LabelMark USBLMCV2 Marking Machine

Product Information

Specifications:

• Product Name: Marking Machine Driver
• Compatible Systems: Windows XP, Windows 7, Windows 8, Windows 10
• Driver Version: Ezcad2.12.2
• Bit Type: 32-bit and 64-bit

Product Usage Instructions

1. Step 1: Copy Files to Hard Disk
   Copy the Ezcad2.12.2 driver files from the provided U disk to the hard disk.
2. Step 2: Extract Compressed Package
   Extract the compressed package files of Ezcad2.12.2 to a specific location on the hard disk.
3. Step 3: Check Windows System
   Determine if your computer’s Windows operating system is 32-bit or 64-bit.
4. Step 4: Install Driver
   Open ‘This PC’, right-click and select ‘Manage’. Install the driver for the marking machine.
5. Step 5: Select Driver
   Select the appropriate driver (USBLMCV2) for the marking machine. Update driver software if necessary.
6. Step 6: Browse for Driver Software
   Browse your computer for the installed driver software.
7. Step 7: Choose Driver Folder
   Choose the correct driver folder based on your Windows system type (32-bit or 64-bit).
8. Step 8: Open Ezcad Software
   Open the Ezcad software and agree to the terms to complete the installation.

FAQ

• Q: What should I do if I cannot find the dongle? 
  A: If you cannot find the dongle, ensure that the driver is installed correctly, the marking machine is powered on, and the USB cable is connected between the computer and marking machine.

Marking machine driver installation

First step：
Will U disk of the following file (Ezcad.2.12.2 \ win7 win8 win10 winb win7 32drive) copy to the hard disk.

The second step
Will be (Ezcad.2.12.2 win7 win8 win10 X64drive \ winxp win7 32drive) 3 compressed package file extract.

Third step
Check the computer’s Windows system for 32-bit or 64-bit operating system

This computer is windows10 32-bit operating system

Corresponding to the driver for the hard drive inside the winxp win7 32 drive The fourth step
Install the driver, click This pc right, open Manage

The fifth step

• Select the driver USBLMCV2 not loaded
• If USBLMCV2 is not displayed, connect the computer to the marking cable with the USB cable and turn on the key switch and button
• Right click to select Update Driver Software
• Step 6
  Browse my computer for driver software Browse

Step 7

• Choose to copy to the hard drive winxp win 32 driver folder

Tips: If the computer is windows 64-bit operating system, please select win7 win8 win10 X64driver Next

lnstalling Driver Software

Close
The installation is complete and click Close

The Device Manager displays the driver name BJJCZ Device, indicating that the installation driver was successful

Step 8
Open the hard disk of Ezcad2.12.1

Open Ezcad2

Select l agree

Congratulations on your successful installation

If you can not find dongle! Software will work at demo state. Note that you have not installed the driver or the marking machine is not open, or the computer and the marking machine with USB cable is not connected.

Documents / Resources

LabelMark USBLMCV2 Marking Machine [pdf] Instructions Ezcad2.12.2, USBLMCV2, BJJCZ Device, USBLMCV2 Marking Machine, USBLMCV2, Marking Machine, Machine

References

• User Manual