1800EF-4G High Availability Networking Via Fiber Router
“
Specifications:
- Model: LANCOM 1800EF-4G
- Antenna Connectors: LTE/4G
- Interfaces: Ethernet, WAN, SFP, USB, Serial USB-C
- Power Supply: Supplied power adapter
- Additional Features: Micro SIM card slot
Product Usage Instructions:
Mounting & Connecting:
LANCOM 1800EF-4G
LTE/4G Antenna Connectors: Screw the supplied mobile
radio antennas to the appropriate connectors. Ensure the device is
switched off when attaching or replacing antennas.
Micro SIM Card Slot: Slide the SIM card into the slot
with the marker facing the right way. The SIM card should click
into place. Only insert or remove the SIM card when the device is
switched off.
Ethernet Interfaces: Use the cable with kiwi-colored
connectors to connect ETH 1 to ETH 4 to your PC or LAN switch.
WAN Interface: Use the cable with green connectors to
connect the WAN interface to your WAN modem.
SFP Interface: Insert a suitable LANCOM SFP module into
the SFP port and connect it with a compatible cable following the
module’s mounting instructions.
USB Interface: Connect a USB data medium or printer to
the USB interface using a compatible cable (not supplied).
Serial USB-C Configuration Interface: Use a USB-C cable
for optional configuration of the device on the serial console
(cable not included).
Power Supply Connection Socket: Use only the supplied
power adapter and ensure proper installation as per the enclosed
guide.
Setting Up:
Please observe the following when setting up the
device:
- Use self-adhesive rubber pads if setting up on a table.
- Avoid placing objects on top of the device or stacking multiple
devices. - Keep all ventilation slots clear of obstruction.
Rack Installation:
Rack installation is possible with the optional LANCOM Rack
Mount/Rack Mount Plus (sold separately).
FAQ:
Q: Can I replace the antennas while the device is switched
on?
A: No, antennas may only be attached or replaced when the device
is switched off to avoid damaging the 4G modules.
Q: What should I do if the SIM card does not click into
place?
A: Ensure you are inserting the SIM card in the correct
orientation and try again. Do not force it into place.
Q: Can I use third-party accessories with this device?
A: No, support for third-party accessories is not provided.
Please use only recommended accessories.
“`
0624
owners. This document contains statements relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for technical errors and/or
LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their
Mounting & connecting
Hardware Quick Reference
LANCOM 1800EF-4G
LTE- / 4G antenna connectors Screw the supplied mobile radio antennas to the appropriate connectors.
Antennas may only be attached or replaced when the device is switched
off. Mounting or dismounting while the device is switched on may
destroy the 4G modules!
Micro SIM card slot Slide the SIM card into the SIM card slot using the marker to ensure that
the card is the right way round. Ensure that the SIM card clicks into place
on insertion.
To remove the card from the device, press the card lightly into the
device. Let go to release the SIM card from the slot.
The SIM card may only be inserted or removed when the device is switched off. Inserting or removing while the device is switched on may destroy the 4G modules!
Ethernet interfaces Use the cable with the kiwi-colored connectors to connect one of the
interfaces ETH 1 to ETH 4 to your PC or a LAN switch.
WAN interface Use the cable with the green connectors to connect the WAN interface
to your WAN modem.
SFP interface Insert a suitable LANCOM SFP module (e.g. 1000Base-SX or
1000Base-LX) into the SFP port. Choose a cable compatible with the
SFP module and connect it as described in the SFP module’s mounting
instructions www.lancom-systems.com/SFP-module-MI.
SFP module and cable to be connected to it are not included.
USB interface Connect a USB data medium or a USB printer to the USB interface.
(cable not supplied)
Serial USB-C configuration interface A USB-C cable can be used for optional configuration of the device on
the serial console. (cable not included)
Power supply connection socket Use only the supplied power adapter!
Before initial startup, please make sure to take notice of the information regarding the intended use in the enclosed installation guide!
Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times.
The power plug of the device must be freely accessible.
Please note that support for third-party accessories is not provided.
i
Please observe the following when setting up the device When setting up on the table, use the enclosed self-adhesive rubber pads, if applicable. Do not rest any objects on top of the device and do not stack multiple devices.
Keep all ventilation slots of the device clear of obstruction.
Rack installation with the optional LANCOM Rack Mount / Rack Mount Plus
(separately available)
omissions.
