LEAP S3 Android TV Box
Important Information
How do I reconfigure the volume settings of my LEAP S3 when my volume level is too low?
If the volume level of your LEAP S3 is too low, you can follow the procedure below to reset the parameters of your LEAP S3.
During the installation of your LEAP S3, you can set up the volume control to be handled by HDMI-CEC. When this option is enabled, your LEAP S3 remote can be used to adjust the volume level of your TV.
You can activate or deactivate this feature in the display and sound settings of your TV.
The default volume level of your LEAP S3 is set up to a certain level, and it can be either too low. If the volume is too low it is better to deactivate this option.
How can you activate or deactivate this feature?
In this case, press the Settings button on your Google remote and press the OK
(https://support-strong-eu.cos/2024/09/Settings-Button-RCU.webp).
Settings
In the Settings page displayed on your screen, select “Display and sound”. Then, press the right navigation button and select “HDMI-CEC”.
(https://support-strong-eu.com/wp-content/uploads/2024/09/Sound-Settings-S1-1.jpg).
Volume Control
Select “Volume Control” and press the OK button to switch OFF this feature
Go back to the Home page
Press the HOME button to go back to the home screen.
The volume adjustment can now be done again with LEAP-S3 remote control.
(https://support-strong-eu.com/support-cen-do-i-reset-the-leap-s3-to-its-factory-settings/)
Documents / Resources
 |
LEAP S3 Android TV Box [pdf] Instructions S3 Android TV Box, S3, Android TV Box, TV Box |