RGBW LED Mini RF Controller
Model No.: V4-W
User Manual
V4-W RGBW LED Mini RF Controller
4 channel constant voltage/Max 75W/Step-less dimming/Wireless remote control
 |
 |
 |
|
V4-W |
V4-W(CJ) |
V4-W(DJ) |
Model List
|
Model |
Photo | Power Connector |
LED Connector |
| V4-W |  |
Red/Black Cable 10cm | 5-color Flat Cable 10cm |
| V4-W(CJ) |  |
Red/Black Cable 10cm | 5-pin Flat Female Jack |
| V4-W(DJ) |  |
5.5mm DC Female Jack
|
5-pin Flat Female Jack |
Features
- 4 channel constant voltage RGBW LED mini RF controller.
- 1A per channel, output connected with 5 meters RGBW LED strip, max output power 75W.
- Match with RF 2.4G single zone or multiple zone RGB/RGBW remote control.
- One RF controller accepts up to 10 remote control.
- 4096 levels 0-100% dimming smoothly without any flash.
- Built-in 10 dynamic modes, including jump or gradual change style.
- Auto-transmitting function: Controller automatically transmits a signal to another controller with a 30m control distance.
- Synchronize on multiple controllers.
Dimension
Technical Parameters
| Input and Output | |
| Input voltage | 12-24VDC |
| Output voltage | 12-24VDC |
| Output power | Max. 75W |
| Output type | Constant voltage |
| Environment | |
| Operation temperature | Ta: -30ºC ~ +55ºC |
| Case temperature (Max.) | T c: +85ºC |
| IP rating | IP20 |
| Safety and EMC | |
| EMC standard (EMC) | ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-17 V3.2.4 |
| Safety standard(LVD) | EN 62368-1:2020+A11:2020 |
| Radio Equipment(RED) | ETSI EN 300 328 V2.2.2 |
| Certification | CE,EMC,LVD,RED |
| Dimming data | |
| Input signal | RF 2.4GHz |
| Control distance | 30m(Barrier-free space) |
| Dimming grayscale | 4096 (2^12) levels |
| Dimming range | 0 -100% |
| Dimming curve | Logarithmic |
| PWM Frequency | 500Hz (default) |
| Warranty and Protection | |
| Warranty | 5 years |
| Protection | Reverse Polarity |
| Weight | |
| Gross weight | 0.008kg |
| Net weight | 0.038kg |
Wiring Diagram
Match Remote Control
Match:
Switch off the power of the receiver, then switch on the power, and repeat again.
An immediately short press on/off key (single zone remote) or zone key (multiple zones remote) 3 times on the remote.
The light blinks 3 times means the match is successful.
Delete:
Switch off the power of the receiver, then switch on the power, and repeat again.
An immediately short press on/off key (single zone remote) or zone key (multiple zones remote) 5 times on the remote.
The light blinks 5 times means all matched remotes were deleted.
Application notes
1. All the receivers are in the same zone.
Auto-transmitting: One receiver can transmit the signals from the remote to another receiver within 30m, as long as there is a receiver within 30m, the remote control distance can be limitless.
Auto-synchronization: Multiple receivers within a 30m distance can work synchronously when they are controlled by the same remote, under the same dynamic mode, and with the same speed.
Receiver placement may offer up to 30m communication distance. Metals and other metal materials will reduce the range.
Strong signal sources such as WiFi routers and microwave ovens will affect the range.
We recommend for indoor applications that receiver placements should be no further apart than15m.
2. Each receiver(one or more) is in a different zone, like zone 1, 2, 3, or 4.
RGBW dynamic mode list
| No. | Name | No. | Name |
| 1 | RGB jump | 6 | RGB fade in and out |
| 2 | RGB smooth | 7 | Red fade in and out |
| 3 | 6 color jump | 8 | Green fade in and out |
| 4 | 6 color smooth | 9 | Blue fade in and out |
| 5 | Yellow cyan purple smooth | 10 | White fade in and out |
Dimming Curve
Malfunctions analysis & troubleshooting
| Malfunctions | Causes | Troubleshooting |
| No light | 1. No power. 2. Wrong connection or insecurity. |
1. Check the power. 2. Check the connection. |
| Wrong color | 1. Wrong connection of R/G/B/W wires. | 1. Reconnect R/G/B/W wires. |
| No response from the remote | 1. The battery has no power. 2. Beyond controllable distance. 3. The controller did not match the remote. |
1. Replace the battery. 2. Reduce remote distance. 3. Re-match the remote. |
V4-W
RGBW LED Mini RF Controller
User Manual Ver 1.0.6
Documents / Resources
 |
LEDLyskilder V4-W RGBW LED Mini RF Controller [pdf] User Manual V4-W, RGBW LED Mini RF Controller, V4-W RGBW LED Mini RF Controller, Mini RF Controller, RF Controller |
