LENSGO 40H Portable Fog Machine

Specifications

• MODEL： 40H
• TYPE： COB 40W
• Colour temperature: 2700K-7000K
• Jadeite thumb ring： 96
• Batteries： 4 x 18650 14.8V
• Charging Voltage： 12V 2A
• Duration of use： Approx. 1 hour
• Adjustment range： Brightness adjustment 0%-100%
• Number of beads： Total 192 pcs
• Bead Voltage： 36 ~ 68V
• Bead Current： 1100mA

Product Usage Instructions

Product Features:
The 40H model is a COB 40W handheld light with dual colour temperature (2700-7000K) adjustment, high colour rendering index of 96, burst flash, and vintage flash styling. It can be used with mobile phones and cameras.

Operating Instructions:

Retro Handheld Light:

1. On/Off: Long-press to switch on/off, double-tap to enter FX mode. Push to switch between warm and cold light.
2. Indicator Light: Blue light when switching on full power, red light when power is low.
3. Knob: Turn clockwise to adjust brightness, turn anti-clockwise to dim. Double-click to enter colour temperature mode.
4. DC Charging Port: Charging voltage 12V 2A.
5. 1/4 Screw Hole: Mountable device with 1/4 thread interface.

Maintenance Instructions:
Use a soft sponge, soft cloth, or dry cloth to clean the product regularly. Avoid using bleach or wire balls for cleaning; keep the product dry.

Accessory Description:
The accessories include a mobile phone clip, a camera frame, hand screws, and other consumables. Contact the dealer for replacement parts if any ageing or damage is observed after use.

For more information on LENSGO product features, visit www.lensgo.net.

NOTES

• This manual provides information on the proper use and storage of the product and accessories, and assists the user in dealing with questions about their use and in understanding the safety precautions to be taken.

PLEASE READ CAREFULLY 
When handing the product over to another person, be sure to include this manual, heed all warnings and follow all instructions in the manual.

2 YEAR WARRANTY DESCRIPTION

• The warranty, which applies to all purchasers from our authorised dealers, covers any defects caused by production, as well as failures in the course of normal use, excluding physical damage, natural disasters (fire, flood, earthquake lightning, etc.) and chemical corrosion, unauthorised repairs, replacement of components during handling, collisions at the site of the installation and other failures due to human or force majeure reasons. And damage, or the manual
• Any malfunction caused by acts expressly prohibited by the instruction manual

ACCESSORY DESCRIPTION

• Mobile phone clip, camera frame, hand screws and other accessories are consumables (not in the 2-year warranty). After use, please confirm whether there is ageing, damage, or other conditions. This phenomenon is normal wear and tear. For use convenience, please contact the dealer in time to buy new parts for replacement!

MAINTENANCE METHODS

• Please use a soft sponge, soft cloth, dry cloth to clean the product regularly, do not use bleach, wire ball wipe, wipe clean and keep the product dry.

For more information on LENSGO product features, please visit WWW.lensgo.net..

LIST OF ACCESSORIES

• You will receive the following accessories (subject to the options available at the time of your order)

1. Handheld light
2. Silicone softbox
3. Mobile phone clip (horizontal/vertical)
4. Battery charger
5. Camera bracket (mobile phone holder can be mounted)
6. Hand screw X2

MODEL: 40H

Please read these instructions carefully before using this product

• WHEN USING, DO NOT SHINE THE LIGHT IN THE EYES TO PREVENT EYE BLURRING

INSTRUCTIONS 
40H is a COB 40W, dual colour temperature 2700-7000K adjustable, colour rendering index 96, burst flash, along with the vintage flash styling of the constant light, a mobile phone/camera can be used!

• 2700K – 7000K DUAL COLOUR TEMPERATURE
  • Knob-adjustable, infinitely dimmable, high display index to restore true colours
• WITH SILICONE SOFTBOX
  • The soft light amplitude is suitable; the light is soft and not harsh
• 0%-100% BRIGHTNESS ADJUSTABLE
  • Turning the adjustment knob, the brightness change range is 0-100%.

OPERATING INSTRUCTIONS

Product structure diagram.

