LARQ PureVis 2 Advanced Bottle Filter
Product Specifications
- Nano Zero technology for improved taste and removal of contaminants
- Meets NSF/ANSI 42 & 53 standards
- Removes lead, PFOA/PFOS, chlorine, and other contaminants
- Long-lasting filters with up to 2 months of use
Product Usage Instructions
- Remove the filter from the filter pod and dispose of the outer packaging.
- Rinse the filter under running water for 10 seconds (make sure it’s soaked).
- Push the straw into the cap base until it’s secure.
- Install the filter (tip facing down), and screw the pod cap on securely.
- Fill the bottle with cold or room temperature tap water and screw on the cap.
- Sip and enjoy clean, filtered water!
FAQ
- Q: How long does the filter last?
- A: The filter lasts up to 2 months with regular use.
- Q: What contaminants does the filter remove?
- A: The filter removes lead, PFOA/PFOS, chlorine, and other unwanted contaminants.
- Q: Can I wash the filter?
- A: Do not wash the filter at any time. Simply rinse it under running water for maintenance.
Introduction
LARQ Bottle Filter Advanced
- Nano Zero technology improves taste for a smooth finish and removes contaminants such as PFOA/PFOS and chlorine that meet NSF/ANSI 42 & 53 standards.
- Improves water quality and taste by removing lead, PFOA/PFOS, chlorine, and other unwanted contaminants.
- Long-lasting filters. Up to 2 months of use.
Getting started
- Remove the filter from the filter pod and dispose of the outer packaging
- Rinse the filter under running water for 10 seconds (make sure it’s soaked).
- Push the straw into the cap base until it’s secure.
- Install the filter (tip facing down), and screw the pod cap on securely.
- Fill the bottle with cold or room temperature tap water and screw on the cap.
- Sip and enjoy clean, filtered water!
You may notice some black carbon dust in the water on your first use or after a prolonged period of not using the LARQ Pitcher PureVis. This is harmless carbon from our plant-based filter media. If desired, simply run a batch through the filter and pour out.
Warranty
- We offer a 1-year limited warranty to repair or replace any defective material or component.
- It does not cover any issues due to normal wear and tear, misuse, or gulations_stlpulate).
Safety first
You may notice some black carbon dust in the water on your first use or after a prolonged period of not using the I-ARQ Pitcher PureVis. This is harmless carbon from our plant-based filter media. If desired, simply run a batch through the filter and pour out.
- Do not use it with hot water.
- Do not use to filter anything other than water. Do not use carbonated water.
- Do not place the filter in the dishwasher.
- Do not place the bottle in the microwave or freezer.
- Filter is intended to be used with potable (municipal tap) water only.
- Do not use water that is microbiology unsafe or of unknown quality without adequate disinfection before and after filtration.
- Do not cut open or perforate the filter.
- Do not wash the filter at any time.
Warning: Plastic bags can be dangerous. To avoid the danger of suffocation, keep this bag away from babies and children.
We’re here to help
- Register for our warranty program at livelarq.com/register and you’ll also receive special offers and expedited service.
- Have questions about the LARQ products?
- Head over to livelarq.com/support for FAQs or contact our customer support team at hello@livelarq.com.
Love LARQ?
- Us too. Share a photo of your LARQ product with us and we’ll post it!
- @livelarq #DrinkBrilliantly
Documents / Resources
 |
LARQ PureVis 2 Advanced Bottle Filter [pdf] User Manual PureVis 2, PureVis 2 Advanced Bottle Filter, Advanced Bottle Filter, Bottle Filter, Filter |
