LAMAX CyberWave1 Bluetooth Speakers
BOX CONTENTS
1× LAMAX CyberWave1
1× USB-C power cable
1× 3.5 mm AUX cable
1× User Manual
1× Safety Instructions
DESCRIPTION AND CONTROLS
| 1 EQ | Switch equaliser modes |
| 2 LIGHTING | Switch light modes (press) |
| 3 POWER | Power on / off (hold for 2 seconds) Turn on voice assistant (press) |
| 4 PAIRING /TWS | Pairing (click) Turn on / off TWS mode (hold for 2 seconds) Reset (hold for 8 seconds) |
| 5 MODE (M)f | Switching music sources – Bluetooth, micro SD card, USB flash drive and AUX (press);0 |
| 6 – | Volume down (press) Previous track (hold for 2 seconds) |
7  |
Play / Pause (press) Answer / End call (press) Reject call (hold for 2 seconds) Dial last phone number (double press) |
| 8 + | Volume up (press) Next track (hold for 2 second |
| 9 BATTERY STATUS | LED indication of battery charge status |
| Other | |
| 10 USB-A port | |
| 11 AUX port | |
| 12 USB-C charging port | |
| 13 Micro SD card slot | |
SPEAKER CONTROL
Charging:
Fully charge the speaker battery before first use.
Only charge the speaker using the original power cable included.
- 4 LEDs on – battery is charged between 75% and 100%
- 3 LEDs on – battery is charged between 50% and 75%
- 2 LEDs on – battery is charged between 25% and 50%
- 1 LED flashing – battery is charged between 0% and 25%
On / Off:
Press and hold the POWER button to turn the speaker on or off.
Note: The speaker will automatically turn off after 30 minutes of inactivity, when the battery level is very low, or if an external device charges for 30 minutes.
Pairing:
- Turn on the speaker by holding the POWER button. It will auto-matically enter pairing mode.
- Activate Bluetooth on your device and select „LAMAX CyberWa-vfe1“ from the available devices.
TWS (True Wireless Stereo):
- Turn on both speakers, ensuring they are not paired with any device.
- Press the PAIRING button on the main speaker; its LED will flash white.
- If pairing is successful, the LED on the main speaker will flash white, while the other speaker‘s LED will turn white.
- Pair the main speaker with your device as per the Pairing instructions.
- The main speaker will act as the left channel; call functions can only be controlled through it.
- Press the PAIRING button on the main speaker to unpair the speakers.
Switching Music Sources:
Press the MODE (M) button to switch between sources:
- Bluetooth
- Micro SD card
- USB flash disk
- AUX
Note: The speaker will automatically switch to the appropriate mode when a micro SD card, USB flash drive, or 3.5 mm audio cable is connected.
Charging an External Device (Power Bank):
The speaker can be used as a power bank. Connect an external device via the USB-A port to start charging automatically. Maximum charging time is 30 minutes per connection.
SPECIFICATIONS
| Maximum power | 50 W |
| Wireless technology | Bluetooth 5.3 |
| Number of bands | 2 |
| Maximum pairing distance | 15 m |
| Supported formats | MP3, WAV, FLAC, AAC |
| Supported codecs | SBC |
| Inputs | Micro SD, USB-A, AUX |
| Battery capacity | 4000 mAh |
| Playback time (50% volume) | Up to 20 hours |
| Charging time | Up to 3 hours |
| Sensitivity | ≥ 102 dB |
| Frequency range | 50 Hz – 20 kHz |
| Features | LED lighting, TWS, Beat Bass technology |
| Water proof | IPX6 |
| Dimensions | 151 × 109 × 230 mm |
| Weight | 1,9 kg |
Printing errors reserved.
Documents / Resources
 |
LAMAX CyberWave1 Bluetooth Speakers [pdf] User Manual CyberWave1 Bluetooth Speakers, CyberWave1, Bluetooth Speakers, CyberWave1 Speakers |
