LEDVANCE 4058075570917 Smart Plus WiFi Remote Control
Specifications
- Product Name: SMART+ WIFI INSTALLATION REMOTE CONTROL
- Model Number: SMHAeRrTe+
- EAN: 4058075570917
- Power Source: 2x AAA batteries (not included)
- Color Temperature: 6500K to 2700K
- Dimensions: 120mm x 41mm
Product Usage Instructions
Pairing and Group Selection:
To pair the remote control with your devices, follow these steps:
- Ensure the remote is in pairing mode (PAIRING ON).
- Select the desired group (A, B, or both A and B).
- Press and hold the ON button for more than 5 seconds to complete pairing.
Changing Light Scenes:
To change light scenes using the remote control:
- Select the desired scene button (1-5).
- Press ON or OFF to activate or deactivate the scene.
- You can also create custom scenes by following the instructions on the manual.
Battery Check and Replacement:
To check the battery status:
- Press and hold the BATTERY CHECK button for more than 5 seconds.
- The LED indicator will show the remaining battery life (6 months at 5 clicks per day).
- If the battery needs replacement, open the battery compartment and replace with 2 new AAA batteries.
Customer Support:
If you need further assistance or have any questions, visit our customer support page at LEDVANCE Customer Support.
FAQ
- Do you want to enable the RC ability?
- To enable the RC ability, select OK using the remote control.
- How many devices can be connected?
- You can connect up to 15 devices, although this may vary based on your WiFi router settings.
- Where can I find the EU Declaration of Conformity?
- The full text of the EU Declaration of conformity is available at this.link.
What In Box
Product Overview
App Instruction
Product Usage Instructions
PAIRING
GROUP SELECT
CHANGE SCENE
- Set light scene
- Select scene button
- Save scene
UNPAIRING & RESET
BATTERY CHECK
CUSTOMER SUPPORT
Declaration
Hereby, LEDVANCE GmbH declares that the radio equipment type LEDVANCE SMART+ Device is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: smartplus.ledvance.com/declaration-of-conformity. Wireless radio used in WIFI lamps/ luminaires /components 2412–2484 MHz, max. RF output power 16dBm. Wireless radio used in Bluetooth lamps/ luminaires /components 2402–2480 MHz, max. RF output power 9.5dBm
Replacement of a battery with an incorrect type can defeat safeguard (for example, in the case of some lithium battery types). Altitude during operation: 2000 m.
- LEDVANCE GmbH
- Steinerne Furt 62
- 86167 Augsburg, Germany
- www.ledvance.com
Documents / Resources
 |
LEDVANCE 4058075570917 Smart Plus WiFi Remote Control [pdf] Installation Guide 4058075570917, 4058075570917 Smart Plus WiFi Remote Control, Smart Plus WiFi Remote Control, WiFi Remote Control, Remote Control, Control |
