LC POWER-LOGO

LC POWER LC-DOCK-U3-HUB HDD Docking Station

LC POWER-LC-DOCK-U3-HUB-HDD-Docking-Station

Introduction
Thank you for choosing our product. Please read the manual carefully before you use the product.

Service
If you need technical support, please contact us via support@l-power.com.
If you need after sales service, please contact your retailer.

Specifications

LC-DOCK-U3-HUB: HDD/SSD Docking Station / USB 3.0 hub

LC POWER-LC-DOCK-U3-HUB-HDD-Docking-Station-1

Item LC-DOCK-U3-HUB
HDD 2,5″/3,5″ HDDor SSD (Festplatte oder SSD)
Quantity 2 pcs.
Docking: Dualbay
Interface SATA, USB 3.0 (compatible to/ kompatibel zu:USB 2.0)
Function 3portuse3.0hub,1:1cloning,readandwritedata
Size 153 x 112 x 63 mm
Operating s tem Windows 7/8/10,MacOS
Package contents DockingStation, user manual, USB cable, power adapter

Installation

  1. HDD/SSD read/write
    Insert the drive(s) correctly into the docking station and connect it to the USB port of vour computer.LC POWER-LC-DOCK-U3-HUB-HDD-Docking-Station-2
  2. Connect the power adapter and turn on the device. The drive(s) shall be recognised automatically by your computer.LC POWER-LC-DOCK-U3-HUB-HDD-Docking-Station-3

Note:

  1. Already used drives can be found directly, new drives need to be initialised and formatted first.

New drive

  1. Go to „Computer – Manage – Disk management” to find the new drive.LC POWER-LC-DOCK-U3-HUB-HDD-Docking-Station-4LC POWER-LC-DOCK-U3-HUB-HDD-Docking-Station-5
  2. Right-click “Disk 1”, then click “New Simple Volume”,LC POWER-LC-DOCK-U3-HUB-HDD-Docking-Station-6
  3. Choose the size of the new partition and dick “Next” to finish.LC POWER-LC-DOCK-U3-HUB-HDD-Docking-Station-7
  4. You can now find the new drive at „Computer”‘, it’s ready to be used.LC POWER-LC-DOCK-U3-HUB-HDD-Docking-Station-8

Features

Cloning 

  1. Insert a 2,5″/3,5″ HDD/SSD into bay 1 and bay 2.
    Note: Drive 2 must have an equal or higher capacity than drive 1.LC POWER-LC-DOCK-U3-HUB-HDD-Docking-Station-9
  2. Power on the device. A USB connection is not necessary.LC POWER-LC-DOCK-U3-HUB-HDD-Docking-Station-10
  3. When the red power LED is on, press the „Clone” button until the blue clone % LEDs shine. Release the button to start the cloning process from drive 1 to drive 2. The blue progress LEDs flicker.LC POWER-LC-DOCK-U3-HUB-HDD-Docking-Station-11
  4. The blue LEDs will blink according to the current cloning state (25/50/75/100%).LC POWER-LC-DOCK-U3-HUB-HDD-Docking-Station-12
  5. When all four LEDs light up, cloning has finished.LC POWER-LC-DOCK-U3-HUB-HDD-Docking-Station-13

Silent Power Electronics GmbH, Formerweg 8, 47877 Willich, Germany, www.lc-power.com

Documents / Resources

LC POWER LC-DOCK-U3-HUB HDD Docking Station [pdf] User Manual
LC-DOCK-U3-HUB HDD Docking Station, LC-DOCK-U3-HUB, HDD Docking Station, Docking Station

References

Leave a comment

Your email address will not be published. Required fields are marked *