TOUCH TRIGGER
DATA SHEET
PRODUCT OVERVIEW
The TX10 LED Touch Trigger has eight independent buttons, allowing you to trigger light effects using DMX, as well as a dimming slider and On/Off button. It is simple and affordable, making it an excellent choice for budget installations where triggering up to 8 effects is all that is needed.
The TX10 should be used in conjunction with either an LED CTRL PX or MX device. The PX/MX should be configured to have effects stored on an SD card which can then be triggered from the TX via the AUX port on the PX/MX.
Refer to the TX10 Quick Start Guide for set-up information.
KEY FEATURES
- MULTI-ZONE CONTROL – UP TO 8 DIFFERENT ZONES/EFFECTS
- EASY INSTALLATION AND INTEGRATION
- SIMPLE OPERATION
- LONG LIFESPAN
- AFFORDABLE PRICE
SPECIFICATIONS
| Input Voltage | DC12V – DC24V |
| Operating Temperature Range | -300C to 500C |
| Dimensions | 85.5 x 85.5 x 15mm (L x W x H) |
| Certifications | CE |
| Housing Colour | Black/White/Grey |
| Housing Material | Aluminium |
| Environment | Indoor |
| IP Rating | IP20 |
| Functions | Scene select, Dimmer, On/Off |
| Control | DMX |
| Zones | 8 |
| Number of Channels | 9 |
| Product Type | DMX Trigger Panel |
| Power Supply Mounting | External |
| Mounting | Built-in |
The TX10 is compatible with the PX24 and MX96 when used with a SD card to trigger saved scenes or initiate effects through LED CTRL via a DMX to Artnet device.
OVERALL DIMENSIONS
WIRING DIAGRAM
Documents / Resources
 | LEDCTRL TX10 LED Touch Trigger [pdf] Owner's Manual TX10, TX10 LED Touch Trigger, LED Touch Trigger, Touch Trigger, Trigger |