LEDLyskilder V1-M Single Color LED Mini RF Controller
Model No.: V1-M, V1-M(D)
1 channel constant voltage/Max 5A output/Step-less dimming/Wireless remote control
Model List
Features
- 1 channel constant voltage single color LED mini RF controller.
- 5A output, connect with 5 meters single color LED strip.
- Match with RF 2.4G single zone or multiple zones dimming remote control.
- One RF controller accepts up to 10 remote control.
- 4096 levels 0-100% dimming smoothly without any flash.
- Auto-transmitting function: Controller automatically transmits a signal to another controller with 30m control distance.
- Synchronize on multiple controllers.
Dimension
Technical Parameters
| Input and Output | |
| Input voltage | 12-24VDC |
| Output voltage | 12-24VDC |
| Output current | Max. 5A |
| Output type | Constant voltage |
| Safety and EMC | |
| EMC standard (EMC) | ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4 |
| Safety standard(LVD) | EN 62368-1:2020+A11:2020 |
| Radio Equipment(RED) | ETSI EN 300 328 V2.2.2 |
| Certification | CE,EMC,LVD,RED |
| Warranty and Protection | |
| Warranty | 5 years |
|
Protection |
Reverse polarity
Over heat Short circuit |
| Dimming data | |
| Input signal | RF 2.4GHz |
| Control distance | 30m(Barrier-free space) |
| Dimming gray scale | 4096 (2^12) levels |
| Dimming range | 0 -100% |
| Dimming curve | Logarithmic |
| PWM Frequency | 500Hz (default) |
| Environment | |
| Operation temperature | Ta: -30 OC ~ +55 OC |
| Case temperature (Max.) | T c: +85OC |
| IP rating | IP20 |
Wiring Diagram
Match Remote Control
Match:
Switch off the power of the receiver, then switch on the power, and repeat again.
An immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful.
Delete:
Switch off the power of the receiver, then switch on the power, and repeat again.
An immediately short press on/off key (single zone remote) or zone key (multiple zones remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted.
Application notes
All the receivers in the same zone
Auto-transmitting:
One receiver can transmit the signals from the remote to another receiver within 30m, as long as there is a receiver within 30m, the remote control distance can be limitless.
Auto-synchronization:
Multiple receivers within 30m distance can work synchronously when they are controlled by the same remote.
Receiver placement may offer up to 30m communication distance. Metals and other metal materials will reduce the range. Strong signal sources such as WiFi routers and microwave ovens will affect the range. We recommend for indoor applications that receiver placements should be no further apart than15m.
Each receiver(one or more) in a different zone, like zone 1, 2, 3 or 4
Dimming Curve
Malfunctions analysis & troubleshooting
| Malfunctions | Causes | Troubleshooting |
|
No light |
1. No power.
2. Wrong connection or insecure. |
1. Check the power.
2. Check the connection. |
|
No response from the remote |
1. The battery has no power.
2. Beyond controllable distance. 3. The controller did not match the remote. |
1. Replace battery.
2. Reduce remote distance. 3. Re-match the remote. |
Documents / Resources
 |
LEDLyskilder V1-M Single Color LED Mini RF Controller [pdf] User Manual V1-M, V1-M D, Single Color LED Mini RF Controller, LED Mini RF Controller, Mini RF Controller, V1-M, RF Controller |
