E1-L Sensor LED Dimmer
“
Specifications:
- Model No.: E1-L
- Features:
- Input connect with a variety of induction sensor head
- Output connected directly to the low voltage LED strip
- Max 8A output current
- Max output power 384W@48V
- Multiple sensor options including PIR motion sensor, touch
sensor, door sensor, hand sweep sensor, and microwave motion
detector
- Technical Parameters:
- Input voltage: 12-48VDC
- Input current: 8.1A
- Output voltage: 12-48VDC
- Output current: 8A
- Output power: 96W/192W/288W/384W (12V/24V/36V/48V)
- Output type: Constant voltage
- Safety and EMC:
- EMC standard: ETSI EN 301 489-1 V2.2.3
- Safety standard(LVD): ETSI EN 301 489-17 V3.2.4 EN
62368-1:2020+A11:2020 CE,EMC,LVD - Certification: CE
- Warranty: 5 years
- Environment:
- Operation temperature: -30°C ~ +55°C
- Case temperature (Max.): +85°C
- IP rating: IP20
- Package Size: L120 x W43 x H27mm
- Gross weight: 0.052kg
Product Usage Instructions:
Installation:
1. Connect the sensor input to the desired sensor head.
2. Connect the LED output to the low voltage LED strip.
Wiring Diagram:
Usage:
– PIR Motion Sensor: Light turns on when motion is detected and
turns off after 30 seconds of no motion.
– Touch Sensor: Short touch to turn on/off light, long touch to
dim up/down.
– Door Sensor: Light turns on gradually when door opens or no
obstacle ahead, turns off gradually when door closes or obstacle is
present.
– Hand Sweep Sensor: Light turns on gradually with hand sweep
and turns off gradually with another hand sweep.
– Microwave Motion Detector: Light turns on upon motion
detection and turns off after a set hold time with or without
dimming functions.
Frequently Asked Questions (FAQ):
Q: Can I use multiple sensor heads with this dimmer?
A: Yes, the dimmer supports input connection with a variety of
induction sensor heads.
Q: What is the warranty period for this product?
A: The product comes with a warranty of 5 years.
“`
Sensor LED Dimmer
Model No.: E1-L
Multiple Induction Head/1 ChannelConstantVoltage/8A output
Features
Input connect with a variety of induction sensor head, output connected directly to the low voltage LED strip. Max 8A output current, max output power 384W@48V. PIR motion sensor: when people or objects enter the sensitive eld, the light turn on;
when these exit the sensitive eld, the light turn off after 30 seconds. Touch sensor: short touch to turn on or turn off light; long touch to dimming up or down. Door sensor: when the door open, or no obstacle ahead, the light turn on gradually;
when the door close, or obstacle ahead, the light turn off gradually. Hand sweep sensor: when hand sweep, the light turn on gradually;
when hand sweep again, the light turn off gradually. Microwave motion detector: turn on the light upon detection of motion,
and turn off after a pre-selected hold time when there is no movement, without dimming, with dimming and two-step dimming function respectively.
Technical Parameters
Input and Output Input voltage Input current Output voltage Output current
Output power
Output type
12-48VDC 8.1A 12-48VDC 8A
96W/192W/288W/384W (12V/24V/36V/48V)
Constant voltage
Safety and EMC
EMC standard (EMC)
Safety standard(LVD) Certi cation Warranty Warranty
ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-17 V3.2.4 EN 62368-1:2020+A11:2020 CE,EMC,LVD
5 years
Environment Operation temperature Case temperature (Max.) IP rating
Package Size Gross weight
Ta: -30 OC ~ +55OC Tc: +85 OC IP20
L120x W43 x H27mm 0.052kg
Mechanical Structures and Installations
Sensor input
+ S
Installation rack
SENSOR INPUT
OUTPUT
INPUT 12-48VDC
LED output LED output + Power input + Power input –
Installation rack
33mm
97mm 18mm
Wiring Diagram
OUTPUT
ER (PIR Motion Sensor)
or othersensor
User Manual Ver 2.0.0
SENSOR INPUT
+ S
INPUT 12-48VDC
AC100-240V
Power Supply 12-48VDC Constant Voltage
1
Single color LED strip
+
Available sensor head
Model and Product name
Features
ER PIR Motion Sensor
When people or objects enter the sensitive eld, the light turn on; when these exit the sensitive eld, the light turn off after 30 seconds.
The medium can be wood,
glass or plastic.
