15A Portable Fog Machine
“
Product Specifications:
- Model: 15A
- Accessories:
- 2 Silicone Diffusion Dome
- 1 Handheld light
- 3 Mobile phone clip (horizontal / vertical)
- 1 Type-C charging cable
- 1 Camera bracket + Hand screw x 2 + Cold shoe mount
- Charging Voltage: 5V 2A
- Brightness Levels: 10-100% adjustable
- Lighting Effects: 28 types
Product Usage Instructions:
Charging and Adjusting Brightness:
To charge the device, use the provided Type-C charging cable and
connect it to the Type-C charging port on the device. The charging
voltage should be 5V 2A. Turn the knob clockwise to adjust the
brightness of the light from 10% to 100%. The indicator light will
display the brightness level accordingly.
Operating Modes:
Use the button to control different modes:
- Long press to turn on/off the light.
- Double click to enter special effects mode.
- Single click to switch between cold/warm lighting.
Lighting Effects:
There are 28 types of lighting effects available. Double click
the button to enter special effects mode and press the button to
cycle through different effects. To exit special effects mode,
double click the button again.
Bracket Description:
The bracket features a 1/4 screw hole to fit 5, locking the
bracket to the light. It can be bent and used with the cold shoe
holder to mount the light on top of a camera. The bracket comes
with 6 hand screws for securing the camera.
Frequently Asked Questions (FAQ):
Q: How do I check the battery level?
A: In the shutdown state, click the button twice to check the
battery level. The indicator lights will display the current
battery level percentage. If no lights are on, please charge the
device.
Q: How do I switch between cold and warm lighting?
A: Click the button once to switch between cold and warm
lighting modes.
Q: How do I use different lighting effects?
A: Double click the button to enter special effects mode, then
press the button to cycle through the available effects. Double
click again to exit special effects mode.
“`
INSTRUCTION
MANUAL
MODEL: 15A
LIST OF ACCESSORIES
You will receive the following accessories (subject to the options available at the time of your order)
2 Silicone Diffusion Dome
1 Handheld light
3 Mobile phone clip (horizontal / vertical )
4 Type-C charging cable
5 Camera bracket + Hand screw X 2 + Cold shoe mount
OPERATING INSTRUCTIONS
Product structure diagram.
4
2 3
1
1 Type-C charging port
Charging voltage 5V2A
2 knob
Turn the knob clockwise to adjust the brightness of the light, and the indicator light will light up according to the% ratio. When turned counterclockwise, the brightness will be dimmed, and the indicator light will display according to the% brightness ratio
3 Indicator light
Turn on the blue light and flash the low battery red light
4 Button
Long press to turn on/off, Double click to enter special effects mode Click to switch between cold/warm lighting
2 1
3
10-100% adjustable brightness
Rotate clockwise by 1 to adjust the brightness of the light, and the indicator light will light up according to the percentage. Rotate counterclockwise to dim the brightness, and the indicator light will display according to the brightness%
28 types of lighting effects
Double click 2 to enter special effects mode
3Click to switch between cold/warm lighting
Click 3 to switch instantly
4Detecting battery level
In the shutdown state, click 2 to check the battery level and display the current battery level% position. If none of the lights are on, please charge
After turning on, the 4 indicator lights turn blue. If the red light flashes, please charge the device When charging, the lights will turn on in percentage order, and the blue light will remain on when fully charged
Power on Please recharge
Charging Fully charged
FX MODE
8 different effects, press to switch, double click to exit after setting up
LIGHTNING MODE
TV MODE
BAD BULB MODE
SOS
SOS MODE
BURST MODE
CANDLELIGHT MODE
PULSE FLASH MODE
HIGH AND LOW BEAM BULBS
BRACKET DESCRIPTION
1
2
3
5
6
1 1/4 screw hole, fits 5 , locks bracket to light.
2 The bracket can be bent and used in conjunction with the cold shoe holder to mount the light on top of the camera
3 With 6 hand screws, the camera can be mounted to the bracket with a locking mechanism.
! WARNING
Keep this product out of the reach of children in a safe place. Please use the original parts correctly. Before each use, please be sure to check whether the installation is stable, to prevent accidents during use. Store in a cool, dry place, prohibit exposure to the sun, waterproof
Camera Usage
! WARNING
1: Align the bracket to the bottom of the light first and tighten the screw by hand 2: The camera is set up on the bracket and screwed in by hand. 3: Can be expanded to install any equipment with 1/4 interface according to the use of demand
Before use, please carefully check whether the installation is stable or not.
