One moment, please...One moment, please...One moment, please...Product Support • Allen & Heath
Instruction Manual for ALLEN HEATH models including: IP1 Audio Source Selector and Remote Controller, IP1, Audio Source Selector and Remote Controller, Selector and Remote Controller, Remote Controller, Controller
ALLEN & HEATH IP1 WHITE < Τοπικοί Ρυθμιστές | DJShop
14 lug 2022 — 49073) with a minimal depth of 30mm and Honeywell / MK Elements or compatible plates. Refer to the instructions of the face plate and/or wall box for.
File Info : application/pdf, 2 Pages, 113.73KB
DocumentDocumentIP1 /EU Fitting Note The IP1 is part of the Allen & Heath IP series of remote controllers. dLive requires firmware V1.60 or higher to work with IP1. This product must be installed by a professional installer or qualified electrician. Mounting the Remote Controller This model fits standard UK wall boxes (BS 4662) and European wall boxes (DIN 49073) with a minimal depth of 30mm and Honeywell / MK Elements or compatible plates. Refer to the instructions of the face plate and/or wall box for screw specification and mounting. UK wall box Face plate EU wall box Face plate IP1 IP1 Connection and configuration The IP1 provides a Fast Ethernet, PoE compliant network port for connection to the mixing system. The maximum cable length is 100m. Use STP (shielded twisted pair) CAT5 or higher cables. The factory default network settings are as follows: IP1 /EU fitting note AP11270 Issue 3 Unit Name IP1 DHCP Off IP Address 192.168.1.74 Subnet Mask 255.255.255.0 Gateway 192.168.1.254 When connecting multiple IP Remote Controllers to the same network, ensure each unit is set to a unique Name and IP Address beforehand. A jumper link on the main PCB board lets you reset the network settings to factory default. To reset, short the link for 10s whilst applying power to the unit. Refer to the IP1 Getting Started Guide available for download at www.allen-heath.com for more information on IP1 connections, settings and programming. Front panel LCD Display Colour display providing information on the selected channel or output mix. It can also display a Source or Scene list when the rotary is pressed if such function is assigned to the IP1. Technical specs Network PoE Max power consumption Operating Temperature Range Rotary Encoder Assignable dual function rotary control. Push and turn to control its second function (momentary e.g. Pan) or push to enter Source Select or Scene Select function. Available functions include Input Level, Mix Level, DCA Level, Aux Send Level, FX Send Level, Matrix Send Level, Source Selector (Level + Source), Pan, Scene Select. Fast Ethernet 100Mbps 802.3af 2.5W 0 deg C to 35 deg C (32 deg F to 95 deg F) Read the Safety Instructions Sheet included with the product before operating. A limited one year manufacturer's warranty applies to this product, the conditions of which can be found at: www.allen-heath.com/legal By using this Allen & Heath product and the software within it you agree to be bound by the terms of the relevant End User Licence Agreement (EULA), a copy of which can be found at: www.allen-heath.com/legal Register your product with Allen & Heath online at: http://www.allen-heath.com/support/register-product/ Check the Allen & Heath website for the latest documentation and software updates. ALLEN&HEATH Copyright © 2021 Allen & Heath. All rights reserved