ZEBRA MC3450 Series Mobile Computer User Guide

Check the device screen under Settings > Regulatory for
specific regulatory marks. For additional country markings, refer
to the Declaration of Conformity (DoC) at zebra.com/doc.

Health and Safety Recommendations:

Consult with Health and Safety Manager for ergonomic practices.
Follow workplace safety programs to prevent injuries.

Vehicle Installation:

Install equipment properly to avoid RF signal interference in
vehicles. Position the device within reach without causing driver
distractions. Check national laws on distracted driving before
use.

Safety on the Road:

Focus on driving, obey wireless device regulations while
driving. Use devices safely while driving.

Restricted Use Locations:

Follow restrictions and instructions in restricted locations for
electronic devices.

Safety in Hospitals and Aircraft:

Switch off wireless devices in hospitals, clinics, and aircraft
when requested to prevent interference with sensitive
equipment.

RF Exposure Guidelines:

Avoid staring directly into Class 2 laser beams. Follow
specified procedures to prevent hazardous laser exposure.

Frequently Asked Questions (FAQ):

Q: Can I charge the device if it gets wet?

A: Do NOT attempt to charge damp/wet mobile computers, printers
or batteries. All components must be dry before connecting to an
external power source.

Q: Where can I find the regulatory markings?

A: The regulatory marks specific to this device are available on
the screen by following these instructions: Go to Settings >
Regulatory.

View Fullscreen

MC3450 Series Regulatory Guide
Regulatory Information
This device is approved under Zebra Technologies Corporation. This guide applies to the following model numbers: · MC345A · MC345B · MC345C All Zebra devices are designed to be compliant with the rules and regulations in the locations they are sold and will be labeled as required. Local language translation / (BG) / (CZ) Peklad do místního jazyka / (DE) Übersetzung in die Landessprache / (EL) / (ES) Traducción de idiomas locales / (ET) Kohaliku keele tõlge / (FI) Paikallinen käännös / (FR) Traduction en langue locale / (HR) Prijevod na lokalni jezik / (HU) Helyi nyelv fordítás / (IT) Traduzione in lingua locale / (JA) / (KR) / (LT) Vietins kalbos vertimas / (LV) Tulkojums vietjvalod / (NL) Vertaling in lokale taal / (PL) Tlumaczenie na jzyk lokalny / (PT) Tradução do idioma local / (RO) Traducere în limba local / (RU) / (SK) Preklad do miestneho jazyka / (SL) Prevajanje v lokalni jezik / (SR) / (SV) Översättning av lokalt språk / (TR) Yerel dil çevirisi / (ZH-CN) / (ZH-TW) zebra.com/support Any changes or modifications to Zebra equipment not expressly approved by Zebra could void the user’s authority to operate the equipment. Declared maximum operating temperature: 50°C
CAUTION: Only use Zebra approved and NRTL-certified accessories, battery packs, and battery chargers. Do NOT attempt to charge damp/wet mobile computers, printers or batteries. All components must be dry before connecting to an external power source.
Bluetooth® Wireless Technology
This is an approved Bluetooth® product. For more information on the Bluetooth SIG listing, please visit bluetooth.com.
Regulatory Markings
Regulatory markings subject to certification are applied to the device. Refer to the Declaration of Conformity (DoC) for details of other country markings. The DOC is available at: zebra.com/doc. The regulatory marks specific to this device (including FCC and ISED) are available on the screen of the device by following these instructions: Go to Settings > Regulatory.

ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corp., registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. © 2025 Zebra Technologies Corp. and/or its affiliates. All rights reserved. | zebra.com