Mobile phone usage
Adjustable horizontal/vertical racket
! WARNING
1: Align the bracket to the bottom of the light first and tighten the screw by hand 2: The camera is set up on the bracket and screwed in by hand. 3: Can be expanded to install any equipment with 1/4 interface according to the use of demand
Before use, please carefully check whether the installation is stable or not.
Camera Usage
15A is a COB 15W, colour rendering index 96, burst flash, along the vintage flash styling of the constant light, mobile phone / camera can be used!
WITH SILICONE SOFTBOX
The soft light amplitude is suitable, the light is soft and not harsh
0%-100% BRIGHTNESS ADJUSTABLE
Turning the adjustment knob, the brightness change range is 0-100%.
SPECIFICATION
MODEL
15A
TYPE
COB 15W
Colour temperature: /
Jadeite thumb ring 96
Batteries
2 x 18650 14.8V (2600mAh)
Charging Voltage Duration of use Adjustment range
12V 2A
Approx. 1 hour
(when used at maximum brightness)
Brightness adjustment 0%-100%
Number of beads Total 192 pcs
Bead Voltage
36 ~ 68V
Bead Current
1100mA
INSTRUCTIONS NOTES
This manual provides information on the proper use and storage of the product and accessories, and assists the user in dealing with questions about their use and in understanding the safety precautions to be taken.
PLEASE READ CAREFULLY
When handing the product over to another person, be sure to include this manual, heed all warnings and follow all instructions in the manual.
2 YEAR WARRANTY DESCRIPTION
The warranty, which applies to all purchasers from our authorised dealers, covers any defects caused by production, as well as failures in the course of normal use, excluding physical damage, natural disasters (fire, flood, earthquake lightning, etc.) and chemical corrosion, unauthorised repairs, replacement of components during handling, collisions at the site of the installation and other failures due to human or force majeure reasons. and damage, or the manual Any malfunction caused by acts expressly prohibited by the instruction manual
ACCESSORY DESCRIPTION
Mobile phone clip, camera frame, hand screws and other accessories are consumables (not in the 2-year warranty), after use, please confirm whether there is aging, damage and other conditions of this phenomenon is normal wear and tear, in order to use the convenience of please contact the dealer in time to buy new parts replacement!
MAINTENANCE METHODS
Please use a soft sponge, soft cloth, dry cloth to clean the product regularly, do not use bleach, wire ball wipe, wipe clean and keep the product dry.
For more information on LENSGO product features, Please visit W W W.lensgo.net
! WARNING
Do not touch the COB lamp beads with your hands to prevent burning hands
This product is a precision instrument, please avoid dropping it when using it.
Contact authorised service personnel when repairs are required
It is recommended to use the original LENSGO cables. Any damage to this product caused by the use of non-Longsong original accessories is not covered by our warranty. Any damage to this product is not covered by our warranty.
Please clean the product with a soft, dry cloth. This specification is based on our rigorous testing. Design and specifications are subject to change without notice
Please keep it in a safe place, read this instruction manual carefully, and observe all precautions
Before use, please check whether the installation is stable, to prevent accidents during use. Please switch off the product after charging, in order to protect the safety and life of the battery, try not to use it during charging. use the product during charging.
Do not cover the ventilation holes when using the silicone softbox.
CERTIFICATE OF CONFORMITY
PRODUCT NAME: MODEL INSPECTION DATE INSPECTOR:
QUALIFIED
Use your phone’s camera or browser to scan the QR code for product support and user guide.
OR PLEASE VISIThttps: // www.lensgo.net / and click on the ” User Guide ” menu.
JIAZHIYING PHOTOGRAPHY EQUIPMENT CO., LTD.
Address: Room 201, Building C, No. 8 Fengqi Road, Fucheng’ao Community, Pinghu Subdistrict, Longgang District, Shenzhen, China Webhttps://www.lensgo.net /
Documents / Resources
 |
LENSGO 15A Portable Fog Machine [pdf] Instruction Manual 15A Portable Fog Machine, Portable Fog Machine, Fog Machine, Machine |