Contents hide
1 U-PROX SE Mini Universal Reader
2 Installation:
3 Configuration:
4 Usage:
5 FCC
6 IC STATEMENT
7 TECHNICAL SPECIFICATIONS
8 INSTALLATION
9 CONNECTION
10 FAQS
11 Documents / Resources
11.1 References

U-PROX -LOGO

U-PROX SE Mini Universal Reader

U-PROX-SE-Mini-Universal-Reader-PRODUCT

Specifications:

  • Brand: U-Prox
  • Model: U-Prox SE mini
  • Interfaces: Wiegand, RS-232, Mifare, OSDP, NFC, Mobile ID, Payment cards
  • Compatibility: Works with the U-Prox Mobile ID application and U-Prox IDs
  • Compliance: Radio Equipment Directive 2014/53/EU, Directive 2011/65/EU (RoHS), FCC Class B digital device

Installation:

  1. Mount the U-Prox SE mini reader securely at the desired access point.
  2. Connect the necessary interfaces such as Wiegand, RS-232, or NFC based on your system requirements.
  3. Ensure proper power supply to the reader.

Configuration:

  1. Access the U-Prox Mobile ID application and pair the U-Prox SE mini reader with your mobile credentials.
  2. Adjust settings on the reader as needed for your access control requirements.

Usage:

  1. Present your mobile credentials or proximity identifiers near the U-Prox SE mini reader.
  2. The reader will authenticate the credentials and grant access if authorized.

UNIVERSAL MINIATURE READER U-PROX access control system declares, that the U-PROX SE mini complies with the Radio Equipment Directive 2014/53/EU a nd with the Directive 2011/65/EU (RoHS) The original Declaration of Conformity is availab le on the website www.u-prox.systems in the Certificates section.

U-PROX-SE-Mini-Universal-Reader-FIG- (1)

FCC

This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference,
  2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

IC STATEMENT

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).

Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

RF warning for Portable device:
The device has been evaluated to meet the general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

TECHNICAL SPECIFICATIONS

U-PROX-SE-Mini-Universal-Reader-FIG- (16)

PROGRAMMING

U-PROX-SE-Mini-Universal-Reader-FIG- (3)

The reader is supplied without the engineering password

INSTALLATION

U-PROX-SE-Mini-Universal-Reader-FIG- (4)

  • Range decreases on metal
  • Connect the yellow wire for synchronization.

U-PROX-SE-Mini-Universal-Reader-FIG- (5)

CONNECTION

Wiegand

U-PROX-SE-Mini-Universal-Reader-FIG- (6)

Using twisted pair

U-PROX-SE-Mini-Universal-Reader-FIG- (7)

TouchMemory

U-PROX-SE-Mini-Universal-Reader-FIG- (8)

RS232

U-PROX-SE-Mini-Universal-Reader-FIG- (9)

OSDP

U-PROX-SE-Mini-Universal-Reader-FIG- (10)

SET OR RESET ENGINEER PASSWORD

U-PROX-SE-Mini-Universal-Reader-FIG- (11)

PROXIMITY-DOOR” MODE

U-PROX-SE-Mini-Universal-Reader-FIG- (12)

  • The reader is activated by the presence sensor.
  • Read range 5-10 cm

“DOOR” MODE

U-PROX-SE-Mini-Universal-Reader-FIG- (13)

  • The reader is always active.
  • Read range 50-60 cm

“GATE/BARRIER” MODE

U-PROX-SE-Mini-Universal-Reader-FIG- (14)

  • The reader is always active.
  • Read range 1 – 15 m

U-PROX MOBILE ID

U-PROX-SE-Mini-Universal-Reader-FIG- (15)

U-PROX-SE-Mini-Universal-Reader-FIG- (2)

FAQS

Q: What should I do if the device causes interference?
A: If interference occurs, try turning the device off and on. If the issue persists, follow the guidelines provided in the manual to address the interference.

Q: How can I ensure proper operation of the U-Prox SE mini?
A: Make sure to install and use the device according to the instructions provided. Keep the device updated with the latest firmware to maintain optimal performance.

 

Documents / Resources

U-PROX SE Mini Universal Reader [pdf] Instruction Manual
SE Mini Universal Reader, Mini Universal Reader, Universal Reader, Reader

References

Leave a comment

Your email address will not be published. Required fields are marked *