LAMTTO C300 Channel Dash Cam Front and Rear Inside
Important Notice
- This product is intended for using in motor vehicles only.
- Do NOT install the camera where it might block the driver’s view of road (including the mirrors) or the deployment of the airbag.
- Before using this device, please insert the memory card first, and need to format micro SD card to FAT32 format on PC firstly, then format the memory card in camera menu.
- This camera records video at high resolution. Be sure to use high speed Micro SD card.
- Class 10 or above 16 GB or 32 GB Micro SD card is recommended.
- For safety reasons, this camera has a small built-in battery, which is used to save the video 1ile after external power supply cuts off (car turns off). •Be sure the camera lens is clean and there is nothing blocking the lens.
- DO NOT leave the camera in direct sunlight for a long period of time or where the temperature could go above 140°F(60°C).
- Inside Lens
- Front Lens
- MIC
- Screen
- Mini USB
- Power in
- Mount Socket
- Rear Cam
- Interface
- Down
- Menu
- UP
- OK
- Power
- Reset
- Memory
- Card Slot
|
Power |
Long press to turn ON / OFF the camera |
|
OK |
In Standby/ Video / Photo Mode. Short press to start I
stop video recording or take a photo. In Setting Menu, short press to confirm selection and adjustment. In Playback, short press to select and play recorded files. |
|
UP |
In Setting Menu. Short press to select option and adjust values. In Playback, short press to select media files. In playback mode, long press to switch front, inside and rear media files. During video recording.short press to switch front.rear and inside camera display. During video recording, long press it to turn on/off IR night version. |
|
Menu/ Mode |
Please press OK button to pause recording firstly, short press to access the menu settings ,and then press once again to access System Setting Menu. In standby, Long press to switch mode between Video / Photo / Playback. During videc recording, short press it to lock/unlock the current videc clip. |
|
Down |
In Setting Menu. Short press to select option and adjust values.
In Playback, short press to select media ‘files. In playback mode, long press to switch front, inside and rear media ‘files. During video recording, short press to turn ON/OFF audio recording. During video recording, long press it to turn on/off Audio. |
Set up and Installation
- Before installation, please check the camera’s normal function, and make sure you are using a high speed Micro SD card (speed Class 10 or above),and format the card in the camera menu before recording.
- Use the suction cup mount to install the dash cam on the windshield. The recommended location is near the rearvew mirror facing front, adjust the lens angle for best coverage.
- Adjust the lens angle of the camera, make sure you get the best coverage over the hood and the road ahead, so you can record what happens.
- Connect the power to the camera and the cigarette lighter, hide the rest of the cable in the gap of the interior trim board.
Operating Mode
The dash cam operates in 3 modes: Video Recording Mode, Photo Mode and Playback Mode. These modes also have menu to help you configure recording and taking photos. Long press menu button to switch between different modes and access to the mode you want. Watch the icon on top left corner of the screen for each mode.
Video Recording Mode
The camera will automatically enter Video Recording Mode and start recording when connected to a car charger and power on. A Red dot flashing on the top left corner indicates recording is in progress. Press the OK to stop recording, or start recording again.
- Video Mode Icon
- Loop Recording
- Exposure
- G-Sensor
- Recording llme
- Resolution
- Parking Monitor
- LED Status
- Memory Card Status
- Power Status
- Audio Status
- llme & Date
Video Recording Menu
Cyclic Record: This function allows you to set video length to 1/3/5 minutes. Select a value to activate loop recording.so when storage is full.it will automatically overwrite the earliest video file.
Exposure: Adjust exposure value to adjust the brightness of the video.
Motion Detection: When the camera detects movement or dynamic changes in the picture, it will start recording.
Audio Record: Tum ON/OFF audio recording in video.
Gravity sensing: G-sensor will detect significant or sudden shock and movement.then automatically locks current file from loop recording.Low/Medium/High sensitivity are available.
