xpr EX7 V2 Standalone Keypad
EX7 V2 Standalone Keypad
The EX7 V2 Standalone Keypad is a device designed for secure access control. It features a tamper switch and can be used with 12/24V DC or AC power supplies. The keypad includes memory positions for user codes and relays that can be assigned using the programming flowchart.
Features
- Secure access control
- Tamper switch
- Can be used with 12/24V DC or AC power supplies
- Memory positions for user codes and relays
Mounting
The keypad should be mounted using three 4 x 30mm screws and two M3 x 6mm security screws. The mounting hole should be 6mm in diameter. A jumper on the device should be open for normal operation.
Programming Flowchart
The programming flowchart allows you to assign user codes and relays to memory positions. To assign a user code, enter the master code followed by the memory position and user code. To assign a relay, enter the master code followed by the memory position, relay number, and desired mode of operation.
Applications
The EX7 V2 Standalone Keypad can be used for a variety of applications including alarm systems, push button access control, blinds, and gates.
FEATURES
- Operates on 12/24V AC/DC
Backlit keys (metal or plastic) - 99 User codes (1 to 8 digits)
- 30 second lockout after 8 invalid attempts
- 2 free tension LEDs (Red & Green)
- 4 relays (R1/R2/R3/R4: 3A/24V AC/DC)
- Relay in latch (00) or pulsed mode (01 to 99 sec)
- 2 Pushbuttons to operate relays
- Current Consumption Standby: 26 mA Maximum: 140 mA
- Dustproof and waterproof (IP65)
MOUNTING
WIRING
CONNECTING STRIKE TO RELAYS 
CONNECTING VOLTAGE FREE LEDS
CONNECTING LEDS FOR RELAY STATUS
TAMPER SWITCH
EXIT BUTTON
PROGRAMMING FLOWCHART
Notes
Memory Position for User Code is always 2 digits
* no need to validate with A
Assign Examples
- Ex.1: To assign User Code “12345” at Memory Position “5” and Relay 1 (2A) in Latch Mode assuming Master Code = 000
Pre 000Bss + 0 + 05 + 12345 + A + 7 + 05 + 1 + A + 1 + 00 + A + B. - Ex. 2: To assign User Code “6789” at Memory Position “6” and Relay 2 that activates for 5 seconds assuming Master Code = 000
APPLICATIONS
This product herewith complies with requirements of EMC directive 2014/30/EU. In addition it complies with RoHS2 directive EN50581:2012 and RoHS3 Directive 2015/863/EU.
Website: www.xprgroup.com
Documents / Resources
 |
xpr EX7 V2 Standalone Keypad [pdf] Instruction Manual EX7 V2 Standalone Keypad, EX7 V2, Standalone Keypad, Keypad |
