GANCUBE GANGES4 GAN 4×4 Speed Cubes Collections
Product Specifications
- Product Name: GANGES4
- Technology: GES+
- GTNs: Purple (1SN), Blue (2.1N), Green (2.5N), Yellow (3.4N)
- Elastic Forces: Vary based on GTN
Product Usage Instructions
GTNs and Elastic Forces:
Gan Pyraminx utilizes GES+ technology with 4 different numerical GTNs, each offering varying elastic forces:
- Purple GTN: 1SN
- Blue GTN: 2.1N
- Green GTN: 2.5N
- Yellow GTN: 3.4N
GTN Positions:
Each GTN has 2 positions that work together with the pointer at the end of the core. The positions are indicated as follows:
- 0.6/0.8: 2nter piece traindicato0.6 indicates tighthand1I while 0.8 indicates sehafeel
INSTALLATION INSTRUCTIONS
Open the corner tip from the edge with easy—opening cap.
- Change centre piece travel : Press the tension nut to the bottom and turn until reaching the desired position.
- Change GTNs : Turn the tension nut to Ø position, remove it and put in the new one.
Gan Pyraminx uses GES+ technology; there are 4 different numerical GTNs with different elastic forces. Each GTN has 2 positions that work together with the pointer at the end of the core,
Ø: GTNs in and out position
0.6/0.8: 2 center piece travel indicators, 0.6 indicates a tight handfeel while 0.8 indicates a loose handfeel
Follow GANCUBE on Instagram for more speedcubing info
Frequently Asked Questions
Q: How do I adjust the elastic force on my Gan Pyraminx?
A: To adjust the elastic force, rotate the GTNs to the desired position based on the numerical markings provided for each GTN.
Q: Where can I find more information about speedcubing using GANCUBE products?
A: Follow GANCUBE on Instagram for more speedcubing information and updates.
Documents / Resources
 |
GANCUBE GANGES4 GAN 4x4 Speed Cubes Collections [pdf] Instructions GANGES4, GANGES4 GAN 4x4 Speed Cubes Collections, GANGES4 GAN 4x4, Speed Cubes Collections, Cubes Collections, Collections |