Lavex Automatic Soap Dispenser User Guide

Specifications:

• Brand: Lavex
• Product: Automatic Soap Dispenser
• Features: Sensor-operated, Battery-powered
• Color: White
• Material: Plastic
• Capacity: 400ml

Product Usage Instructions:

1. Battery Replacement:

When the light on the dispenser flashes red every 4 seconds, it
indicates low battery. Follow these steps to replace the
batteries:

• Turn off the dispenser.
• Open the battery compartment.
• Remove the old batteries.
• Insert new batteries in the correct orientation.
• Close the compartment and turn on the dispenser.

2. Sensor Obstruction:

If the light flashes red every second, check for obstructions
near the sensor. Follow these steps:

• Ensure the dispenser is installed at least 1 foot above any
  surface.
• Clean the sensor area and remove any obstacles.
• Test the dispenser to ensure proper functioning.

3. Pump Seating:

If the light is not flashing red and the dispenser is not
working, check the pump seating:

• Refer to the images provided in the manual for correct and
  incorrect pump seating.
• Ensure the pump is fully seated in the dispenser for proper
  operation.

FAQ:

Q: How do I know if the batteries need replacement?

A: The red flashing light every 4 seconds indicates low battery
and the need for replacement.

Q: What should I do if the dispenser is not working even with
new batteries?

A: Check the pump seating and ensure it is correctly positioned
in the dispenser as shown in the manual.

Q: Why is the sensor not detecting my hand for dispensing?

A: Make sure there are no obstructions near the sensor and clean
the sensor area to improve detection.