Temperature & Humidity
Sensor Parameter
User Start Guide
WL-TH6R Temperature Humidity Sensor Parameter
Warnings
- This product is NOT a toy. Please keep children away from this product.
- This product is designed for indoor use only. Do NOT use in humid environments or outdoors.
- Beware of moisture, do NOT spill water or other liquids onto the product.
- Do NOT attempt to repair this product by yourself. All repairs should be performed by an authorized professional.
- This product is only suitable for improving the entertainment, convenience of your home life and reminding you about the device status. It should NOT be used as security equipment for home, building, warehouse or any other places. If a user violates the product use instructions, the manufacturer will NOT be liable for any risks and property losses.
Packing List
Product Introduction
Specification
Temperature & Humidity Sensor Parameter
| Battery type | 1.5V DC (2*AAA) |
| Temperature detection range | -20°C ~ 60°C/(4°F~140°F) |
| Humidity detection range | 0%-99% RH |
| Wireless distance | ≤100m (open area) |
| Wireless protocol | 433 MHz RF |
| Max transmit power | 13dBm |
| Temperature accuracy | ±0.3°C/± 0.54°F |
| Humidity accuracy | ±3% RH |
| Weight | 19.5g |
| Size (H*W*D) | 72*25*20 mm |
Installation Method
* To ensure stable wireless communication, please avoid installing on metal surfaces.
Extra Sensors: Use adhesive to stick the sensor to the wall, or use a lanyard to hang the sensor in an appropriate position.
* Please ensure that the surface of the attachment location is clean and dry.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuming the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio TV technician for help.
FCC Radiation Exposure statement
The device has been evaluatec to meel general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Power a Sustainable and Smart Life
Only suitable for safe use in non-tropical climates
Documents / Resources
 |
SHENZHEN WL-TH6R Temperature Humidity Sensor Parameter [pdf] User Guide 2A2X7-WL-TH6R, 2A2X7WLTH6R, wl th6r, WL-TH6R Temperature Humidity Sensor Parameter, WL-TH6R, Temperature Humidity Sensor Parameter, Humidity Sensor Parameter, Sensor Parameter, Parameter |