0624
owners. This document contains statements relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for technical errors and/or
LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their
LED description & technical details
Hardware Quick Reference
LANCOM 1800EF-4G
LANCOM 1800EF-4G
POWER ONLINE SFP WAN ETH 1 ETH 2 ETH 3 ETH 4 4G VPN
Power Off Green, permanently*
Red/green, blinking
Red, blinking Red, blinking slowly
1x green inverse blinking* 2x green inverse blinking* 3x green inverse blinking* Online Off Green, blinking
Green, permanently Red, permanently SFP Off
Red, permanently
Green, permanently
Green, blinking Red, blinking
Device switched off Device operational, resp. device paired / claimed and LANCOM Management Cloud (LMC) accessible Configuration password not set. Without a configuration password, the configuration data in the device is unprotected. Hardware error Time or charge limit reached/error message occurred Connection to the LMC active, pairing OK, device not claimed Pairing error, resp. LMC activation code not available LMC not accessible, resp. communication error
WAN connection inactive WAN connection is established (e.g. PPP negotiation) WAN connection active WAN connection error
SFP deactivated in the configuration or SFP module present, no connection to network device SFP enabled in the configuration but no SFP module present SFP module present, connection to network exists, no data transmission Data transmission SFP module present, hardware error
WAN
Off Orange, blinking Orange, permanently
Green, permanently Green, flickering Red/orange, blinking
Interface deactivated Synchronization with the modem
Synchronization with the modem successful WAN connection established WAN data transmission Hardware error, ext. modem
ETH1 – ETH4
Off Green, permanently Green, flickering
No link Network connection ready (link) Data transmission
4G
Off Green,permanently Green, flickering Orange, permanently Orange, blinking Red, permanently Red / green, blinking Red / orange, blinking
Cellular interface disabled Connection to cellular network active Cellular data transmission Logon to cellular network successful Logging on to cellular network Hardware error / module unavailable SIM card error (PIN) Uploading module firmware
VPN
Off Green, permanently Green, blinking
No VPN connection active VPN connection active Establishing VPN connection
Reset
Pressed up to 5 seconds
Pressed until first flashing up of all LEDs
device restart configuration reset and device restart
Hardware Power supply
Environment Housing Fan Interfaces WAN ETH USB SFP
4G
Configuration interface WAN protocols Ethernet Package content Cable Antennas Power adapter
12 V DC, external power adapter For an overview of the power supplies compatible with your device, see www.lancom-systems.com/kb/power-supplies. Temperature range 0 40 °C; humidity 0 95 %; non-condensing Robust synthetic housing, rear connectors, ready for wall mounting, Kensington lock; (W x H x D) 210 x 45 x 140 mm 1 quiet fan
10 / 100 / 1000 Mbps Gigabit Ethernet 4 individual 10 / 100 / 1000-Mbps Fast Ethernet ports; operate as switch ex-factory. Up to 3 ports can be switched as additional WAN ports. USB 2.0 Hi-Speed host port for connecting USB printers (USB print server), serial devices (COMport servers), or USB data media (FAT file system) Socket for small form-factor pluggable Gigabit-Ethernet transceiver (mini-GBIC). Compatible with optional LANCOM SFP modules for optical connections. Set as a LAN port ex-factory, can be configured as a WAN port.
2 SMA connectors for the supplied dipole rod antennas, compatible LANCOM AirLancer antennas for LTE, 4G, or from other manufacturers. Please respect the restrictions which apply in your country when setting up an antenna system (particularly antenna gain / transmission power). Serial USB-C configuration interface
PPPoE, Multi-PPPoE, PPTP (PAC or PNS) and IPoE (with or without DHCP)
1 Ethernet cable, 3m 2 LTE- / 4G antennas for 4G / LTE External power adapter
omissions.
*) The additional power LED statuses are displayed in 5-seconds rotation if the device is configured to be managed by the LANCOM Management Cloud.
This product contains separate open-source software components which are subject to their own licenses, in particular the General Public License (GPL). The license information for the device firmware (LCOS) is available on the device`s WEBconfig interface under “Extras > License information”. If the respective license demands, the source files for the corresponding software components will be made available on a download server upon request.
Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Wuerselen, declares that this device is in compliance with Directives 2014/30/EU, 2014/53/EU, 2014/35/EU, 2011/65/EU, and Regulation (EC) No. 1907/2006. The full text of the EU Declaration of Conformity is available at the following Internet address: www.lancom-systems.com/doc
Documents / Resources
 |
LANCOM SYSTEMS 1800EF-4G High Availability Networking Via Fiber Router [pdf] Owner's Manual 1800EF-4G, 1800EF-4G High Availability Networking Via Fiber Router, High Availability Networking Via Fiber Router, Availability Networking Via Fiber Router, Networking Via Fiber Router, Via Fiber Router, Fiber Router, Router |