1. On / Off
   • Long press to switch on/off, double tap to enter FX mode
   • Push to switch between warm and cold light
2. Indicator light
   • Blue light when switching on full power, red light when power is low
3. knob
   • Turn the knob clockwise to adjust the brightness of the light, and turn it counterclockwise to dim the brightness.
   • Double-click the knob to enter the colour temperature mode, adjust the cold light in the clockwise direction, adjust the warm light in the anti-clockwise direction, and double-click to exit after the adjustment is complete.
4. DC charging port
   • Charging voltage 12V 2A
5. 1/4 screw hole
   • Mountable device with a 1/4 thread interface

INSTRUCTIONS 

1. 2700K-7000K colour temperature adjustment
   Double-click 3 to enter the colour temperature mode, adjust the cold light in the direction of the clock, adjust the ambient light in the direction of the counterclock, and double-click to exit after the adjustment is completed
2. 0-100% brightness adjustable
   T 3urn clockwise to adjust the brightness of the light. This time, the light will be turned off by the % ratio of light, turning counterclockwise to dim the brightness
3. 8 lighting effects
   1Double click to enter FX mode
4. Push to switch between warm and cold light
   1Click for instant switching
5. Detecting power
   If 1f state, click to detect the power, display the current power % position. If none not them light up, please charge.

When charging, press the % 2 sequential flashing light; the full blue light is always on

FX MODE
8 different effects, press to switch, double click to exit after setting up

BRACKET DESCRIPTION

1. 1/4 screw hole, fits, locand ks 5 brackets to the light.
2. Expandable to mount any tripod device with 1/4 screws
3. 6With hand screws, the camera can be mounted to the bracket with a locking mechanism.
4. Expandable to mount any tripod device with 1/4 screws

WARNING

• Keep this product out of the reach of children in a safe place.
• Please use the original parts correctly.
• Before each use, please be sure to check whether the installation is stable to prevent accidents during use.
• Store in a cool, dry place, protect from exposure to the sun, waterproof

WARNING

1. Align the bracket to the bottom of the light first, and tighten the screw by hand
2. The camera is set up on the bracket and screwed in by hand.
3. Can be expanded to install any equipment witha  1/4 interface according to the use of demand

Before use, please carefully check whether the installation is stable or not.

Mobile phone usage

Adjustable horizontal/vertical racket

WARNING

1. Align the bracket to the bottom of the light first, and tighten the screw by hand.d
2. The camera is set up on the bracket and screwed in by hand.
3. Can be expanded to install any equipment with h 1/4 interface according to the use of demand

Before use, please carefully check whether the installation is stable or not.

WARNING

• Do not touch the COB lamp beads with your hands to prevent burning hands
• This product is a precision instrument; please avoid dropping it when using it.
• Contact authorised service personnel when repairs are required
• It is recommended to use the original LENSGO cables. Any damage to this product caused by the use of non-Longsong original accessories is not covered by our warranty. Any damage to this product is not covered by our warranty.
• Please clean the product with a soft, dry cloth.
• This specification is based on our rigorous testing. Design and specifications are subject to change without notice.
• Please keep it in a safe place, read this instruction manual carefully, and observe precautions.s
• Before use, please check whether the installation is stable to prevent accidents during use.
• Please switch off the product after charging to protect the safety and life of the battery. Try not to use it during charging. Use the product during charging.
• Do not cover the ventilation holes when using the silicone softbox.

CERTIFICATE OF CONFORMITY

If you have any questions, suggestions, or would like to share the wonderful works created with this light, please feel free to reach out to us through the channels below.

www.lensgo.net
LensgoOfficiaI
Lensgotech
Lensgo. official

JIAZHIYING PHOTOGRAPHY EQUIPMENT CO., LTD.

• Address: Room 201, Building C, No. 8 Fengqi Road, Fucheng’ao Community, Pinghu Subdistrict, Longgang District, Shenzhen, China
• Web：https://www.lensgo.net/
• Executive Standard: Q/LYJO
• Facebook: Lensgotech

FAQs

Q: How do I adjust the brightness of the light?

A: Turn the adjustment knob on the handheld light clockwise to increase the brightness and counterclockwise to decrease it. The brightness is adjustable from 0% to 100%.

Q: What should I do if the indicator light shows low power?

A: When the red indicator light shows low power, please charge the device using the provided DC charging port with a voltage of 12V and current of 2A.

Documents / Resources

LENSGO 40H Portable Fog Machine [pdf] User Manual 40H Portable Fog Machine, 40H, Portable Fog Machine, Fog Machine, Machine

References

• User Manual