WILLED 3-in-1 Motion Sensor Light
INTRODUCTION
At $35.99, or roughly $6 per unit, the WILLED Motion Sensor Night Light (6-Pack) provides intelligent, hands-free illumination. Up to 16 hours of continuous light in always-on mode or up to two months in motion-sensing mode with typical use are possible with each unit’s 500 mAh rechargeable battery. With the supplied 3-in-1 USB-C cable, you can charge three lights at once, saving money and doing away with the need for throwaway batteries. Soft, single-side lighting is provided by the 2700 K warm white LED, which eliminates glare in gloomy places. Easy to install, these lights may be placed anywhere with magnets or the provided sticky sheets. They are perfect for corridors, restrooms, bedrooms, stairwells, and more. Reliable support is guaranteed by a 12-month warranty.
SPECIFICATIONS
| Model | WILLED Motion Sensor Night Light (6-Pack) |
| Price | $35.99 total (~$6 each) |
| Battery | Built-in 500 mAh rechargeable (USB-C via 3-in-1 cable) |
| Runtime (Always-On Mode) | ~16 hours |
| Runtime (Motion Sensor Mode) | Up to ~2 months |
| LED Color Temp | 2700 K warm white |
| Brightness | Approx. 20 lumens |
| Motion Sensor Range | ~10 feet / 3 meters, 120° detection angle |
| Mounting Options | Magnetic or adhesive iron sheet (included) |
| Control Method | Touch-activated toggle (no remote) |
| Dimensions | ~0.62″ D × 3.14″ W × 1.57″ H |
| Material | Plastic |
| Warranty | 12-month replacement guarantee |
| Included Components | 6 × Night Lights, adhesive sheets, power cable (USB-C cable) |
WHAT’S IN THE BOX
- 6 × Motion Sensor Night Lights
- Magnetic base + double-sided adhesive iron sheets
- 3-in-1 USB-C charging cable
- Manual
FEATURES
- Rechargeable convenience: Built-in 500 mAh battery eliminates the need for disposable batteries, saving both money and waste.
- Fast, multi-unit charging: Charge up to three lights at the same time via a single USB-C cable for hassle-free power management.
- Long continuous runtime: Delivers up to 16 hours of uninterrupted light in Always-On Mode—perfect for overnight or extended use.
- Exceptional standby life: Operates for up to 2 months in Motion Sensor Mode, activating only when needed.
- Smart motion detection: Senses movement within 10 feet (3 meters) and a wide 120° angle for reliable activation.
- Eye-friendly warm glow: 2700K light temperature produces a soft, non-glaring illumination that’s easy on the eyes at night.
- Directional lighting design: Single-sided light projection focuses brightness where you need it most without unnecessary glare.
- Dual installation options: Easily mount with the built-in magnet on metal surfaces or use adhesive pads for tool-free setup.
- Simple touch control: Quickly turn lights on or off manually without needing a remote.
- Modern USB-C charging: Universal, future-ready charging port ensures broad compatibility.
- Slim and compact build: Fits easily in narrow areas such as stair risers, corners, and tight hallways.
- Energy-efficient LEDs: Provides bright illumination while consuming minimal power, ensuring a longer lifespan.
- Warranty assurance: Covered by a 12-month warranty for peace of mind.
- Versatile placement: Ideal for stairs, corridors, closets, bathrooms, and other dark spots.
- Safety enhancement: Helps prevent trips and falls by lighting up walkways during nighttime movement.
SETUP GUIDE
- Unpack and check contents: Ensure all lights and accessories are present and undamaged.
- Charge before first use: Fully power up with the included USB-C cable to maximize initial battery life.
- Prepare mounting surface: Clean and dry the installation area for secure adhesion or magnet contact.
- Mount your light: Attach magnetically to a metal surface or use the adhesive pad on a smooth, flat surface.
- Position for best coverage: Angle or place the light so it faces the pathway you want illuminated.
- Select operating mode: Use Always-On Mode for constant lighting or Motion Sensor Mode for energy-saving activation.
- Test motion range: Walk within 10 feet to confirm the sensor is working correctly.
- Observe auto-off timing: The light should turn off after about 20 seconds without movement.
