FIRMWARE INSTALLATION INSTRUCTIONS
RAZER VIPER FIRMWARE UPDATER GUIDE

 

UPDATER INFORMATION

APPLICABLE MODEL NUMBERS

• RZ01-02550

DRIVER NAME AND VERSION
Viper_Mouse_FirmwareUpdater_v1.07.01 _r1

Download the firmware updater here: http://rzr.to/PrIDN

RELEASE NOTES:

• Added a 28ms wait period after the first click to avoid accidental clicks.

PREPARATIONS

1. Make your laptop is plugged into a wall outlet and not just run on battery before
2. Save any open documents on your computer and close all other programs before attempting the update.
3. Download the firmware from the link above.
   Note: It is recommended to download and install the latest firmware version.
4. Run updater and follow the installation steps below:

INSTALLATION PROCESS

1. Run the updater as shown below:
   
2. You may be prompted to confirm changes on your device by the User Account Control. Click “Yes” to confirm these changes.
   
3.  Click “NEXT” to proceed. The installer will close all running Razer applications if you have not done so yet.
   
4. Connect the device to the computer and then click “UPDATE”.
   
5. Wait until the update process is complete. Do not interrupt.
   
6. When the update is complete, click “CLOSE”.
   

FOR GAMERS BY GAMERS.

Documents / Resources

RAZER Razer Viper Firmware Updater [pdf] Instruction Manual Razer, Viper, Firmware, Updater

References

• User Manual