LANCOM SYSTEMS 1800EFW-5G Business Router

Specifications

• Model: LANCOM 1800EFW-5G
• Antenna: 5G mobile radio antennas
• Power Supply: Power adapter included
• Interface: WAN interfaces (SFP / TP combo port), Ethernet interfaces, USB interface, Micro SIM card slot, Serial USB-C configuration interface
• LED Indicator: Power – Blue (Off, 1x blue blinking, 2x blue blinking, 3x blue blinking)
• Trademark: LANCOM, LANCOM Systems, LCOS, LAN community, Hyper Integration

Product Usage Instructions

• 5G Antenna Connectors: Screw the supplied mobile radio antennas to the appropriate connectors.
• Power Supply Connection: Use only the supplied power adapter.
• Reset Button: Short press for device restart, long press for device reset.
• Micro SIM Card Slot: Slide the SIM card into the slot ensuring it clicks into place. To remove, lightly press and release the card.
• Serial USB-C Configuration Interface: Use a USB-C cable for optional configuration.
• WAN Interfaces (SFP / TP Combo Port): Insert a LANCOM SFP module into the WAN SFP interface or connect WAN TP interface to a WAN modem using an Ethernet cable.
• Ethernet Interfaces: Connect ETH 1 to ETH 4 to your PC or LAN switch using an Ethernet cable.
• USB Interface: Connect a USB data medium or printer to the USB interface.

Important Notes

• Operate the device only with a professionally installed power supply at a nearby accessible power socket.
• The power plug must be freely accessible at all times.
• Avoid stacking multiple devices on top of each other.
• Keep ventilation slots clear of obstructions.

Rack Installation
Rack installation is possible with the optional LANCOM CPE blackline Rack Mount / CPE blackline Rack Mount Plus (sold separately).

FAQ

Q: What should I do if I encounter technical errors with the device?
A: Contact LANCOM Systems for technical support and assistance. Avoid attempting to repair the device on your own to prevent voiding any warranties.

Hardware Quick Reference
LANCOM 1800EFW-5G

1. 5G antenna connectors
   Screw the supplied mobile radio antennas to the appropriate connectors.
2. Power supply connection socket
   Use only the supplied power adapter!
3. Reset button
   Short press > device restart
   Long press > device reset
   RESET
4. Micro SIM card slot
   Slide the SIM card into the SIM card slot using the marker to ensure that the card is the right way round. Ensure that the SIM card clicks into place on insertion.
   To remove the card from the device, press the card lightly into the device. Let go to release the SIM card from the slot.
5. Serial USB-C configuration interface
   A USB-C cable can be used to optionally configure the device on the serial console. (cable not included)
6. WAN interfaces (SFP / TP combo port)
   Insert a suitable LANCOM SFP module (e.g. 1000Base-SX or 1000Base-LX) into the WAN SFP interface. Choose a cable compatible with the SFP module and connect it as described in the SFP module’s mounting instructions www.lancom-systems.com/SFP-module-MI.
   (SFP module and cable are not included)
   If desired, alternatively connect the WAN TP interface to a WAN modem using an Ethernet cable.
7. Ethernet interfaces
   Use an Ethernet cable to connect one of the interfaces ETH 1 to ETH 4 to your PC or a LAN switch.
8. USB interface
   Connect a USB data medium or a USB printer to the USB interface.(cable not supplied)

 

• Before initial startup, please make sure to take notice of the information regarding the intended use in the enclosed installation guide!
• Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times.
• The power plug of the device must be freely accessible.
• Please note that support for third-party accessories is not provided.

Please observe the following when setting up the device

• When setting up on the table, use the enclosed self-adhesive rubber pads, if applicable.
• Do not rest any objects on top of the device and do not stack multiple devices.
• Keep all ventilation slots of the device clear of obstruction.
• Rack installation with the optional LANCOM CPE blackline Rack Mount / CPE blackline Rack Mount Plus (separately available)

LED description & technical details

Hardware

The additional power LED statuses are displayed in a 5-seconds rotation if the device is configured to be managed by the LANCOM Management Cloud.
This product contains separate open-source software components which are subject to their own licenses, in particular the General Public License (GPL). The license information for the device firmware (LCOS) is available on the device‘s WEBconfig interface under “Extras > License information“. If the respective license demands, the source files for the corresponding software components will be made available on a download server upon request.
Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Wuerselen, declares that this device is in compliance with Directives 2014/30/EU, 2014/53/EU, 2014/35/EU, 2011/65/EU, and Regulation (EC) No. 1907/2006. The full text of the EU Declaration of Conformity is available at the following Internet address: www.lancom-systems.com/doc

Documents / Resources

LANCOM SYSTEMS 1800EFW-5G Business Router [pdf] Installation Guide 1800EFW-5G Business Router, 1800EFW-5G, Business Router, Router

References

• User Manual