapping), (long-pressing), or (swiping) on the display screen.
ONE-TOUCH OUTPUT
Simply tap the corresponding 1234 icons to initiate the output process according to the preset settings. The process can be manually halted by tapping the icon again.

ADJUSTING OUTPUT PARAMETERS
Press and hold the corresponding 1234 icons to access the output parameter adjustment screen, Once the desired parameter values have been adjusted, tap &) to proceed to the parameter confirmation screen

1. ESPRESSO: Program the extraction time for the espresso based on the selected cup size/volume.
2. ESPRESSO TEMPERATURE: Adjust the temperature of the espresso.
3. CREMA: Adjust the ratio of the crema.
4. WATER VOLUME: Adjust the volume of hot water.
5. WATER TEMPERATURE: Adjust the temperature of hot water,
   Tap to deselect and return to the previous screen. Tap © to corfirm the parameter changes, which will overwrite the original values and create a new setting

CUSTOMIZED CLEANING

1. Main Screen – Settings – Cleaning
   Tap “Cleaning ” to enter the cleaning mode selection page.
2. Cleaning Mode Selection Page
   TapEto enter the password inputinterface,
3. Passcode Input Interface
   Enter the passcode displayed on the machine. For example, i the time displayed is 1347, input 1347 in the passcode field, Tep © to confim.
4. Cleaning Settings Interface Tap “Cleaning Parameters” to enter the cleaning parameter adjustment interface,
5. Cleaning Parameter Adjustment Interface Cleaning parameters that are commonly adjusted, typically setto factory defaults.(1) DRAINAGE TIME: Time to drain the liquid from the internal pipeline before cleaning
   (2) CLEANING TIME: The time for each intake of diluted cleaning solution,
   3) REST TIME: The dwell time of the diluted cleaning solution inside the machine during the cleaning process.
   4) CLEANING SPEED: Flow rate of dieted leaning solution during dleaning process.
   (8 CLEAN CYCLES: Total number of cleaning cycles.
6. Parameters Confirmation Interface
   To cancel your selection and retune to the previous screen, tap  . To confirm the parameters, tap ©

ADV SETTINGS

1. Main Interface – Settings
   Tap “Settings” to enter the function selection interface.
2. Settings – ADV settings
   Tap” ADV settings ” to enter the password screen.
3. Enter Passcode
   Use the current time as your passcode. For example, f the time is 13:47,enter 1347 Tap © to continue.
4. ADV Settings
   Edit the paremeters of brighthess, pump speed etc.PUMP SPEED: Adjustable concentrate extraction speed.
   SEAMLESS SWITCHING: Adjust the liquid return duration.
   BRIGHTNESS: The screen brightness can be adjusted to adapt to different ambient light conditions.

SEAMLESS SWITCHING

This function purges residual concentrate from the tubing back into the container to prevent waste and allow for future reuse.

1. Home Screen – Settings
   Tap “Settings’ on the Home Screen
2. Function Settings – Seamless Switching
   Tap “Seamless Switching'” The machine will automatically retumn the liquid inside the suction tube back into the container.
3. Seamless Switching Interface
   The machine is automatically returning the liquid from the suction tube into the container. Please wait for the process to finish,
4. Function Settings Interface
   Once theliquid has been fully dleared, the system will automatically retum to the Settings page.

CLEANING

The machine requires daily cleaning before the end of each workday. Failure to do so willresult in an automatic cleaning cycle after 24 hours,
Please use dry, soft towel to wipe the coffee inlet tube, coffee inlet tube tip and fount outlet,

DAILY CLEANING

1. Go to “Settings – Cleaning – Daily Cleaning” on the main page.
2. Wait for the liquid in the liquid tube back to the container, then proceed to the next step.
3. Using a clean empty Tlter-volume container, place one piece of Linkbar multi-use cleaning tablet into the container, and insert the liquid tube and cleaning tube. Press Next to begin cleaning
4. The machine will automatically perform cyclic cleaning; wait tillt ends.
5. Cleaning completed. Switch off the power.

BLOCKAGE CLEANING
If a significant decrease in dispensing volume is observed, it may indicate a blockage in the interal tubing, Immediate blockage cleaning s required,

1. 0n the main interface, tap “Settings – Blockage Cleaning.
2. Place the liquid irlet tube into a container of clean water, then unscrew the nozzle filter (the dispensing outlet on the left side of the screen). Tap & when finished
3. You need to manually tap the ® icon to start the machine clearing
4. The machine is cleaning for 20 seconds. Please waitfor cleaning tocomplete,
5. When the timer reaches 00:00, the cleaning is complete: Tap the @ to finish and continue:
6. Tap”Finish and Retum” to complete this operation.

Anhui Linkbarcafe Electric Appliance Technology Co,, Ltd
E-Mail. admin@linkbar.tech
Tel. +86 138 1768 6423
Room 3001, Building 1, No. 823, Longhekou Road,
Nangang Science and Technology Park, High-tech Zone,
Shushan District, Hefei City, Anhui Province, China
http://LINKBAR.TECH