Danfoss 12 Smart Logic Controlle

Product Specifications

• Compact design
• IP 20 protection
• Integrated RFI filters
• Automatic Energy Optimization (AEO)
• Automatic Motor Adaptation (AMA)
• 150% rated motor torque for 1 min
• Plug and play installation
• Smart Logic Controller
• Low operating costs

Product Usage Instructions

Installation and Setup

1. Ensure power to the unit is switched off before installation.
2. Mount the drive securely in the designated location with proper ventilation.
3. Connect power supply and motor according to the provided terminal connections.

Configuration

1. Use the LCD display and navigation buttons to configure settings.
2. Set up input and output parameters as needed based on your application requirements.

Operation

1. Power on the drive and monitor the display for any error messages.
2. Adjust settings using the potentiometer or LCD interface for optimal performance.

Maintenance

1. Regularly check for dust accumulation and clean the unit if necessary.
2. Ensure all connections are secure and free from corrosion.
3. Refer to the user manual for troubleshooting guidance in case of any issues.

Frequently Asked Questions (FAQ)

Q: What is the IP rating of the product?

A: The product features IP 20 protection for both the enclosure and cover.

Q: How many digital inputs are available?

A: There are 5 programmable digital inputs with PNP/NPN logic supported.

Q: Can the drive be used for various applications?

A: Yes, the compact design allows for versatile application across different industries.

 

Documents / Resources

Danfoss 12 Smart Logic Controller [pdf] User Guide 12 Smart Logic Controller, 12, Smart Logic Controller, Logic Controller, Controller

References

• User Manual