PCIe 2.0/3.0/4.0
ETHERNET NETWORK ADAPTER
Quick Start Guide

Product View

10G Network Adapter
25G/40G Network Adapter

100G Network Adapter

Package Contents

1 x low profile bracket	1 x full-height bracket	1 x software CD

Pulling the Network Adapter Module Out

NOTE: Turn off the server and unplug the power cord before pulling the module from the server.

Inserting the Adapter into the Slot

Step 1: Unfold Slot Cover

Step 2: Plug-in Slot Carefully

Step 3: Ensure the Adapter Stable

NOTE: Insert the adapter into the PCle slot corresponding to the server (eg: PCle X8).

Connecting the Cable

RJ-45 copper cable

10GBASE-T requires Cat6, Cat6a, or Cat7 Cable

Connect the Copper Cable	Dual Ports

Fiber optical cable

Make sure that the connector is oriented correctly

Connect the Fiber Cable	Single Port	Dual Ports	Quad Ports

NOTE: The fiber optic port contains a Class 1 laser device. Do not expose the port as this may result in skin or eye injury.

Installing the Windows Driver

First, turn on the computer, and when Windows discovers the new adapter, the “Found New Hardware Wizard” appears. Extract the update package from the CD to a specific path. Open a DOS command box and go to a specific path and type setup at the command prompt to extract the driver.

Checking the Status of the Indicator

Indicator Light	State	Description
LNK (Green/Yellow)	Greenlight	Run at maximum port speed
	Yellow light	Run at a lower port speed
	No light	No link
ACT (Green)	Flashing green light	Data activity
	No light	No link

Product Warranty

FS ensures our customers that any damage or faulty items due to our workmanship, we will offer a free maintenance service.

Warranty: All Ethernet Network Interface Cards enjoy 3 years limited warranty against defects in materials or workmanship. For more details about the warranty, please check at https://www.fs.com/policies/warranty.html 

Return: If you want to return the item(s), information on how to return can be found at https://www.fs.com/policies/day_return_policy.html

Compliance Information

FCC
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment and on,  the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment.
Responsible party (only for FCC matter)
FS.COM Inc.
380 Centerpoint Blvd, New Castle, DE 19720, United States https://www.fs.com

CE
FS.COM GmbH hereby declares that this device is in compliance with the Directive 2014/35/EU. A copy of the EU Declaration of Conformity is available at www.fs.com/company/quality_control.html

FS.COM LIMITED
24F, Infore Center, No.19, Haitian 2nd Rd,
Binhai Community, Yuehai Street,Nanshan
District, Shenzhen City
FS.COM GmbH
NOVA Gewerbepark Building 7, Am
Gfld 7, 85375 Neufahrn bei Munich, GermanyQ.C. PASSED
Copyright © 2022 FS.COM All Rights Reserved.

Documents / Resources

FS E810-CAM2 Ethernet Network Adapter [pdf] User Guide E810-CAM2, Ethernet Network Adapter, E810-CAM2 Ethernet Network Adapter, Network Adapter, Adapter

References

• User Manual