LARQ Filter Straw User Manual

LARQ Filter Straw

Contents hide

8 Documents / Resources

8.1 References

9 Related Posts

LARQ Filter Straw

A revolutionary portable water filtration system that combines a high-performance Nano Zero filter with a seamless, low-pressure drinking experience. The Nano Zero filter technology improves taste for a smooth finish and removes chlorine, and PFAS (PFOA/PFOS).

How to use

Remove filter from the filter pod and dispose of the outer packaging.
There will be 4 straws in the box and 2 adaptors, select one that is right for your Bottle.

Rinse the filter under running water for 10 seconds (make sure it’s soaked).
Wet the straw with water. Take the straw (the ridge of the straw should be
facing down) and push it through the silicone stopper until it stops. As you push,
hold on to the stopper to prevent it from coming out of the pod.

Push the straw into the cap base until it’s secure. If you have the LARQ Bottle Swig Top, use the silicone adapter and attach it to the straw before securing it to the cap.
Install the filter (tip facing down), and screw the pod cap on securely.

Fill the bottle with cold or room temperature tap water and screw on the cap.
Enjoy brilliantly filtered water anytime, anywhere.

Compatible with

LARQ Bottle Flip Top
LARQ Bottle Swig To%

LARQ Bottle Pure Vis™ 2

Warranty

We offer a 1-year limited warranty to repair or replace any defective material or component. It does not cover any issues due to normal wear and tear, misuse, or loss/theft of the product. (2-year warranty where local regulations stipulate).

Safety first!

Do not use with hot water.
Do not use to filter anything other than water. Do not use with carbonated water. Do not place the filter in the dishwasher.

Do not place the bottle in the microwave or freezer.
Filter is intended to be used with potable (municipal tap) water only. Do not use with water that is microbiology unsafe or of unknown quality without adequate disinfection before and after filtration.