lamidesk Super Speed Remote Control
USER MANUAL
UP/DOWN ROLLER
Simply touch button and roller will travel up and down.
JOGGING
In Continuous mode, the chosen axis will jog for as long as you hold the button down. The jogging speed is set by a potentiometer on the receiver.
AUTOMATIC
Three buttons used for setting and moving to set positions. The speed is set by a potentiometer on the driver box.
FAST JOGGING Switch to fast jogging. Using red/yellow buttons will then move the roller at full speed.
SLOW JOGGING Switch to slow jogging. Using red/yellow buttons will then move the roller at reduced speed.
ON Sequences of short and long touches will activate the receiver.
Blue LED on the receiver will illuminate
White LED on the receiver will illuminate if reciever is powered.
OFF Switch off just remote controller not driver box.
a Receiver has a magnetic holder, just click it on the frame.
b Driver has to be remote ready, ask us for it there is solution how to upgrade your box. Driver has two identical connectors CANON 15.
Connect remote controller to any. The other is for foot pedal.
Remote control and foot pedal can be connected and work together.
c UP/DOWN function connection
Documents / Resources
 |
lamidesk Super Speed Remote Control [pdf] User Manual Super Speed Remote Control, Super Speed, Remote Control, Control |