ALLEN HEATH IP1 Audio Source Selector and Remote Controller 

HEATH IP1 Audio Source Selector and Remote Controller

IP1 /EU

Fitting Note

The IP1 is part of the Allen & Heath IP series of remote controllers.
Symbol.pngLive requires firmware V1.60 or higher to work with IP1.
Symbol.pngThis product must be installed by a professional installer or qualified electrician.

Mounting the Remote Controller

This model fits standard UK wall boxes (BS 4662) and European wall boxes (DIN 49073) with a minimal depth of 30mm and Honeywell / MK Elements or compatible plates. Refer to the instructions of the face plate and/or wall box for screw specification and mounting.
HEATH IP1 Audio Source Selector and Remote Controller  Mounting the Remote Controller

Connection and configuration

The IP1 provides a Fast Ethernet, PoE compliant network port for connection to the mixing system.
Symbol.pngThe maximum cable length is 100m. Use STP (shielded twisted pair) CAT5 or higher cables.
The factory default network settings are as follows:

Unit NameIP1
DHCPOff
IP Address192.168.1.74
Subnet Mask255.255.255.0
Gateway192.168.1.254

When connecting multiple IP Remote Controllers to the same network, ensure each unit is set to a unique Name and IP Address beforehand.
Symbol.pngA jumper link on the main PCB board lets you reset the network settings to factory default. To reset, short the link for 10s whilst applying power to the unit.
Symbol.pngRefer to the IP1 Getting Started Guide available for download at www.allen-heath.com for more information on IP1 connections, settings and programming.

Front panel

HEATH IP1 Audio Source Selector and Remote Controller Front panel

Technical specs

NetworkFast Ethernet 100Mbps
PoE802.3af
Max power consumption2.5W
Operating Temperature Rang0deg C to 35deg C (32deg F to 95deg F)
Read the Safety Instructions Sheet included with the product before operating.
A limited one year manufacturer’s warranty applies to this product, the conditions of which can be found at:
www.allen-heath.com/legal
By using this Allen & Heath product and the software within it you agree to be bound by the terms of the relevant End
User Licence Agreement (EULA), a copy of which can be found at: www.allen-heath.com/legal
Register your product with Allen & Heath online at: http://www.allen-heath.com/support/register-product/
Check the Allen & Heath website for the latest documentation and software updates

Copyright © 2021 Allen & Heath. All rights reserved

ALLEN  logo.png

Documents / Resources

ALLEN HEATH IP1 Audio Source Selector and Remote Controller [pdf] Instruction Manual
IP1 Audio Source Selector and Remote Controller, IP1, Audio Source Selector and Remote Controller, Selector and Remote Controller, Remote Controller, Controller

References

Leave a comment

Your email address will not be published. Required fields are marked *