MN-004905-01EN

Health and Safety Recommendations
Ergonomic Recommendations
In order to avoid or minimize the potential risk of ergonomic injury, always follow good ergonomic workplace practices. Consult with your local Health and Safety Manager to ensure that you are adhering to your company’s safety programs to prevent employee injury.
Vehicle Installation
RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles (including safety systems). Check with the manufacturer or its representative regarding your vehicle. Ensure the equipment is installed to avoid driver distractions. You should also consult the manufacturer about any equipment that has been added to your vehicle. Position the device within easy reach. User should be able to access the device without removing their eyes from the road.
IMPORTANT: Before installing or using, check national and local laws regarding distracted driving.
Safety on the Road
Give your full attention to driving. Obey the laws and regulations on the use of wireless devices in the areas where you drive. The wireless industry reminds you to use your device / phone safely when driving.
Restricted Use Locations
Remember to observe restrictions and obey all signs and instructions on the use of electronic devices in restricted use locations.
Safety in Hospitals and Aircraft
Wireless devices transmit radio frequency energy that may affect medical electrical equipment and aircraft’s operation. Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics, healthcare facilities or by airline staff. These requests are designed to prevent possible interference with sensitive equipments.
Medical Devices
It is recommended that a minimum separation distance of 20 cm (8 in.) be maintained between a wireless device and a medical devices such as pacemakers, defibrillator, or other implantable devices to avoid potential interference with the medical device. Pacemaker users should keep the device at the opposite side of the pacemaker or turn OFF the device if suspected of interference. Please consult your physician or the manufacturer of the medical device to determine if the operation of your wireless product may interfere with the medical device.
2

RF Exposure Guidelines
Safety Information
Reducing RF Exposure Use Properly
Only operate the device in accordance with the instructions supplied. The device complies with internationally recognized standards covering human exposure to electromagnetic fields. For information on international human exposure to electromagnetic fields, refer to the Zebra Declaration of Conformity (DoC) at zebra.com/doc. Use only Zebra tested and approved headset, belt-clips, holsters, and similar accessories to ensure RF exposure compliance. If applicable, follow the instructions for use as detailed in the accessory guide. The use of third-party belt clips, holsters, and similar accessories may not comply with RF exposure compliance requirements and should be avoided. For further information on the safety of RF energy from wireless devices, refer to RF exposure and assessment standards section at zebra.com/responsibility. To satisfy RF exposure requirements, this device must be handheld only and, where applicable, use only with Zebra tested and approved accessories.
Optical Devices
Laser

Class 2 laser scanners use a low power, visible light diode. As with any very bright light source such as the sun, the user should avoid staring directly into the light beam. Momentary exposure to a Class 2 laser is not known to be harmful.
CAUTION: Use of controls, adjustments, or the performance of procedures other than those specified in the supplied product documentation may result in hazardous laser light exposure.

SE4770 SE55 SE58

Wavelength: 630-680nm Maximum output: 1 mW Pulse duration: 12.5ms Beam divergence: 42.7 ° Repetition rate: 16.9ms
Wavelength: 500-570nm Maximum output: 1 mW Pulse duration: 4ms Beam divergence: 18 ° Repetition rate: 18 ms
Wavelength: 500-570nm

Scanner Labeling

Maximum output: 2mW Pulse duration: 4ms Beam divergence: 42 ° Repetition rate: 16.7ms
1
SE4770
630-680
SE55/SE58

Labels read:

COMPLIES WITH 21 CFR1040.10 AND 1040.11 EXCEPT FOR DEVIATIONS PURSUANT TO LASER NOTICE NO. 56, DATED MAY 08, 2019 AND IEC/EN60825-1:2014

1. Laser Light — do not stare into beam.

Class 2 Laser product. 630-680mm,1mW (applied to SE4770)

Laser Light — do not stare into beam.

Class 2 Laser product. 500-570mm, 1mW (applied to SE55, SE58)

2. Complies with 21 CFR1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 56, dated May 08, 2019 and IEC/EN 60825-1:2014.
3. Caution — Class 2 laser light when open. Do not stare into the beam.

CAUTION: Laser light emitted from this apeture.

