StarTech P2ADDH462-KVM-SWITCH 2 Port Dual Monitor HDMI DisplayPort KVM Switch User Guide

P2ADDH462-KVM-SWITCH 2 Port Dual Monitor HDMI DisplayPort KVM Switch

Specifications

  • Product Name: 2-Port Dual-Monitor HDMI/DisplayPort KVM Switch –
    4K 60Hz – USB 5Gbps
  • Product ID: P2ADDH462-KVM-SWITCH

Product Information

For the latest software, manuals, product information, technical
specifications, and declarations of conformance, please visit:
www.StarTech.com/P2ADDH462-KVM-SWITCH

Hotkey Commands

Hotkey commands are keystroke sequences that initiate
computer/device functions and can be used to initiate KVM Switch
functions. A hotkey command sequence must be initiated by the
HK_LCode (HotKey Leading Code), followed by 1-2 additional
keystrokes. Successful hotkey command inputs result in a high-pitch
beep. Unsuccessful hotkey command inputs result in a low-pitched
beep.

Notes:

  • All keystroke combinations must be entered in rapid
    succession.
  • Press and release the indicated keys, unless otherwise
    specified.

Hotkey Commands List

HK_LCode Function
HK_LCode + 1 ~ 2 Option 1.1
HK_LCode + F1 ~ F2 Option 1.2

Changing the HK_LCode

To change the HK_LCode, use one of the following options:

  • Hotkey Command HK_LCode + 1 ~ 2 or HK_LCode + F1 ~ F2
  • HK_LCode + W
  • HK_LCode + Q

USB/Video/Audio Ports

To view manuals, FAQs, videos, drivers, downloads, technical
drawings, and more, visit www.startech.com/support.

Hotkey Command Revision: April 21, 2025

FAQ

Q: How do I switch between connected devices using the KVM
switch?

A: To switch between connected devices, use the hotkey command
sequence specified in the user manual. Press the HK_LCode followed
by the corresponding keys to switch seamlessly.

Hotkey Command Guide

2-Port Dual-Monitor HDMI/DisplayPort KVM Switch – 4K 60Hz – USB 5Gbps

Product IDs
P2ADDH462-KVM-SWITCH
Product Information
For the latest software, manuals, product information, technical specifications, and declarations of conformance, please visit: www.StarTech.com/P2ADDH462-KVM-SWITCH
Hotkey Commands
Hotkey commands are keystroke sequences that initiate computer/device functions and can be used to initiate KVM Switch functions. A hotkey command sequence must be initiated by the HK_LCode (HotKey Leading Code), followed by 1-2 additional keystrokes. Successful hotkey command inputs result in a high-pitch beep. Unsuccessful hotkey command inputs result in a low-pitched beep.
Notes: – All keystroke combinations must be entered in rapid succession. – Press and release the indicated keys, unless otherwise specified.
HK_LCode
Option 1.1
· Scr Lck + Scr Lck
Option 1.2
To change the HK_LCode:
· HK_LCode + H + Esc, Caps, or F12
· Alternatively, press and hold the front Host Selection Button for PC2, until 2 beeps are emitted, then press the desired leading hotkey of Scr Lck, ESC, Caps, or F12

Hotkey Command HK_LCode + 1 ~ 2
or HK_LCode + F1 ~ F2
HK_LCode + W
HK_LCode + Q
HK_LCode + F5 ~ F6
HK_LCode + Up Arrow Key
or HK_LCode + Down Arrow Key HK_LCode + B HK_LCode + S
HK_LCode + H + “x”

Function
· Select PC 1 or PC 2.
· Disable the binding between PC (USB/Video) and Audio when switching between PC 1 or PC 2.
· Allows switching of PC Ports USB and Video functions, while Audio does not switch
· Enable the binding of PC (USB/Video) and Audio switching.
· Audio will switch with the PC Ports USB and Video functions.
· Enabled by default. · Audio Unbound: Selects only the audio and mic source
between PC 1 or PC 2, does not switch USB and Video · Audio Bound: Select PC 1 or PC 2 and their respective
USB/Video/Audio Ports
· Select the next/previous PC Port. · If Audio is unbound, the audio will not switch
· Disable the Beep that indicates HotKey Command Inputs.
· Enable Autoscan. · Press any key to stop the Autoscan function.
· Define the Autoscan time delay. · “x” = 1 – 10sec, 2 – 20sec, 3 – 30sec, 4 – 40sec, 5 – 50sec, 6 – 60sec, 7 – 70sec, 8 – 80sec, 9 – 90sec, 0 100sec

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Hotkey Command Revision: April 21, 2025

Documents / Resources

StarTech P2ADDH462-KVM-SWITCH 2 Port Dual Monitor HDMI DisplayPort KVM Switch [pdf] User Guide
P2ADDH462-KVM-SWITCH, P2ADDH462-KVM-SWITCH 2 Port Dual Monitor HDMI DisplayPort KVM Switch, P2ADDH462-KVM-SWITCH, 2 Port Dual Monitor HDMI DisplayPort KVM Switch, Dual Monitor HDMI DisplayPort KVM Switch, HDMI DisplayPort KVM Switch, DisplayPort KVM Switch, KVM Switch, KVM Switch

References

Leave a comment

Your email address will not be published. Required fields are marked *