EMKO ESM-4450 Process Controller Module System
Process Controller
ESM-4450 48 x 48 1/16 DIN Universal Input PID Process Controller with Smart I/O Module System
- 4 digits process (PV) and 4 digits process set (SV) display
- Universal process input (TC, RTD, mV
, V, mA) - Optional secondary sensor input
- – Dual or multi-point calibration for voltage / Current input
- – Configurable ON/OFF, P, PI, PD, and PID control forms
- Adaptation of PID coefficients to the system with Auto-tune and
Self-tune - Manual/Automatic mode selection for control outputs
- Bumpless transfer
- Smart I/O module system
- Programmable heating, cooling, and alarm functions for control outputs
- Motorized valve control function
- 8 steps profile control ( Ramp & Soak ) function and start-hold stop by using the logic input module
- Remote set point function by using analog input modules
- Retransmission of process value or process control by using 0/4…20 mACurrent Output Module
- Detection of heater failure by using 0…5A
CT input module - Hardware configuration by using input/output modules
- RS-232 (standard) or RS-485 (optional) serial communication with Modbus RTU protocol
Product Information
Specifications
- Model: ESM-4450
- Size: 48 x 48 mm
- Format: 1/16 DIN
- Input Type: Universal
- Features: PID Process Controller with Smart I/O Module System
Product Usage Instructions
Installation
- Ensure the power is switched off before installation.
- Mount the ESM-4450 unit securely in a suitable location.
- Connect the necessary input and output devices as per your process requirements.
Configuration
- Power on the ESM-4450 and access the configuration menu.
- Set the desired parameters such as setpoint, proportional band, and integral time.
- Save the configuration settings before exiting the menu.
Operation
- Monitor the process variables displayed on the ESM-4450 screen.
- Make adjustments to the controller settings if necessary to maintain optimal process control.
Frequently Asked Questions (FAQ)
Q: How do I reset the ESM-4450 to factory settings?
A: To reset to factory settings, navigate to the reset option in the configuration menu and confirm the reset action.
Q: Can the ESM-4450 be used in both temperature and pressure control applications?
A: Yes, the ESM-4450 with its universal input capability can be used for a wide range of control applications including temperature and pressure control.
Documents / Resources
 |
EMKO ESM-4450 Process Controller Module System [pdf] Instructions ESM-4450 Process Controller Module System, ESM-4450, Process Controller Module System, Controller Module System, Module System |