LED

Laser Light — do not stare into beam Class 2 Laser product. 630-680mm, 1mW (applied to SE4770) Laser Light — do not stare into beam Class 2 Laser product. 500-570mm,1mW (applied to SE55, SE58)
Risk Group classified according to IEC 62471:2006 and EN62471:2008. · SE4710 Pulse Duration: 17.7 ms Exempt Group (RG0) · SE4770 Pulse Duration: 17.7 ms Exempt Group (RG0)

· SE55 Pulse Duration: CW Exempt Group (RG0)
· SE58 Pulse Duration: 6 ms Exempt Group (RG0)
Power Supply
WARNING ELECTRICAL SHOCK: Use only a Zebra approved, Certified ITE LPS power supply with appropriate electrical ratings. Use of alternative power supply will invalidate any approvals given to this unit and may be dangerous.
Batteries and Power Packs
This information applies to Zebra-approved batteries and power packs containing batteries.
Battery Information
CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of batteries according to instructions.
Use only Zebra approved batteries. Accessories that have battery charging capability are approved for use with the following battery models: · Model BT-000375 Rev B (3.6 VDC, 7000 mAh) · Model BT-000375B (3.6 VDC, 7000 mAh) Zebra approved rechargeable battery packs are designed and constructed to the highest standards within the industry. However, there are limitations as to how long a battery can operate or be stored before needing replacement. Many factors affect the actual life cycle of a battery pack such as heat, cold, harsh environmental conditions, and severe drops. When batteries are stored over six months, some irreversible deterioration in overall battery quality may occur. Store batteries at half charge in a dry, cool place, removed from the equipment to prevent loss of capacity, rusting of metallic parts, and electrolyte leakage. When storing batteries for one year or longer, the charge level should be verified at least once a year and charged to half charge. Replace the battery when a significant loss of run time is detected. Standard warranty period for all Zebra batteries is one year, regardless if the battery was purchased separately or included as part of the host device. For more information on Zebra batteries, please visit zebra.com/batterydocumentation and select the Battery Best Practices link.
Battery Safety Guidelines
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS
WARNING When using this product basic safety precautions should always be followed, including the following:
· The area in which the units are charged should be clear of debris and combustible materials or chemicals. Particular care should be taken where the device is charged in a non-commercial environment.
· Read all the instructions before using the product.
5

· Follow battery usage, storage, and charging guidelines found in the user’s guide. · Improper battery use may result in a fire, explosion, or other hazard. · Batteries subjected to extremely low air pressure may result in an explosion or the leakage of
flammable liquid or gas. · To charge the mobile device battery, the battery and charger temperatures must be between
0°C and 40°C (32°F and 104°F). · Do not use incompatible batteries and chargers. Use of an incompatible battery or charger may present
a risk of fire, explosion, leakage, or other hazard. If you have any questions about the compatibility of a battery or a charger, contact Zebra support.
Marking and European Economic Area (EEA)
Statement of Compliance
Zebra hereby declares that this radio equipment is in compliance with Directives 2014/53/EU and 2011/65/EU. Any radio operation limitations within EEA countries are identified in Appendix A of EU Declaration of Conformity. The full text of the EU Declaration of Conformity is available at zebra.com/doc.
Environmental Compliance
For compliance declarations, recycling information, and materials used for products and packaging please visit zebra.com/environment. EU Importer : Zebra Technologies B.V Address: Mercurius 12, 8448 GX Heerenveen, Netherlands
Waste Electrical and Electronic Equipment (WEEE)
For EU and UK Customers: For products at the end of their life, please refer to recycling/disposal advice at zebra.com/weee.
6

United States and Canada Regulatory
Radio Frequency Interference Notices
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. · Operation of transmitters in the 5,925 – 7,125 GHz band is prohibited for control of communications with unmanned aircraft systems.
Radio Frequency Interference Requirements Canada
Innovation, Science and Economic Development Canada ICES-003 Compliance Label: CAN ICES-003 (B)/NMB-003(B) This device complies with Innovation, Science and Economic Development Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radio électrique subi même si le brouillage est susceptible d’en compromettre le fonctionnement. This device is restricted to indoor use when operating in the 5150 to 5350 MHz frequency range. Lorsqu’il fonctionne dans la plage de fréquences 5 150- 5350 MHz, cet appareil doit être utilisé exclusivement en extérieur. Operation of transmitters in the 5,925 – 7,125 GHz band is prohibited for control of communications with unmanned aircraft systems. L’exploitation d’émetteurs dans la bande 5,925 – 7,125 GHz est interdite pour le contrôle ou les communications avec les systèmes d’aéronefs sans pilote. Devices shall not be used for control of or communications with unmanned aircraft systems. Les dispositifs ne doivent pas être utilisés pour commander des systèmes d’aéronef sans pilote ni pour communiquer avec de tels systèmes.
7