EW Wood Touch Sensor
Short touch the sensing area to turn on or turn off light; long touch the
sensing area to dimming
up or down.
EC Touch Sensor
Short touch the LED to turn on or turn off light; long touch the LED to dimming up or down.
ED Door Sensor
When the door open, or no obstacle ahead, the light turn on gradually; when the door close, or obstacle ahead, the light turn off gradually.
ED(C) Door Sensor
When the door open, or no obstacle ahead, the light turn on gradually; when the door close, or obstacle ahead, the light turn off gradually.
EB Hand Sweep Sensor
When hand sweep, the light turn on gradually; when hand sweep again, the light turn off gradually.
EB( C) Hand Sweep Sensor
When the door open, or no obstacle ahead, the light turn on gradually; when the door close, or obstacle ahead, the light turn off gradually.
EM Microwave motion
Sensor
Turns on the light upon detection of motion, and turns off after a pre-selected hold time when there is no movement.
Sensor wire define
Wire length:1meter
+
S
User Manual Ver 2.0.0
Product pictrue
Size
33.5 mm 19.0 mm
16.0 mm
Sensor data
Sensitive eld: 3m Sensitivity angle: 120
33.5 mm 19.0 mm
10.0 mm
Dimming range: 0-100% PWM Frequency: 2KHz Detective distance: 5cm
33.5 mm 19.0 mm
14.0 mm
H4.5mm, 5mm
Dimming range: 0-100% PWM Frequency: 128Hz
33.5 mm
19.0 mm
12.5 mm
Detective distance: 10cm Detective angle: 15-30
32.3mm 10.5mm
31.5mm 33mm
13mm
Sensitive field: 8cm Sensitiveangle: 15-30
18mm
22.5mm 33.5 mm
19.0 mm 12.5 mm
Detective distance: 8cm Detective angle: 15-30
32.3mm 10.5mm
31.5mm 33mm
13mm
Sensitive field: 10cm Sensitiveangle: 15-30
18mm
22.5mm
67.0 mm
73.5 mm
EM
Microwave Induction Switch & Dimmer
10.525GHz
Set
Sensor Output
+ S
1meter
Press hold 5s Press hold 10s Press hold 15s
Switch
flash2times
Switch (2-step dimming) flash4times
Dimmer
flash6times
Light Sensing
22.0 mm
Detection zone: Max.(DxH) 20 x 15m Detection angle: 150°(wall installation), 360°(ceilling installation) Holdtime: 10s/30s/90s/3min 10min/20min/30min
42.5 mm
Power input + 5V level or PWM signal, high is ON, low is OFF Power input –
2
Induction sensor head installationand application
ER: PIR Motion Sensor Ceilling mounting pattern
Wall mounting pattern
ER
1. Out of sensing range (Light off )
120°
2.Sensing human activity (Light on)
3M
3.Light off when go away (Automatically turn off)
3M
3M
ER 1.5M
3M 120°
2M
As long as people are moving within the sensing range, the light will be on continuously
2M
When installing, please pay attention to choosing a proper position and angle, otherwise the sensing distance will be very close or the sensing will be insensitive
EW: Wood Touch Sensor
Paste the sensor under the wood board or glass pane.
EC: Touch Sensor
Drill holes to expose the LED, Paste the sensor under the glass pane or wood board.
EW
Short touch to turn on or turn off light; long touch to dimming up or down.
EC
Short touch the LED to turn on or turn off light; long touch the LED to dimming up or down.
ED / ED(C): Door Sensor
Installed on the side where the door opens first.
ED(C)
Shielding sensing (door control): Use the door as a reflection object. It is installed at the outer edge of the cabinet door, about 1cm away from the outer edge. In case of smooth reflective materials, please refer to the actual situation to decrease / increase reflection distance.
When the door open, or no obstacle ahead, the light turn on gradually; when the door close, or obstacle ahead, the light turn off gradually.
EB /EB(C): Hand Sweep Sensor
Make pendulum action at the front end of the sensor detector: when hand sweep, the light turn on gradually; when hand sweep again, the light turn off gradually.
5CM
EB(C)
>5CM
User Manual Ver 2.0.0
3
Documents / Resources
 |
LIGHTLAND E1-L Sensor LED Dimmer [pdf] Owner's Manual E1-L, E1-L Sensor LED Dimmer, E1-L, Sensor LED Dimmer, LED Dimmer, Dimmer |
