Unipos Module BIO Addressable Modular System 7000M
General Description
Module BIO has 7 Devices
DIN rail support up to 5 pcs. Please see the User Manual 7000M.
for more information.
Installing Module On DIN Rail
After mounting on the DIN rail, slide carefully and connect with the front one module
Module BIO
| Module BIO | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 |
| Relay Output 1 – Normal
Open |
Relay Output 1 – COM | Relay Output 1 – Normal Close | Relay Output 2 – Normal Open | Relay Output 2 – COM | Relay Output 2 – Normal Close | Monitored Output 1 “+” | Monitored Output 1
“-” |
Monitored Output 2 “+” | Monitored Output 2
“-” |
Monitored Input 1 “+” | Monitored Input 1 “GND” | Monitored Input 2 “+” | Monitored Input 2 “GND” | User Output “+” | User Output “GND” |
Technical Data
Monitored output
| Number of outputs per module | 2pcs |
| Type | potential |
| Electrical characteristics | (27,6 +1/-8) VDC/0,7A |
| End Of Line (EOL) | 1,5kΩ resistor |
*EOL shall be connected to the end of the cable connected to pins 7 – 8 and 9–10 for proper work of the monitored output Relay outputs:
| Type | potential free, switching |
| Electrical characteristics | 0,5A/125VAC; 1A/30VDC |
| Monitored inputs: | |
| Number of inputs per module | 2pcs |
| Type | monitored |
| EOL | 3,3kΩ resistor |
*EOL shall be connected to the end of the cable connected to pins 11–12 and 13–14 for proper work of the monitored input User output
| User output | |
| number of outputs per module | 1pcs |
| Type | potential |
| Electrical characteristics | (27,6 +1/-8) VDC/0,7A |
| Total module outputs consumption | please see p.2.5 User Manual 7000M |
CUSTOMER SUPPORT
www.unipos-bg.com
The specifications described herein are subject to change without notice.
Documents / Resources
 |
Unipos Module BIO Addressable Modular System 7000M [pdf] Instruction Manual Module BIO Addressable Modular System 7000M, Module BIO, Addressable Modular System 7000M, Modular System 7000M, System 7000M |