RF Exposure Requirements – FCC and ISED
The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated in compliance with the FCC RF emission guidelines. SAR information on this device is on file with the FCC and can be found under the Display Grant section of fcc.gov/oet/ea/fccid. To satisfy RF exposure requirements, this device must operate with a minimum separation distance of 1.5 cm or more from a user’s body and nearby persons. Pour satisfaire aux exigences d’exposition aux radio fréquences, cet appareil doit fonctionner avec une distance de séparation minimale de 1.5 cm ou plus de corps d’une personne. To satisfy RF exposure requirements, this device must be hand-held only and, where applicable use only with Zebra tested and approved accessories. Pour satisfaire aux exigences en matière d’exposition aux radiofréquences, cet appareil doit être tenu dans la main seulement et, le cas échéant, utilisé uniquement avec des accessoires testés et approuvés par Zebra.
Hotspot Mode To satisfy RF exposure requirements in hotspot mode, this device must operate with a minimum separation distance of 1.0 cm or more from a user’s body and nearby persons. Pour satisfaire aux exigences d’exposition RF en mode hotspot, cet appareil doit fonctionner avec une distance de séparation minimale de 1,0 cm ou plus du corps de l’utilisateur et des personnes à proximité.
Hotspot ISED Notice When operating in hotspot mode, this device is restricted to indoor use when operating in the 5150 5350 MHz frequency range. En mode de connexion partagée (hotspot), l’utilisation de cet appareil doit se faire exclusivement en extérieur lorsqu’il fonctionne dans la plage de fréquences 5150 5350 MHz.
UL Listed Products with GPS
Underwriters Laboratories Inc. (UL) has not tested the performance or reliability of the Global Positioning System (GPS) hardware, operating software, or other aspects of this product. UL has only tested for fire, shock, or casualties as outlined in UL’s Standard(s) for Safety for Information Technology Equipment. UL Certification does not cover the performance or reliability of the GPS hardware and GPS operating software. UL makes no representations, warranties, or certifications whatsoever regarding the performance or reliability of any GPS related functions of this product.
Marquage UL des produits équipés d’un GPS
Les tests menés par Underwriters Laboratories Inc. (UL) ne portent ni sur les performances, ni sur la fiabilité du matériel et du logiciel d’exploitation du GPS (Global Positioning System), ni sur tout autre aspect de ce produit. UL a uniquement testé la résistance au feu, aux chocs et aux sinistres, comme le définit la norme UL60950-1 relative à la sécurité des matériels de traitement de l’information. La certification UL ne couvre ni les performances, ni la fiabilité du matériel et du logiciel d’exploitation GPS. UL ne formule aucune déclaration, ni ne délivre aucune garantie ni aucun certificat concernant les performances et la fiabilité des fonctions GPS de ce produit.
8

Brasil

Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar interferência em sistemas devidamente autorizados.
Este dispositivo está em conformidade com as diretrizes de exposição a radiofrequência quando posicionado à pelo menos 2.5 cm do corpo.

zebra.com/support : tenaa.com.cn. :

2W/kg 20W/m² GB21288-2022 CCC ” ” ISM 5000
9

SJ/T 11364
O: GB/T 26572
X: GB/T 26572 ( “×”

Colombia
Señor usuario, la siguiente información se entrega de conformidad con lo establecido en el Régimen de protección de los derechos de los usuarios, expedido por la Comisión de Regulación de Comunicaciones.
Recomendaciones de uso:
1. Utilice siempre que pueda dispositivos manos libres.
2. Evite utilizar el equipo mientras conduce un vehículo.
3. En caso que el teléfono sea utilizado por niños, ancianos, mujeres embarazadas y población inmunocomprometida, consulte a su médico y el manual del equipo.
4. Si usted utiliza algún dispositivo electrónico de uso médico, asegúrese que el mismo esté protegido contra las ondas de radiofrecuencia externas.
5. Apague su teléfono en lugares tales como: hospitales, centros de salud, aviones, estaciones de suministro de combustible, en presencia de gases explosivos y lugares donde se realizan explosiones.
6. Evite que terceros hagan uso de su teléfono para prevenir la implantación de dispositivos como programas espías (spyware) o identificadores ocultos, que atentan contra la seguridad de la información contenida en el mismo.

