SCT010T
Ф10mmAperture Split core current transformer
Characteristic
- Safety lock buckle, easy to install
- Built-in over-voltage protection device (TVS tube)
- Crimping terminal output
- Suspended type
Product application
- Portable instrument
- Household metering
- Monitor motor load
Product advantage
- Small volume，Light weight
- Low cost
- High turns，High precision
Installation diagram
Primary threading method（Firing line）
- Open the buckle
- Open upward
- Put in lead wire
- Fasten the buckle
Typical technical index：
- Material of core——Ferrite
- Working voltage——Phase voltage≤720V
- Working temperature——-25℃～+60℃
- Storage temperature——-30℃～+90℃
- Frequency range——50Hz～1KHz
- Dielectric strength——Input（bare conductor）/output AC 800V/1min 5mA 50Hz Output/Outer shell AC 3.5KV/1min 5mA 50Hz
Electrical parameters:（The following parameters are typical values and actual values will be subject to product testing）
Max. continuous input current: 120% of rated input
| Model | Input current |
Output | Turns ratio | Load resistance |
Accuracy | Linearity | Weight |
| SCT010T | 20A | 20mA | 1：1000 | 10Ω | 0.5%/1% | 1% | 45g |
| SCT010T | 20A | 5mA | 1：4000 | 10Ω | 0.5%/1% | 1% | 45g |
| SCT010T | 50A | 0.1A | 0.388889 | 10Ω | 0.5%/1% | 1% | 45g |
| SCT010T | 50A | 50mA | 1：1000 | 10Ω | 0.5%/1% | 1% | 45g |
| SCT010T | 50A | 16.6mA | 1：3000 | 10Ω | 0.5%/1% | 1% | 45g |
| SCT010T | 60A | 20mA | 1：3000 | 10Ω | 0.5%/1% | 1% | 45g |
| SCT010T | 80A | 80mA | 1：1000 | 10Ω | 0.5%/1% | 1% | 45g |
| SCT010T | 80A | 40mA | 1：2000 | 10Ω | 0.5%/1% | 1% | 45g |
| SCT010T | 80A | 26.6mA | 1：3000 | 10Ω | 0.5%/1% | 1% | 45g |
| SCT010T | 10A | 0.333V | – | built-in | 0.5%/1% | 1% | 45g |
| SCT010T | 20A | 0.333V | – | built-in | 0.5%/1% | 1% | 45g |
| SCT010T | 30A | 0.333V | – | built-in | 0.5%/1% | 1% | 45g |
| SCT010T | 50A | 0.333V | – | built-in | 0.5%/1% | 1% | 45g |
| SCT010T | 60A | 0.333V | – | built-in | 0.5%/1% | 1% | 45g |
| SCT010T | 80A | 0.333V | – | built-in | 0.5%/1% | 1% | 45g |
*Can be customized parameters/lead length/lead specifications according to user requirements.
Wiring schematic diagram：
Built-in sampling resistance Voltage output type Secondary doesn’t allow short circuit
TVS：Transient voltage suppressor Current output type Secondary doesn’t allow open circuit
Outline size： (in:mm)：
Documents / Resources
 |
YHDC SCT010T Aperture Split Core Current Transformer [pdf] Owner's Manual SCT010T, SCT010T 50A, SCT010T 60A, SCT010T 80A, SCT010T Aperture Split Core Current Transformer, Aperture Split Core Current Transformer, Split Core Current Transformer, Current Transformer, Transformer |
