LABELMATE Epson C60 Rewinder Alignment Plate

Specifications

• Alignment Plates: Used to position the printer accurately.
• Printer: Device to be placed between the Alignment Plates.
• Winders: Devices that assist in aligning the printer.
• Measurement: 12.5 mark on the Alignment Plates for positioning.

Arrange Alignment Plates

1. Position the Alignment Plates adjacent to each other with the shaped sides facing inward.
   Position Printer
2. Set the printer between the Alignment Plates, aligning its feet with the notches in the Plates.
3.  Slide the Alignment Plates inward beneath the printer until they press against the printer’s feet.
   Position Winders
4. Place the Winders firmly in position next to the outer bars of the Alignment Plates.
5. Align the Winders with the printer by sliding them forward/backward as necessary until the front base of the Winders is positioned at the 12.5” mark of the Alignment Plates.

Documents / Resources

LABELMATE Epson C60 Rewinder Alignment Plate [pdf] Instruction Manual Epson C60 Rewinder Alignment Plate, Rewinder Alignment Plate, Alignment Plate, Plate

References

• User Manual