300W Single Output with PFC Function
HSP-300 series
https://www.meanwell.com/Upload/PDF/Enclosed_Type_EN.pdf
Features:
- Universal AC input / Full range
- Withstand 300VAC surge input for 5 seconds
- Built-in active PFC function
- Low leakage current<imA
- Protections: Short circuit / Overload / Over voltage / Over temperature
- Cooling by free air convection
- Low profile:31mm
- Conformal coated
- LED indicator for power on
- Suitable for high efficiency moving sign applications
- 3 years warranty
GTIN CODE
MW Search: https://www.meanwell.com/serviceGTIN.aspx
SPECIFICATION
| MODEL | HSP-300-2.8 | HSP-300-4.2 | HSP-300.5 | |
| OUTPUT | DC VOLTAGE | 2.8V | 4.2V | 5V |
| RATED CURRENT | 60A | 60A | 60A | |
| CURRENT RANGE Note.5 | 0 – 60A | 0 – 60A | 0 – 60A | |
| RATED POWER(convection) | 168W | 252W | 300W | |
| RIPPLE & NOISE (max.) Note.2 | 110mVp-p | 150mVp-p | 150mVp-p | |
| VOLTAGE ADJ. RANGE | 2.5-3V | 3.6-4.4V | 4.5-5.5V | |
| VOLTAGE TOLERANCE Note.3 | ±2.0% | ±2.0% | ±2.0% | |
| LINE REGULATION | ±0.5% | ±0.5% | ±0.5% | |
| LOAD REGULATION | ±1.0% | ±1.0% | ±1.0% | |
| SETUP, RISE TIME | 2000ms, 100ms/230VAC 3000ms, 100ms/115VAC at full load | |||
| HOLD UP TIME (Typ.) | 8ms/230VAC 8ms/115VAC at full load | |||
| INPUT | VOLTAGE RANGE Note.4 | 180 – 264VAC 254 – 370VDC or 90-135VAC 127-190VDC | ||
| FREQUENCY RANGE | 47 – 63Hz | |||
| POWER FACTOR (Typ.) | PF:-0.93/230VAC PF .1.-0.98/115VAC at full load | |||
| EFFICIENCY (Typ.) | 80% | 85% | 87% | |
| AC CURRENT (Typ.) | 2.8A/115VAC 1.4A/230VAC | 3.9A/115VAC 1.95A/230VAC | 4.7A/115VAC 2.35A/230VAC | |
| INRUSH CURRENT (Typ.) | Cold start 30A/115VAC 60A/230VAC | |||
| LEAKAGE CURRENT | <1mA/ 240VAC | |||
| PROTECTION | OVERLOAD | 105-150% rated output power | ||
| Protection type : Hiccup mode, recovers automatically after fault condition is removed | ||||
| SHORT CIRCUIT | Protection type : Hiccup mode, recovers automatically after fault condition is removed | |||
| OVER VOLTAGE | 3.22 – 3.78V | 14.6 – 5.4V 15.7 | – 7.0V | |
| Protection type : Shut down olp voltage, re power on to recover | ||||
| OVER TEMPERATURE | Shut down o/p voltage, recovers automatically after fault condition is removed | |||
| ENVIRONMENT | WORKING TEMP. | -30 – +70-C (Refer to “Derating Curve) | ||
| WORKING HUMIDITY | 20 -90% RH non-condensing | |||
| STORAGE TEMP., HUMIDITY | -40 – +85 C, 10 – 95% RH | |||
| TEMP. COEFFICIENT | 10.03%/C (0 – 60 C ) | |||
| VIBRATION | 10 – 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes | |||
| SAFETY & EMC (Note 5) |
SAFETY STANDARDS | UL60950-1,IEC62368-1,GB 4943.1,EAC TP TC 004,TUV BS EN/EN 62368-1 approved | ||
| WITHSTAND VOLTAGE | I/P-0/P:3.0KVAC I/P-FG:2.0KVAC 0/P-FG:0.5KVAC | |||
| ISOLATION RESISTANCE | I/P-0/P, I/P-FG, 0/P-FG:100M Ohms/500VDC/25 C170%RH | |||
| EMC EMISSION | Compliance to BS EN/EN55032 (CISPR32),GB17625.1,GB/T 9254.1,Class B, BS EN/EN61000-3-2,-3, EAC TP TC 020 | |||
| EMC IMMUNITY | Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11;BS EN/EN55035, light industry level (surge 4KV), EAC TP TC 020 | |||
| OTHERS | MTBF | 1277.1K hrs min. Telcordia SR-332(Bellcore) ;148.2K hrs min. MIL-HDBK-217F (25°C) | ||
| DIMENSION | 210’81’31mm (L’W’H) | |||
| PACKING | 0.8kg; 15pcs/ 12.1kg/ 0.7CUFT | |||
| NOTE | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltages. Please check the static characteristics for more details. 5. Please refer to “Static Characteristics”. 6. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on A450mm* 450mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf) ※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx |
|||
Mechanical Specification
CASE NO.: 233B Unit:mm Tolerance:±1
AC Input Terminal(TB1) pin NO. Assignment
| Pin No. | Assignment | Terminal |
| 1 | AC/L | DG28C-B-03P-13-00AH |
| 2 | AC/N | |
| 3 |  |
DC Output Terminal pin NO. Assignment
| Pin No. | Assignment | Terminal |
| 1,2 | +V | NEL-400-02P |
| 3,4 | -V |
Block Diagram
Derating Curve
Static Characteristics
Installation
- Operate with additional aluminum plate
In order to meet the“Derating Curve”and the “Static Characteristics” ,HSP-300 series must be installed onto an aluminum plate(or the cabinet of the same size) on the bottom.The size of the suggested aluminum plate is shown as below. And for optimizing thermal performance, the aluminum plate must have an even and smooth surface (or coated with thermal grease), and HSP-300 series must be firmly mounted at the center of the aluminum plate.
- For heat dissipation, at least 5cm installation distance around the PSU should be kept, shown as below:
File Name:HSP-300-SPEC 2024-10-16
Downloaded from Arrow.com.
Documents / Resources
 |
MEAN WELL HSP-300 Series 300W Single Output with PFC Function [pdf] Owner's Manual HSP-300-2.8, HSP-300-4.2, HSP-300-5, HSP-300 Series 300W Single Output with PFC Function, HSP-300 Series, 300W Single Output with PFC Function, Single Output with PFC Function, PFC Function |