ANALOG DEVICE MA 01887 Remote Health Monitoring Mobile Application
Login process
- Log in for the first time
- Open the app.
- Enter your registration code.
- You can request your registration code by emailing RHMSupport@analog.com.
- Agree to the terms and conditions.
- Tap “Login” to continue.
- Tap “Profile” →”Account Details” →”Edit Profile” to set up your password.
- Login
- Enter your email and password.
- Click “Forget Password” to reset.
- Tap “Login” to continue.
App dashboard view
Blood Pressure Monitor
Prepare the blood pressure monitor
- Install batteries
- Open the lid from the back of the blood pressure monitor to install the four AA batteries required.
- Open the lid from the back of the blood pressure monitor to install the four AA batteries required.
- Connect the cuff to the monitor
- Connect the cuff to the left side of the monitor.
- Connect the cuff to the left side of the monitor.
Apply the cuff
- Place the cuff loop around the upper arm
- Place hand through cuff loop and place the cuff on the upper arm so that the bottom edge is 0.5″ (1 cm – 2 cm) above the elbow bend.
- Place hand through cuff loop and place the cuff on the upper arm so that the bottom edge is 0.5″ (1 cm – 2 cm) above the elbow bend.
- Wrap the cuff
- Ensure the air tube is pointing towards the inside of the arm and wrap the cuff securely but not too tight.
- Ensure the air tube is pointing towards the inside of the arm and wrap the cuff securely but not too tight.
- Make sure you are in the right posture
- In a comfortable chair with back support, sit with your feet flat and legs uncrossed.
- The arm with the cuff should be relaxed and placed on the table so that it is at the same level as your heart.
- Ensure air tube is placed on the inside of your arm.
Take a measurement
- Start the measurement
- Press the Start/Stop button on the monitor to begin a measurement.
- The measurement will take about 45 seconds.
- Take the measurement
- From the Dashboard View on the app, locate the Blood Pressure Monitor and tap “Take Measurement”.
- Then tap “Start Reading”.
- View measurement results
- Measurement will appear on the app.
- Tap “Close” when done.
Weight Scale
Prepare the weight scale
- Open the lid of the battery compartment
- Open the lid from the back of the weight scale.
- A hard object like a pen can be used.
- Install the batteries
- Install four AAA batteries and close the lid.
- Install four AAA batteries and close the lid.
- Set the measurement unit
- Press the
button to turn on the power.
- Press the
button to adjust. and press the
button to confirm.
- The default measurement unit is Ib & inch.
- You can set measurement unit to Ib & inch or kg & cm.
- Press the
Create a profile (First-time users only)
- Input profile information on the app
- Create a profile before taking your first measurement.
- Tap “Profile” → “Profile Details” to set up vour profile.
- Tap “Save” when done.
- Profile registration
- Press the Bluetooth® icon
on the weight scale to download the profile to the weight scale.
- Press the Bluetooth® icon
- Connect the scale with the App
- App will connect to the scale and download the profile.
- The scale will automatically turn off.
Take a measurement
- Prepare the weight scale
- Place the weight scale on a hard-level floor.
- Ensure the scale is OFF first and then press the ON/OFF button to turn on the weight scale.
- Press the SET button to select the user profile.
- Take the measurement
- Step on the weight scale with bare feet.
- Place the arches of your feet onto the center of the scale.
- Do not bend your knees during measurement.
- Once the scale makes a beeping sound, tap “View Measurement”.
- View measurement results
- Measurement will appear on the app.
- Tap “Close” when done.
Study Watch
Prepare the watch
- Wear the watch
- The watch should fit comfortably on your wristne it her too loose to slide down nor too tight to restrict blood flow.
- The watch should sit 1 to 2 fingers from the wrist bone with the arm relaxed.
- Turn on the watch
- Hold the navigation button until the watch turns on.
- Hold the navigation button until the watch turns on.
Take a measurement
- Start the measurement
- Keep arm still and relaxed during the measurement.
- From the dashboard view on the app, locate the Watch device and tap “Take Measurement”.
- Tap “Start Measurement”.
- Tap “Start Measurement”.
- Take the measurement
- Watch will connect to the app and start the measurement.
- Wait until the measurement is completed.
- View measurement results
- Measurement will appear on the app.
- Tap “Close” when done.
Access the latest version
- Scan the OR code
To access the latest version of this quick user guide, please scan this OR code with your mobile phone’s camera or visit analog.com/remote-patient.
Analog Devices Inc.
1 Analog Way
Wilmington MA 01887
Documents / Resources
![]() |
ANALOG DEVICE MA 01887 Remote Health Monitoring Mobile Application [pdf] User Guide MA 01887 Remote Health Monitoring Mobile Application, MA 01887, Remote Health Monitoring Mobile Application, Health Monitoring Mobile Application, Monitoring Mobile Application, Mobile Application, Application |