Topwise T1 Android Smart Mobile POS

Product Information

Specifications:

• Compliance: Part 15 of the FCC Rules
• Conditions:
  1. The device may not cause harmful interference
  2. The device must accept any interference received, including that causing undesired operation
• Specific Absorption Rate (SAR) information available

Product Usage Instructions

• Important Note:
  Any changes or modifications not approved by the responsible party may void the user’s authority over the equipment.
• Compliance:
  This device complies with Part 15 of the FCC Rules. Ensure proper compliance with regulations while using the product.
• Interference Conditions:
  Operation is subject to two conditions: The device should not cause harmful interference and must accept any interference received, even if it causes undesired operation.
• Specific Absorption Rate (SAR):
  Refer to the SAR information provided for details on the specific absorption rate related to this device.

Frequently Asked Questions (FAQ):

• Q: What should I do if I encounter interference while using the device?
  A: If you experience interference, ensure the device is placed in an optimal location and away from potential sources of interference. Contact customer support if issues persist.
• Q: Where can I find the Specific Absorption Rate (SAR) information for this device?
  A: The SAR information is available in the product documentation. Please refer to the provided materials for detailed SAR data.

Contents Checklist

• Please check the box contents after unpacking.
• If any components are missing, please contact the dealer.

FCC STATEMENT

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received. including interference that may cause undesired operation.

Specific Absorption Rate (SAR) information
SAR tests are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. Before a new device is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the exposure limit established by the FCC, tests for each device are performed in positions and locations as required by the FCC.

For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal and that positions the device a minimum of 10mm from the body. Non-compliance with the above restrictions may result in a violation of RF exposure guidelines.

Usage And Security Tips

Waterproof Tips

• Please keep the device turned off before wiping it clean.
• Do not use corrosive liquids for cleaning.
• Do not immerse the device in water or liquid.
• Do not spray water or cleaner into the Card Reader or Keypad.

Lithium Battery Safety Tips

• Improper handling of batteries can result in explosion and fire.
• Please use the adapter provided with the product to charge the lithium battery.
• Do not immerse the lithium battery in water liquid or fire.
• Do not pierce hit or squeeze the lithium battery with sharp or hard objects.
• Please charge the lithium battery regularly, it is recommended to charge the battery every 3-6 months to avoid shortening the battery life.
• If the battery is deformed (eg, bulged) or damaged, and if the battery leaks or emits an odor, remove it immediately and replace it at the same time.
• It is recommended to replace the battery every 2-3 years.
• Do not dispose of used batteries indiscriminately, it should comply with local laws, regulations, or directives.

Specification

• OS Android 11
• Processor
  • AP: Quad-Core Cortex A53 1.5GHz
  • SP: RISC Core (ARMv7 – M )
• Memory 2GB RAM + 16GB Flash
• Display
  • 5.5″ HD 1280*720 IPS
  • Capacitive Multi-Touch Screen
• Printer Print Speed: 80mm/s | Paper Roll: 58*40mm
• Top Camera 5 MP AF Rear – Facing | 2 MP FF Front – Facing
• Physical Key Power × 1 | Function × 1
• Card Readers Chip & PIN | NFC Contactless | Magnetic Stripe
• Mobile Network 4G: LTE | 3G: WCDMA | 2G: GPRS/GSM
• Wireless WiFi 2.4GHz/5GHz | Bluetooth 4.2 (BLE)
• Card Slots TF Card x 1 | SIM x2 + PSAM x 1 or SIM x 1 + PSAM x 2
• Audio Speaker × 1
• Positioning GPS / GLONASS / BEIDOU
• Indicator LEDs Red / Blue / Yellow / Green / Charging Led
• Fingerprint(optional) Semi-conducting Capacitive | FBI Certified
• Port USB Type-C × 1
• Power Battery: 3.8V / 5000mAh | Adapter: 5V / 2A
• Accessory (optional)
  • Base: Charge/Charge & USB/Charge & BT/Charge & LAN & USB
  • Other: Silicone Case/Leather Case/Holder
• Physical 194.7*80*25.6mm | 428g ( including battery )

Product Overview

1. Printer
2. Camera
3. Type-C
4. NFC reader area
5. MSR card slot
6. Function key
7. Power key
8. ICCR card slot

Usage

Made in China.

Documents / Resources

Topwise T1 Android Smart Mobile POS [pdf] User Manual 2BBKD-T1, 2BBKDT1, T1 Android Smart Mobile POS, T1, Android Smart Mobile POS, Smart Mobile POS, Mobile POS, POS

References

• User Manual