LightpathLED Vertical And Horizontal Stand

Product Specifications

• Product Name: Vertical & Horizontal Stand
• Compatibility: Fits most standard devices
• Material: Durable plastic
• Color: Black
• Dimensions: 5″ x 3″ x 2″

Accessories lists

INSTALLATION INSTRUCTION

Step 1: Install The Universal Wheel

• a) Press The Anti-Rotation Lock Of The Universal Wheel.
• b) Install The 4 Wheels On The Base.
• c) Turn Over The Base To Normal.

Step 2: Install The Lower Round Tubes

• a) Insert The Lower Round Tube Into The Base Hole.
• b) Then Lock The M8*25mm Inner Hexagonal Screws On The Bottom And Middle Of The Round Tube.
• Step 3: Install The Plastic Cover
  • a) Buckle The Special- Plastic Cover On The Middle O The Round Tube.

Step 4: Install The Plastic Cover

• a) First press the positioning pin on the telescopic tube into the lower round tube, adjust the height.

• b) And then lock it with M8* 25mm hexagon socket screws

Step 5: Install The Rectangular Baffle

4.6A Horizontal Stand Installation:

Step 6A: Install The Long Straight Brackets

a) Use M8*40mm Hexagon Socket Screws To Lock The Two Long Straight Brackets On The Back Of The 2 Red Panels.

Step 7A: Install The L-Shaped Bars

Step 8A: Install Vertical Hooks

• a) Padlock The Vertical Hook To The L-Bracket.
• Step 9A: Install The Panel Lights On The Stand4.6B Vertical Stand Installation:
• Step 6B: Install The Vertical Hook
• Step 7B: Install The Long Straight Brackets
• Step 8B: Install The Short Straight Brackets

Step 9B Install Panel Lights

• a). Put Two Groups Of Panel Lights Up And Down.
• b). And Lock Them on the Vertical Rod With M8*40mm Hexagon Screws.
• c). Tighten The Safety Screw On The Long Straight Brackets.

Step 10:

• Press The “Leader” Key For The Leader Panel(1520W), and Press The “Follower” Key For The Other Panel(1140W).
• Insert The Daisy Chain Cable: First Insert One End Of the Daisy Chain Cable Into The Ac Output Port Of The Master(1520W), And The Other End Into The Ac Input Port Of The Follower(1140W)
• Insert The Rj14 Cable to the Leader/Follower Port To Connect The 2 Panels.

Note: Any Panel Can Be The Leader Panel.

FAQ

Frequently Asked Questions 

• Q: Can this stand hold tablets and smartphones?
  • A: Yes, this stand is designed to hold most standard tablets and smartphones.
• Q: Is the stand adjustable for different viewing angles?
  • A: Yes, you can adjust the angle of the stand for both vertical and horizontal positions.
• Q: What should I do if my device does not fit securely on thestand?
  • A: Ensure that your device is placed correctly on the stand and that it is within the size compatibility range. If stability remains an issue, contact customer support for assistance.

Documents / Resources

LightpathLED Vertical And Horizontal Stand [pdf] Installation Guide Vertical And Horizontal Stand, Horizontal Stand, Stand

References

• User Manual