- Recharge when dimming: Remove and reconnect to a charger when brightness noticeably drops.
- Quick reattachment: Once charged, simply snap back in place magnet or adhesive will still hold.
- Experiment with placement: Try different spots to find optimal coverage for your space.
- Store charging cable nearby: Keep it handy for regular recharges.
- Dispose responsibly: Follow battery disposal guidelines when the product reaches end of life.
CARE & MAINTENANCE
- Clean gently: Use a soft, dry cloth and avoid harsh cleaning agents.
- Maintain sensor clarity: Keep dust and dirt away from the motion sensor and lens.
- Protect battery health: Recharge before the battery is fully drained to prolong lifespan.
- Refresh adhesive if needed: Replace worn pads for secure mounting—magnetic option remains reusable.
- Avoid moisture: Designed for indoor use, so keep away from water and damp environments.
- Prevent heat damage: Store away from direct sunlight and extreme temperatures.
- Keep charging components clean: Ensure USB ports and cables are free of debris for consistent charging.
- Check motion responsiveness: Test occasionally to confirm sensor accuracy.
- Handle with care: Avoid rough handling to prevent cracks in the casing.
- Store properly: Keep in a cool, dry location when not in use for long periods.
- Save spare parts: Keep extra adhesive pads handy for future reinstallation.
- Review warranty terms: Check coverage before discarding a defective unit.
- Prepare surfaces before reapplication: Always clean the mounting area before attaching again.
TROUBLESHOOTING
| Issue | Solution |
|---|---|
| Light not turning on | Ensure fully charged, clean contact points. |
| Motion sensor not activating | Check in dark conditions (<20 lux), ensure mode set to motion. |
| Light does not turn off | Wait 20 s after motion stops—ensure not tangled. |
| Poor mounting adhesion | Clean surface; reapply with sticky pad or reposition magnet. |
| Dim light output | Battery low—recharge fully. |
| Doesn’t stay magnetically | Clean surface; increase magnet-to-metal contact. |
| Faulty USB charging | Swap cable or port; ensure proper voltage. |
| Sensor triggers randomly | Place away from heat sources or direct airflow. |
| Battery drain fast | Reduce always-on use; use motion mode. |
| No warm light output | Replace unit if LED fails; check warranty. |
PROS & CONS
Pros:
- Easy to install with no tools required.
- Long motion-based runtime saves energy.
- Soft warm light—great for night safety.
- USB-C charging modern and efficient.
- Reliable motion sensing promotes fall prevention.
Cons:
- Manual removal needed for recharging.
- Adhesive may need replacement over time.
- Not suitable for outdoor or wet areas.
- Brightness is modest—ideal for mood lighting rather than tasks.
- No remote control or adjustable brightness levels.
WARRANTY
Includes a 12-month replacement warranty. Contact the manufacturer promptly if any issues arise.
FREQUENTLY ASKED QUESTIONS
What comes in the WILLED 3-in-1 Motion Sensor Light package?
The package includes 6 rechargeable motion sensor lights, adhesive iron sheets, and a 3-in-1 Type-C charging cable.
How bright is the WILLED 3-in-1 Motion Sensor Light?
Each unit produces 20 lumens of 2700K warm white light, enough for safe navigation without glare.
What modes are available on the WILLED 3-in-1 Motion Sensor Light?
It has motion sensor mode (auto-on in darkness when movement is detected) and always-on mode.
How does the motion sensor work in the WILLED 3-in-1 Motion Sensor Light?
In motion sensor mode, it activates when detecting movement within 3 meters/10 feet and a 120° angle, turning off after 20 seconds without motion.
How long does the WILLED 3-in-1 Motion Sensor Light run on a full charge?
In always-on mode, up to 16 hours. In motion sensor mode, up to 2 months, depending on usage.
How do you charge the WILLED 3-in-1 Motion Sensor Light?
Use the included 3-in-1 Type-C cable to charge three units at once. A full charge typically takes a few hours.
What’s the battery capacity of the WILLED 3-in-1 Motion Sensor Light?
Each light has a 500mAh rechargeable battery, saving up to 80 AA batteries per year compared to disposable-powered lights.