82599ES-Based Ethernet Network Interface Card
User Guide
PCIe 2.0/3.0/4.0
ETHERNET NETWORK ADAPTER
Product View
10G Network Adapter
25G/40G Network Adapter
100G Network AdapterE810CAM2-2CP 
E810CAM2-2CP
Package Contents
Pulling the Network Adapter Module Out
NOTE: Turn off the server and unplug the power cord before pulling the module from the server.
Inserting the Adapter into the Slot
Step I: Unfold Slot Cover
Step 2: Plugin Slot Carefully 
Step 3: Ensure the Adapter Stable
NOTE: Insert the adapter into the PCle slot corresponding to the server (eg: PCle X8).
Connecting the Cable
RJ-45 copper cable
10GBASE-T requires Cat6, Cat6a or Cat7 Cable
Fiber optical cable
Make sure that the connector is oriented correctly
NOTE: The fiber optic port contains a Class 1 laser device. Do not expose the port as this may result in skin or eye injury.
Installing the Windows Driver
First, turn on the computer, and when Windows discovers the new adapter, the “Found New Hardware Wizard” appears. Extract the update package from the CD to a specific path. Open a DOS command box and go to a specific path and type setup at the command prompt to extract the driver.
Checking the Status of the Indicator
| Indicator Light | State | Description |
| LNK (Green/Yellow) | Green light | Run at maximum port speed |
| Yellow light | Run at a lower port speed | |
| No light | No link | |
| ACT (Green) | Flashing green light | Data activity |
| No light | No link |
Product Warranty
FS ensures our customers that any damage or faulty items due to our workmanship, we will offer a free maintenance service.
Warranty: All Ethernet Network Interface Cards enjoy 3 years limited warranty against defects. materials or workmanship.
For more details about the warranty, please check at https://www.fs.com/policies/warranty.html
Return: If you want to return the item(s), information on how to return can be found at https://www.fs.com/policies/day_return_policy.html
Compliance Information
FCC
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment one and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment.
Responsible party (only for FCC matters)
FS.COM Inc.
380 Centerpoint Blvd, New Castle, DE 19720, United States
https://www.fs.com
FS.COM GmbH hereby declares that this device is in compliance with the Directive 2014/35/EU. A copy of the
EU Declaration of Conformity is available at www.fs.com/company/quality_control.html
FS.COM LIMITED
24F, Infore Center, No.19, Haitian 2nd Rd,
Binhai Community, Yuehai Street,Nanshan
District, Shenzhen City
FS.COM GmbH
NOVA Gewerbepark Building 7, Am
Gfild 7, 85375 Neufahrn bei Munich, Germany
Copyright © 2022 FS.COM All Rights Reserved.
Documents / Resources
 |
FS Intel 82599ES-Based Ethernet Network Interface Card [pdf] User Guide Intel 82599ES-Based Ethernet Network Interface Card, Intel 82599ES-Based, Ethernet Network Interface Card, JL82599ES-F2, X550AT2-T2, X710BM2-F2 |
