Owner's Manual for LIGHTLAND models including: E1-L, E1-L Sensor LED Dimmer, E1-L, Sensor LED Dimmer, LED Dimmer, Dimmer
Model No.: E1-L Sensor LED Dimmer Multiple Induction Head/1 Channel Constant Voltage/8A output Features Input connect with a variety of induction sensor head, output connected directly to the low voltage LED strip.
12 ago 2024 — a variety of induction sensor head. Input connect with. , output connected directly to the low voltage LED strip. ○ Max 8A output current, max output power ...
12 ago 2024 — User Manual Ver 2.0.1. Sensor. E1-L. Wiring Diagram. Mechanical Structures and Installations. Technical Parameters. 96W/192W/288W/384W. (12V/24V/36V/48V). 8.1A.
Sensor LED Dimmer Model No.: E1-L Multiple Induction Head/1 ChannelConstantVoltage/8A output Features Input connect with a variety of induction sensor head, output connected directly to the low voltage LED strip. Max 8A output current, max output power 384W@48V. PIR motion sensor: when people or objects enter the sensitive eld, the light turn on; when these exit the sensitive eld, the light turn off after 30 seconds. Touch sensor: short touch to turn on or turn off light; long touch to dimming up or down. Door sensor: when the door open, or no obstacle ahead, the light turn on gradually; when the door close, or obstacle ahead, the light turn off gradually. Hand sweep sensor: when hand sweep, the light turn on gradually; when hand sweep again, the light turn off gradually. Microwave motion detector: turn on the light upon detection of motion, and turn off after a pre-selected hold time when there is no movement, without dimming, with dimming and two-step dimming function respectively. Technical Parameters Input and Output Input voltage Input current Output voltage Output current Output power Output type 12-48VDC 8.1A 12-48VDC 8A 96W/192W/288W/384W (12V/24V/36V/48V) Constant voltage Safety and EMC EMC standard (EMC) Safety standard(LVD) Certi cation Warranty Warranty ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-17 V3.2.4 EN 62368-1:2020+A11:2020 CE,EMC,LVD 5 years Environment Operation temperature Case temperature (Max.) IP rating Package Size Gross weight Ta: -30 OC ~ +55OC Tc: +85 OC IP20 L120x W43 x H27mm 0.052kg Mechanical Structures and Installations Sensor input + S Installation rack SENSOR INPUT OUTPUT INPUT 12-48VDC LED output LED output + Power input + Power input - Installation rack 33mm 97mm 18mm Wiring Diagram OUTPUT ER (PIR Motion Sensor) or othersensor User Manual Ver 2.0.0 SENSOR INPUT + S INPUT 12-48VDC AC100-240V Power Supply 12-48VDC Constant Voltage 1 Single color LED strip + Available sensor head Model and Product name Features ER PIR Motion Sensor When people or objects enter the sensitive eld, the light turn on; when these exit the sensitive eld, the light turn off after 30 seconds. The medium can be wood, glass or plastic. EW Wood Touch Sensor Short touch the sensing area to turn on or turn off light; long touch the sensing area to dimming up or down. EC Touch Sensor Short touch the LED to turn on or turn off light; long touch the LED to dimming up or down. ED Door Sensor When the door open, or no obstacle ahead, the light turn on gradually; when the door close, or obstacle ahead, the light turn off gradually. ED(C) Door Sensor When the door open, or no obstacle ahead, the light turn on gradually; when the door close, or obstacle ahead, the light turn off gradually. EB Hand Sweep Sensor When hand sweep, the light turn on gradually; when hand sweep again, the light turn off gradually. EB( C) Hand Sweep Sensor When the door open, or no obstacle ahead, the light turn on gradually; when the door close, or obstacle ahead, the light turn off gradually. EM Microwave motion Sensor Turns on the light upon detection of motion, and turns off after a pre-selected hold time when there is no movement. Sensor wire define Wire length:1meter + S User Manual Ver 2.0.0 Product pictrue Size 33.5 mm 19.0 mm 16.0 mm Sensor data Sensitive eld: 3m Sensitivity angle: 120 33.5 mm 19.0 mm 10.0 mm Dimming range: 0-100% PWM Frequency: 2KHz Detective distance: 5cm 33.5 mm 19.0 mm 14.0 mm H4.5mm, 5mm Dimming range: 0-100% PWM Frequency: 128Hz 33.5 mm 19.0 mm 12.5 mm Detective distance: 10cm Detective angle: 15-30 32.3mm 10.5mm 31.5mm 33mm 13mm Sensitive field: 8cm Sensitiveangle: 15-30 18mm 22.5mm 33.5 mm 19.0 mm 12.5 mm Detective distance: 8cm Detective angle: 15-30 32.3mm 10.5mm 31.5mm 33mm 13mm Sensitive field: 10cm Sensitiveangle: 15-30 18mm 22.5mm 67.0 mm 73.5 mm EM Microwave Induction Switch & Dimmer 10.525GHz Set Sensor Output + S 1meter Press hold 5s Press hold 10s Press hold 15s Switch flash2times Switch (2-step dimming) flash4times Dimmer flash6times Light Sensing 22.0 mm Detection zone: Max.(DxH) 20 x 15m Detection angle: 150°(wall installation), 360°(ceilling installation) Holdtime: 10s/30s/90s/3min 10min/20min/30min 42.5 mm Power input + 5V level or PWM signal, high is ON, low is OFF Power input - 2 Induction sensor head installationand application ER: PIR Motion Sensor Ceilling mounting pattern Wall mounting pattern ER 1. Out of sensing range (Light off ) 120° 2.Sensing human activity (Light on) 3M 3.Light off when go away (Automatically turn off) 3M 3M ER 1.5M 3M 120° 2M As long as people are moving within the sensing range, the light will be on continuously 2M When installing, please pay attention to choosing a proper position and angle, otherwise the sensing distance will be very close or the sensing will be insensitive EW: Wood Touch Sensor Paste the sensor under the wood board or glass pane. EC: Touch Sensor Drill holes to expose the LED, Paste the sensor under the glass pane or wood board. EW Short touch to turn on or turn off light; long touch to dimming up or down. EC Short touch the LED to turn on or turn off light; long touch the LED to dimming up or down. ED / ED(C): Door Sensor Installed on the side where the door opens first. ED(C) Shielding sensing (door control): Use the door as a reflection object. It is installed at the outer edge of the cabinet door, about 1cm away from the outer edge. In case of smooth reflective materials, please refer to the actual situation to decrease / increase reflection distance. When the door open, or no obstacle ahead, the light turn on gradually; when the door close, or obstacle ahead, the light turn off gradually. EB /EB(C): Hand Sweep Sensor Make pendulum action at the front end of the sensor detector: when hand sweep, the light turn on gradually; when hand sweep again, the light turn off gradually. 5CM EB(C) >5CM User Manual Ver 2.0.0 3Corel PDF Engine Version 16.1.0.843 CorelDRAW X6