Parking Guard: It’s used to protect your car after parking. With this function on, after you stop the car and the camera turns off, it stays standby. When camera detects shock and collision, it will automatically turn on and take a short video. then shut down automatically.
Car Number: On/Off the license plate display function to customize the license plate number
Photo Taking Mode
The camera can operate in Photo Taking Mode, and take HD photo up to 10 Mega pixels
To take a photo:
Simply power on the camera. Long press MENU to select Photo Mode, and Press OK to take photo . Like the Video Recording Mode, you can press the Menu button once to access the setting menu for Photo Mode, Press Menu twice to enter system setting menu.
Photo Mode Menu
Resolution: Set the photo resolution, Up to 10 Mega Pixels available.
Anti-Shaking: Turn ON/OFF image stabilization function.
Date Stamp: Enable/Disable the date and time marks in image files.
After choosing a recorded video or photo, press the Menu button once to access the setting menu for Playback Mode.
Delete: Delete the current file displayed or delete all files.
Protection: Lock/Unlock the current file displayed or Lock/ Unlock all files.
Press MENU button twice to access System Setting Menu in any mode. The TOOL icon is highlighted in the upper left corner.
Specification
| Image Sensor | High Resolution CMOS Sensor |
| Screen | 1.5 inch LCD Display |
|
Video Resolution |
Front:1920*10B0P Rear:1280*720P lnside:1280*720P |
| Video Format | MOV |
| Video Coding | H.264 |
| Video Mode | Normal / Loop Record |
| Picture Format | JPG |
| Photo Resolution | 10MP / BMP / 5MP/ect |
| Loop Recording | Supported |
| Power on recording | Supported |
| G-Sensor Lock | Supported |
| Language | Chinese/Japanese/English/act |
| Audio Recording | Built-in microphone, On/ Off optional |
| Storage | Micro SD Card (up to 128GB) |
| USB interface | MiniUSB |
| Operating System | Windows 7/10 or MAC |
| Internal Power | Built-in Li-ion Battery |
| External power supply |
DC 5V/2A |
FAQS
When press the menu button, why it’s not display the menu of the system?
Please press OK button to pause recording firstly.
The SD card gets full and it doesn’t overwrite?
Please check whether all video files are locked and cannot be overwritten, please format micro SD card and adjust sensitivity of G-sensor.
Suction mount cannot attach on windshield well?
Please clean the windscreen where attaching with a glass cleaning wipe. Removed the protective film, If it does not work, warming your windscreen then try it again.
Even though set the screen saver, butthe screen will randomly turn on?
The power supply might not be stable, please change another car charger to try.
Why dash cam drain car battery?
Please check whether the cigarette lighter still be on after you turn off car engine.
The dash cam will stop automatically while recording.
Check the memory card, there might be too many locked video that the loop recording won’t work right
The camera keeps starting and off
That could be the parking monitor function being triggered, check the setup menu.
If the video played on the computer is somehow not fluent or jammed.
Try to play the video with different video players, like: Potplayer or VL Cplayer.
There are stripes interference in the image.
That should be wrong lightfrequency. According to the local regulation, choose the appropriate frequency settings 50HZor60HZ.
Without external power supply, the camera only lasts very short time.or it just can’t turn on.
The built-in battery is low capacity for safety reasons, and the battery is used to save the video and parking monitor only. It is not designed to work without external power supply. So please keep a stable and continuous power supply when it is working.
Does the rear camera works for parking?
There is no parking aid line when parking the car.
How do I get the data from the micro sd to my computer?
You will need a SD card adapter. Most micro sd cards come with one.
Does the cab camera Record audio?
Yes it dose but the video quality is low and the cable is short and you won’t be able to install it in back sit to cover back side of the car which is important because most parking incidents happens from back side of the car
How to install this dash cam?
This dual dash cam is easy to install, it has a suction cup and adhesive mount, you can choose one you prefer to install the dash cam.