(EAC)
EAC.

France
Cet appareil a été testé et déclaré conforme aux limites applicables d’exposition aux radiofréquences (RF). Le débit d’absorption spécifique (DAS) local quantifie l’exposition de l’utilisateur aux ondes électromagnétiques de l’équipement concerné. Les valeurs SAR les plus élevées sont disponibles sur la déclaration de conformité (DoC) disponible sur: zebra.com/doc
México
La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada. LOCALIZACIÓN DEL IMEI. El IMEI está disponible en la etiqueta del producto y en la pantalla del dispositivo siguiendo estas instrucciones.
Opción 1: Ir a Ajustes > Acerca del teléfono.
Opción 2: Vaya a la aplicación Teléfono: Marque *#06#.

/ 9 13
(EPA) 15

(MC345A, MC345B, MC345C)

–

—

1. 0.1 wt % 0.01 wt %

2. O 3. –

Note 1: “Exceeding 0.1 wt%” and “exceeding 0.01 wt%” indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. Note 2: “O” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. Note 3: The ” – ” indicates that the restricted substance corresponds to the exemption.

Türkiye
Bu cihaz Türkçe karakterlerin tamamini ihtiva eden ETSI TS 123.038 V8.0.0 (veya sonraki sürümünkodu) ve ETSI TS 123.040 V8.1.0 (veya sonraki sürümün kodu) teknik özelliklerine uygundur.
TÜRK WEEE Uyumluluk Beyani
EEE Yönetmeliine Uygundur.

United Kingdom

Statement of Compliance

Zebra hereby declares that this radio equipment is in compliance with the Radio Equipment Regulations 2017 and the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012.
Any radio operation limitations within UK are identified in Appendix A of UK Declaration of Conformity.
The full text of the UK Declaration of Conformity is available at: zebra.com/doc.
UK Importer: Zebra Technologies Europe Limited Address: Dukes Meadow, Millboard Rd, Bourne End, Buckinghamshire, SL8 5XF

Warranty
For the complete Zebra hardware product warranty statement, go to: zebra.com/warranty.
Service Information
Before you use the unit, it must be configured to operate in your facility’s network and run your applications. If you have a problem running your unit or using your equipment, contact your facility’s Technical or System Support. If there is a problem with the equipment, they will contact Zebra support at zebra.com/support. For the latest version of the guide go to: zebra.com/support.
Software Support
Zebra wants to ensure that customers have the latest entitled software at the time of device purchase in order to keep the device operating at peak performance levels. To confirm that your Zebra device has the latest entitled software available at the time of purchase, go to zebra.com/support. Check for the latest software from Support > Products, or search for the device and select Support > Software Downloads. If your device does not have the latest entitled software as of your device purchase date, e-mail Zebra at entitlementservices@zebra.com and ensure you include the following essential device information: · Model number · Serial number · Proof of purchase · Title of the software download you are requesting. If it is determined by Zebra that your device is entitled to the latest version of software, as of the date you purchased your device, you will receive an e-mail containing a link directing you to a Zebra Web site to download the appropriate software.
Product Support Information
· For information on using this product, see the User Guide at zebra.com/mc3450-info. · To find quick answers to known product behaviors, access our knowledge articles at
supportcommunity.zebra.com/s/knowledge-base. · Ask your questions in our Support community at supportcommunity.zebra.com. · Download product manuals, drivers, software, and view how-to videos at zebra.com/support. · To request a repair for your product, go to zebra.com/repair.
Patent Information
To view Zebra patents, go to ip.zebra.com.
13

Documents / Resources

ZEBRA MC3450 Series Mobile Computer [pdf] User Guide
MC3450 Series Mobile Computer, MC3450 Series, Mobile Computer, Computer

References

User Manual

ZEBRA MC3450 Series Mobile Computer User Guide

MC3450 Series Mobile Computer

Specifications:

Product Usage Instructions:

Regulatory Information:

Regulatory Markings: