EKSA Telecom H1 Telecom Trucker Bluetooth Headset with Microphone
Package Contents
- EKSAtelecom H1 Wireless
- Type-C Charging Cable
- Carry Pouch
- User Manual
Specifications
Bluetooth Version: 5.0
Effective Wireless Range: 30 m / 99 fl (Max 50 m I 164 fl without obstacles)
Music lime: ,,,57 hours (70% volume) Talk Time: ,,,30 hours (70% volume) Charging Time: “‘1.5 hours
Speaker Diameter: 40 mm
Impedance: 32 Q ± 15%
Sensitivity: 114 ± 3 dB
Frequency Response: 20 Hz – 20 kHz
Size: 2.7 mm* 1.85 mm
Sensitivity: -25 ± 1 dB
Frequency Response: 100 Hz – 10 kHz I
Impedance: 2.2 kQ Polar Pattern: Omnidirectional
Mic: EKSAtelecom Voice Pure Technology
Product Overview
Call Indicator
EKSA telecom Voice Pure Technology (ID = Type-C Charging Port
Volume+
Q Bluetooth Indicator
8 Multi-Function Button (MFB)
0 Volume –
Q Mic Mute Button
Charging Indicator
Operation Guide
Multi-Function Button
press for 3 seconds: Headphone on/off
Click: Play/Pause
Triple Click: Voice Assistant USiri
Volume Button
- Click: Volume+/ –
- Press for 2 seconds to C9 nexUprev1ous track
Mic Mute Button
- Click: Microphone on/off
Call Functions
Three-Way Calling
Redial
Audio Switching
Call Functions
Three-Way Calling
Bluetooth Pairing
- Turn on EKSAtelecom H1, until its Bluetooth indicator flashes alternately between red and blue, indicating that the headset is in pairing mode.
- Turn on the Bluetooth of your device, activate the search feature, and select “EKSA-H1”. After pairing, the Bluetooth indicator flashes slowly in blue light with a voice prompt “your headset is connected”, confirming a successful connection.
Note
- Keep the distance between the EKSAtelecom H1 and your device within 1 meter.
- If necessary, the pin code to complete pairing is “0000′
- While in pairing state, if a connection cannot be established within 1 O minutes, the headset will tum off automatically.
- When the headset is turned on again, it will connect to the last connected device automatically.
- Compatibility issues may arise when connecting directly to a computer via Bluetooth. Preferably with an adapter (not included).
To connect to a new device, turn off the Bluetooth of the currently paired device and follow the above steps to connect successfully to a new device.
Dual Pairing
- After successfully connecting the EKSAtelecom H1 to device A, turn off the Bluetooth of device A. The headset’s Bluetooth indicator flashes in red and blue alternately to signify pairing mode.
- Turn on the Bluetooth of device B, activate search mode, and connect to EKSA-H1″.
- Turn on the Bluetooth of device A to connect with “EKSA-H1”. This puts both devices A and Bin a simultaneous connection with “EKSA-H1”.
Documents / Resources
 |
EKSA Telecom H1 Telecom Trucker Bluetooth Headset with Microphone [pdf] User Manual H1 Telecom Trucker Bluetooth Headset with Microphone, H1, Telecom Trucker Bluetooth Headset with Microphone, Trucker Bluetooth Headset with Microphone, Bluetooth Headset with Microphone, Headset with Microphone, Microphone |
